Hardy Process Solutions

- Floor Scales



The HI AFS Series of floor scales can be used for general process (mount a machine or vessel to it) pallet, drum, or shipping weighing applications. They feature a rugged structural rib design with a ¼ inch thick steel smooth or diamond plate deck that can withstand over loads of up to 150% of their capacity. Their low height of three inches and 100% end loading allow the easy access and maneuvering of all types of load handling equip met such as drum movers, pallet jacks or fork lifts onto the scale.

The ANY-WEIGH line of floor scales is designed and built for harsh chemical and washdown industrial environments, yet is easy to use and install with the latest advancements in weighing technology. Gone are the manual multi-turn potentiometers for corner adjusting. Just level the deck, attach the included twenty-foot cable, calibrate (if a C2 compatible instrument, set your reference), verify and begin weighing.

Available in eight sizes from 30 x 30 inch to 6 x 8 foot in 1, 2.5, 5, and 10 thousand pound capacities, the ANYWEIGH floor scales have two threaded holes in the decks for attaching eyebolts to facilitate installation and cleaning.

C2 Electronic Calibration
With a push of a button in a Hardy Controller, C2 enables a fast, accurate, electronic calibration without test weights. The C2 system reduces downtime for installation or repairs and eliminates test weight related injuries.

Integrated Technician
Each scale has built-in INTEGRATED TECHNICIAN (IT) circuitry. When coupled with a Hardy controller, the scale provides diagnostic and troubleshooting tools that read individual weights and voltages to aid you in isolating problems and ensure the integrity of your scale system. In short, IT helps you solve problems should any occur.

Service By Design
Along with C2 and Integrated Technician, all Hardy ANYWEIGH floor scales feature a top access plate for quick and easy access to our Nema 4x junction box, ensuring that general maintenance is easier and more time-efficient.

Hermetically Sealed Load Sensors
The heart of any scale is the load sensor. All ANY-WEIGH floor scales come standard with Hardy ADVANTAGE stainless steel, true hermetically-sealed sensors — sealed at both the gauging area and cable entry for long life. All are matched and calibrated for mV/V and mV/V/ohm. This eliminates the need for corner adjustment pots and allows a sensor to be replaced without calibration. Instead of the typical threaded hole into which the load cell foot is attached, the ANYWEIGH sensors use a blind hole technique ensuring the load is applied at a precise location, providing an accurate reading, weighment after weighment.

Rugged, Low Profile Design
With a deck height of only three inches and 100% end loading, these floor scales enable easy, anyside access and maneuvering of all types of load handling equipment onto the scale.

Each scale features a field-proven, rugged structural rib design with 1/4 inch thick smooth or diamond plate deck that can withstand overloads of up to 150% of its capacity. A durable rubberbased foot for each load sensor is height adjustable from below the platform.

Process Weighing

  • Check Weighing
  • Batching
  • Filling
  • Inventory
  • Shipping
  • Force

0.25 inch thick smooth or safety tread deck

3 inches (adjustable 0.275” 7mm)

Overload Capacity
150% of rated scale capacity

End Loading
100% of rated scale capacity

Cable Length
Platform to Instrument - 20 feet
(for longer cable lengths, contact the Factory)

Stainless Steel - Type 304
Mild Steel - Type A36 carbon steel coated with two part enamel Paint
Epoxy modified alkyd enamel (mild steel models only)

Load Sensor
C2 stainless steel
hermetic seal
blind hold loading

Junction Box
Nema 4x stainless steel

Summing Card
Individual load sensor terminal blocks

Scale Excitation
5vdc +/-5%
Optional Eye Bolts
1/2 - 13 x 1-1/2”, 2-1/4” diameter eye

NTEP Pending

Customer reviews

No reviews were found for ANY-WEIGH - Floor Scales. Be the first to review!