Aqua Guard - Continuous Self Cleaning Moving Media Screen
The Aqua Guard is a rugged and proven self-cleaning in-channel screen that uses a unique filter element system designed to automatically remove a wide range of floating and suspended solids from a wastewater stream. These unique elements are woven together on stainless steel shafts to form the endless moving belt that collects, conveys and ultimately discharges the solids that are being removed from the treated wastewater. The Aqua Guard is capable of performing in a wide range of applications and element spacing settings – from 1mm to 30mm –depending on the requirements of the specific treatment process.
Solids larger than the nominal screen opening contained in the wastewater stream are captured on the filter elements and conveyed upward on the face of the filter belt to be discharged at the rear of the unit. The Aqua Guard® uses a two-stage screening method that allows the screen to filter out solids much smaller than the screen opening. This is achieved through coarse filtration on the leading edge of the belt, while fine screening takes place on the recessed face resulting in minimal headloss.
The Aqua Guard utilizes three principle cleaning modes. The elements themselves are self-cleaning. As the tip of one row of elements passes between the shanks of the elements on the lower row, the elements are cleaned of collected solids. The unit is also equipped with a rotating brush that provides positive removal of any additional solids that might remain on the belt. Finally, optional water sprays can provide a final polishing on the element belt in especially rigorous applications.
The Aqua Guard comes in standard screen widths from 1.0’ to 9.0’ depending on the model chosen with flow rates up to 100 MGD through a single unit.
Two frame styles are available: Type A – The Pivoting Design and Type T – The Fixed Frame Design.
- Low power consumption
- Self-cleaning / intermittent operation
- Simple / robust design
- No Submerged bearing / all moving parts above the waterline
- Pivots out of the channel
- Coarse and fine screening in one unit
- Flows up to 100MGD in a single unit
- Delivered fully assembled
- No attachment to sides or bottom of channel
- Low operation and maintenance costs
- High capture rates
- High flow and solids loading capacity
- Ease of installation
- Fully customizable