Aquas - Model SMR36 Series -Blue Green Algae Analyzer

SHARE

The Blue Green Algae Analyzer is connected directly via RS485 communication interface, providing simple, reliable, cost-saving process data with remote monitoring,calibration, configuration and diagnostics capabilities.Housing in a robust IP68 proof enclosure, 1500 N tensile strength Kevlar reinforced cable, up to 1.2 km digital data transmission, the transmitter is ideally used in water/wastewater industry.

Most popular related searches

blue-green algae monitoring

blue-green algae

water monitoring method

surface water monitoring

remote monitoring

wastewater industry

water monitoring

water protection

All-in-One Compact Housing, Built-in Transmitter and Sensors
Robust IP68 Water Submersible Protect
Plug & Play, On-line Realtime Measurement
Ultra Low Power Consumption, Ideal for Outdoor Applications
1500 N Tensile Strength Kevlar Reinforced Cable
Surge Protection for Power and RS485 Communication
RS485 Digital Communication, Minimize Cabling and Engineering Cost
Standard Modbus RTU Protocol, Direct Connected with PLC, HMI
Sapphire Glass Windows to Prevent Scratch
Innovative Nano Coating to Remain Window Clean
Optional Auto Cleaning Wiper, Less Maintenance
Onboard Memory Allowing Users Easily Calibrate and Configure Sensor at Lab and Distribute to Various Fields Sites
Software Tool for Data Monitoring, Calibration , Configuration and Diagnosiss

Parameter:

SMR36-1: Phycocyanin (PC)
SMR36-2: Phycoerythrin (PE)

Measurement range:

SMR36-1: 0~500 μg/L; 0~200,000 cells/ml
SMR36-2: 0~300 μg/L; 0~600,000 cells/ml

Accuracy: Linearity R2 > 0.999 for serial dilution of Rhodamine WT solution equivalents
Resolution: 0.01 μg/L; 1 cells/ml
Repeatability: ±1% FS
Light source:

SMR36-1: LED 580 nm
SMR36-2: LED 530 nm

Operation pressure: Max.10 Kgf/cm2
Operating Temperature: 0~50 °C
Process flow rate: Max. 3 m/s
Response time: 3 secs
Protection: IP68
Housing: SS316L
Dimension:

Φ 34 X 226 mm (with wiper)
Φ 22 X 130 mm (no wiper)

Weight:

analyzer: approx.500 g
cable: 80 g/m

Output Signal: RS485 (Modbus RTU protocol), 19,200 bps, 8 data bits, no parity, 1 stop bit; 4~20 mA (optional)
Data Resolution: 16 bits (0.001% FS)
Surge Protection: 4000 V DC
Power: 3.6~12 V DC ±10%, 5 mA
Protection: polarity, overload, short circuit
Safety: CE, FCC

Typical Applications

Surface water

Measurement Method

It is based on fluorescent optical lechnology. A fluorometer generates the wavelength of light required to excite the analyte of interest, it selectively transmits the wavelength of light emitted, then it measures the intensity of the emitted light. The emitted light is proportional to the concentration of the analyte being measured.