- Home
- Companies
- ENS Instruments
- Products
- ENS Instruments - Model Smart PM - ...
ENS Instruments - Model Smart PM -Atmospheric Particulate Matter Sampler
The Smart PM Atmospheric Particulate Matter Sampler is a sophisticated device designed for precise measurement of airborne particles, particularly targeting particulate matter with sizes of 2.5 and 10 microns. This advanced sampler meets the EPA 40 CFR Part 50 reference method standards for PM10 determination, providing compliance and ensuring accuracy in environmental monitoring. It is also adaptable for PM2.5 sampling through the use of a specialized M10 cap and 2.5-micron impactor cut separator. Additionally, the device is compatible with the EN 12341 method, allowing for sampling at 2.3 cubic meters per hour for PM10 and 1 cubic meter per hour for PM2.5. With its wide regulation range and precise electronic flow sampling control, the Smart PM ensures reliability under actual or standard atmospheric conditions. Key data such as sampling flowrate, static or barometric pressure, and ambient temperature is stored in the device's internal memory and can be backed up via a USB interface.
Smart PM Atmospheric Particulate Matter Sampler is an advanced sampler used to determine particulate matter of size 2.5, 10 microns and smaller concentration in atmosphere. The wide regulation range and the accurate electronic flow sampling control at either actual or standard conditions, makes Smart PM in accordance with the reference methods.
The sampler complies with the EPA 40 CFR Part 50 reference method for PM10 determination. It can also be used for PM2.5 sampling with M10 cap and 2.5 micron impactor cut separator. The sampler is also suitable for the EN 12341 method for sampling PM 10 at 2.3 m3 / h and PM 2.5 to 1 m3 / h.
The following data measured during sampling is stored in the internal memory. Data can also be backed up to a flash drive via the USB interface:
- Serial number
- Sampling start and end date/time
- Sampling duration in hours and minutes
- Mean volumetric flow rate in m³/h and Nm³/h
- Sampled volume in m³ and Nm³
- Mean air pressure/temperature/humidity
- Mean pressure difference at the filter
- Sampling Flowrate
Device : Orifice meter
Range : 10 ÷ 60 l/min
Accuracy : Better than ± 1%
Resolution : 0.01 l/min - ABS, Pressure(Static or Barometric)
Range : 0 ÷ 105 kPa (1050 mBar)
Accuracy : Better than 1% of measure ± 0.01 kPa
Resolution : 0.01 kPa (0.1 mBar) - Ambient Temperature (PT100 Sensor)
Range : -20 ÷ 80 °C
Resolution : 0.01 °C
- Flowrate operative range : 10 ÷ 60 l/min
- Display : 5.0” Graphic Color
- Data Port : USB 2.0
- Printer Port : Bluetooth
- Internal Memory : 16GB
- Power supply : 220 Vac ±10% 50/60Hz
- Materials : % 100 Aluminum
- Keyboard : Polycarbonate, tactile effect keys
- Dimensions : 450 x 274 x 535 mm (W x D x H)
- Weight : 14 kg
- PM 2.5 or pm10 Size Separator
- Precise sampling flowrate is directly controlled with a mass flow meter
- Higher quality of the data due to automated parameters control
- It can work with all sampling heads EPA or EN
- Large color screen
- A diaphragm type pump with AC motor for reliable & low noise operation
- Construction suitable for outdoor use