Dri-Prime - Model HL260M -Automatic Self-Priming Centrifugal Pump

FromAquatech Dewatering Company

SHARE

The Godwin Dri-Prime 10-inch x 8-inch (250 mm x 200 mm) HL260M automatic priming centrifugal pump is perfect for your biggest jobs. With solids-handling to 2` (50 mm) in diameter, maximum flows of 4,760 GPM(1,081 m3/h) and 500` (150 m) of total dynamic head, and indefinite dry-running capabilities, the HL260M can be found in a wide variety of applications requiring high volume and high head.

Most popular related searches

centrifugal pumping

centrifugal pump

non-return valve

automatic centrifugal pump

self-priming centrifugal pump

dry running capability

automatic centrifuge

automatic self-priming pump

Fully automatic priming from dry to 28` (8.5 m) of suction lift.
Direct drive automatic priming high volume centrifugal pumps with Godwin’s original double venturi Dri- Prime priming system. Also available in electric drive.
Extensive application flexibility — will handle raw sewage, slurries and liquids with solids up to 2" (50 mm) in diameter.
Dry running, high pressure oil bath mechanical seal with abrasion-resistant solid silicon carbide faces.
All cast steel construction with cast steel impeller.
Standard Caterpillar C-18 engine.

Pipe Connections: 10"x8" (250 mm x 200 mm) ASA150#
Max. Capacity: 4,760 GPM (1,081 m3/h)
Max. Head: 500` (150 m)
Solids Handling: 2" (50 mm)
Impeller Diameter: 22" (540 mm)
Max. Op. Temp.: +176°F (80°C)
Max. Working Press.: 232 psi (16 BAR)
Max. Suction Press.: 87 psi (6 BAR)
Max. Test Press.: 348 psi (24 BAR)
Max. Op. Speed: 1800 RPM
Fuel Tank Capacity: 375 gal (1416 l)

Pump Casing & Suction Cover: Cast steel
Impeller: Cast steel
Non-Return Valve Flap: High nitrile rubber
Non-Return Valve Body: Cast iron
Mechanical Seal: Solid silicon carbide
Pump Shaft: Nickel chrome steel
Wearplates: Nickel chrome cast iron