- Home
- Companies
- Actini Group
- Products
- Actini - Batch Neutralization System ...
Actini - Batch Neutralization System (BNS)
The ACTINI Batch Neutralization System (BNS) has been specially designed to adjust the pH of effluent from batch decontaminators. Featuring a wide range of options, the system is modular and can perfectly handle wastewater from other sources.
- Model :Batch Neutralization (BNS)
- Capacity : 1.000 to 16.000 liters / day
- Automatic injection of caustic and acid to neutralize effluent pH
- The volume of the tank allows sufficient contact time (30 minutes) to generate the chemical neutralization reaction without any residual reaction after pH control.
- pH adjustment in the tank is managed automatically by the pH probe located in the recirculation loop, which controls the acid and caustic injection pump.
- The mixing pump stirs the tank volume with an hourly flow rate more than 5 times its volume, ensuring optimum dilution and mixing of the concentrated chemical solutions injected.
- Once the pH of the effluent has been adjusted, a high-flow pump empties the tank and measures the pH.
- If the pH is within the correct range, the effluent is discharged. If the pH is out of range, the effluent volume is returned to the neutralization tank for further treatment.
- Plate heat exchanger for effluents above 60°C
- Neutralization tank redundancy (2nd tank)
- Inlet for connection to customer’s wastewater
- Dedicated electrical cabinet with HMI
- Dedicated chemical solution tanks
Steam
The Overheated Water process (AES) involves injecting controlled steam into a water loop circulating through the double jacket of the exchanger.
A “sonic” nozzle facilitates the diffusion in the coolant. The water thus heated is used to heat treat the liquid flowing in the internal aseptic tube. The equipment is quiet and the wide range of nozzles ensures precise temperature control.
Hot water
ACTINI also designs pasteurization and heating units using a Hot Water heating module (AEC) operating from electric heaters.