Binsfeld Engineering Inc
- Home
- Companies
- Binsfeld Engineering Inc
- Products
- Binsfeld TempTrak - Model RT416-PB - ...
Binsfeld TempTrak - Model RT416-PB -Multi-Channel Wireless Temperature Measurement System
The RT416-PB is a multi-channel wireless temperature measurement system designed as an upgrade for CAN bus systems to monitor and control temperature on heated godet roll shells on filament spinning machines. Digital circuitry in the rotating transmitter and the stationary receiver are immune to electrical noise and drift. Generous 5 mm clearance between the rotating and stationary parts eliminate rubbing or impacting – a common failure cause in other designs. Error detection modes protect heater from damage and expedite troubleshooting in the event of a sensor or other failure. The system features Profibus DP digital communication. It consists of three main components: Controller, Rotating Module with mounting base, and Stationary Module.
Most popular related searches
remote temperature monitoring
temperature monitoring system
temperature monitoring
remote monitoring system
remote monitoring
temperature transmitter
digital temperature controller
- Profibus DP digital communication
- Built-in PID loop control
- Generous 5 mm rotor-stator clearance
- Digital circuitry from sensor input to signal output
- Accurate – Within ±0.5°C across entire sensing range.
- Robust – Fully encapsulated electronics with generous clearance between rotor and stator.
- Versatile – Other I/O schemes available
- Digital Circuitry – Maintains calibration and is immune to electrical noise and drift.
- Intelligent – Protects heater if sensor or transmitter malfunctions.
- Product Support – Backed by BEI’s reputation for the strongest customer support in the industry including a two-year warranty.
- Warranty Information – Binsfeld Engineering Inc. warrants this product to be free from defective materials and workmanship for a period of two years from the date of delivery to the original purchaser and that this product will conform to specifications and standards published by Binsfeld Engineering Inc. Upon evaluation by Binsfeld Engineering Inc., any product found to be defective will be replaced or repaired at the sole discretion of Binsfeld Engineering Inc. Our warranty is limited to the foregoing. Binsfeld Engineering Inc. disclaims any warranty of merchantability or fitness for intended purpose.
ROTOR
- Number of Sensors: 6
- Sensor connection: M3 set screw terminals with 2.38mm hole for ferrule access
- Input Sensor Type: PT1000 RTD (1000Ω at 0° C, α =.00385), standard
- Sensor Range: 0-300° C
- Speed: 10,000 RPM
- Operating Temperature: 0-85° C
- I/O Connectors: 3-Conductor pluggable screw terminal
- Status Indicator Lights: One for power and one for data
- Operating Temperature: 0-85° C
- Supply Voltage: 24 VDC (±5 VDC)
- Supply Current: 500 mA maximum, 250 mA nominal, 1000 mA fuse protected
- Supply Connector: 2-conductor pluggable screw connector
- Communication Connection: DB-9F with standard Profibus pin-out) for operation as Profibus-DP slave; (DIP switch for node address setting)
- Operating Temperature: 0-70° C
- System Accuracy: ±0.5° C (maximum over ambient operating range for 0-300°C RTD range)