BlueTrace - Compact Probe Turbidity Sensor

Easy Calibration
The BlueTrace can easily be optimally calibrated to the specific application. All you have to do is hold the sensor in the prepared samples and then perform a multi-point calibration. For this purpose, only the reference values have to be entered into the BlueBox controller or the corresponding software.

Adjustable Measuring Range
The sensitivity of the receiver can easily be changed either directly on the controllers of GO Systemelektronik, or with the help of the freely available PC program. Thus, the sensor can optimally be adjusted to the required measuring range.

Modbus Interface
The BlueTrace features a Modbus RTU interface. This means that the sensor can not only be connected to a GO Systemelektronik controller, but can also be integrated into third-party controllers or directly to a PLC. The necessary Modbus protocol is freely available.

Freely Available PC Program
With the freely available PC program you can adapt the stored standard calibration to your specific oil, allowing you to increase the measuring accuracy if necessary.

Measuring principle: 90° scattered light
Wavelength: 860 nm

Measuring range: selectable option
Measuring accuracy: 3 % FS
Detection limit: 0.1 ppm
Measuring interval: ≥ 1 s
Measuring range TSS: customer-specific factor based on turbidity
Measuring range temperature: 0-60 °C

Interface: Modbus [RTU]
Input voltage: 10 - 32 VDC
Power consumption: max 500 mW

Housing:
Material: selectable option
Dimensions (length without connection): length: 146.1 mm, diameter: 36 mm
Weight: 800 g
Temperature range: -5 °C ... +55 °C