- Home
- Companies
- FG Water Technologies
- Products
- FG Water - Model Rogen-L - Brackish ...
FG Water - Model Rogen-L -Brackish Water Reverse Osmosis System for Industrial Use
The Rogen Series BWRO system by Wuxi Fenigal Science and Technology Co. Ltd. is designed to efficiently produce water with low dissolved solids, drawing from sources like tap or well water. This system, with its high-efficiency reverse osmosis membranes, handles a capacity range of 200,000 to 900,000 gallons per day. Applications include semiconductor manufacturing, boiler feed, pharmaceuticals, municipal water reuse, food processing, and bottling. Its features include 8-inch TFC spiral wound membranes, a stainless steel multi-stage pump with a TEFC motor, and FRP membrane housings. The system is equipped with a PLC-based control panel, HMI screen, and liquid-filled pressure gauges, ensuring precise monitoring and control. Optional enhancements such as remote monitoring, feed water conductivity monitors, membrane cleaning skid, and containerized RO systems, allow for customized optimization based on specific operational requirements.
- 8”TFC spiral wound membranes
- Stainless steel multi-stage pump with TEFC motor FRP membrane housings
- 5 micron cartridge prefilter
- PLC based control panel
- Programmable time delay and set points
- HMI screen
- Motor starter
- Low pressure switch
- High pressure switch
- Liquid filled pressure gauges
- Permeate conductivity monitor
Permeate & concentrate flow meters
- Remote monitoring
- Feed water conductivity monitor
- Membrane cleaning skid
- Product tank level switch
- Feed pH monitor with sensor
- Feed ORP monitor with sensor
- Water and hour meters
- Chemical dosing systems
- Media prefiltration systems
- Ozonation and UV sterilization systems
- Water softeners
- Skid mounted with pre or post treatment
- Containerized RO systems
- Max feed water temperature 42 °C
- Equipment upgrade for TDS up to 5,000 ppm
- Hydrogen Sulfide must be removed
- Max Silica tolerance: 25 ppm @60% recovery
- Feed water pressure; 20 to 80 psj
- Hardness over 1 GPG requires water softener
- Feed water TDS. 0-2.000 ppm
- Operating pressure: 150 to 250 psi
- pH tolerance range: 3-11
- Max. Iron content: 005 ppm
- Turbidity should be removed
- Operate at higher TDS by lowenng recovery