- Home
- Equipment
Refine by
3t Analytik Environmental Equipment & Supplies
16 equipment items found
Manufactured by:3T Analytik GmbH & Co. KG based inNeuhausen ob Eck, GERMANY
Highly chemically compatible, the cleaning unit is the best choice for cleaning and coating of quartz chips. The cleaning unit is very practical for cleaning and coating of the quartz chips’ surface. When loaded, only the upper electrodes of the quartz are exposed to the outside so that the whole unit can be totally immersed in fluids, e.g. ultrasonic bath. The material of the cleaning ...
Manufactured by:3T Analytik GmbH & Co. KG based inNeuhausen ob Eck, GERMANY
The control unit (size 362 x 240 x 265 mm) is connected by USB to the computer monitoring the laboratory robot station.In order to integrate the PelTherm´s control, an application programming interface (API) is ...
Manufactured by:3T Analytik GmbH & Co. KG based inNeuhausen ob Eck, GERMANY
With only 30 µl internal volume, the flow cell is designed for easy access, fast sensor replacement and to maintain a good seal in its closed working condition. All surfaces in contact with liquid samples are made of high chemical resistant materials, e.g. ...
Manufactured by:3T Analytik GmbH & Co. KG based inNeuhausen ob Eck, GERMANY
qCell T series offers fully automated fluid control with high accuracy and repeatability. Flow rate can be precisely adjusted from 9 µl/min to 5600 ...
Manufactured by:3T Analytik GmbH & Co. KG based inNeuhausen ob Eck, GERMANY
qCell is the entry level sensor platform for the full range of QCM-D experiments. In comparison to the full-fledged sensor system qCell T, qCell has no Peltier system for thermal control and no automatic pump control. The software qGraph manages sensor data collecting and processing. Alterations in mass adsorptions, layer thickness and sample viscosity are obtained with high accuracy, controlled ...
Manufactured by:3T Analytik GmbH & Co. KG based inNeuhausen ob Eck, GERMANY
qCell series offers also optional fluid control with high accuracy and repeatability. Flow rate can be precisely adjusted from 9 µl/min to 5600 µl/min. The minimum flow rate reaches down to 9 µl/min and the 12 roller peristaltic pump provides high accuracy and repeatability even under low flow rate. Along with the minimum sample volume requirement of 80 µl, the fluid ...
Manufactured by:3T Analytik GmbH & Co. KG based inNeuhausen ob Eck, GERMANY
The qCell T is a highly advanced quartz crystal microbalance with damping/dissipation monitoring for gaining real time insights into molecular interactions, biofilms, liquid properties and even the analysis of blood.The QCM-D device qCell T offers unmatched stability, unique operational ease and accuracy in real-time ...
Manufactured by:3T Analytik GmbH & Co. KG based inNeuhausen ob Eck, GERMANY
qCell T eChem is the electrochemical version of the QCM-D instrument qCell T. The sensor platform is specifically adapted to combine the full range of electrochemical experiments with the specific insight of quartz crystal microbalance sensors. A potentiostat or galvanostat from Metrohm can be operated independently through its Nova™ control software, while qGraph qCell T software acquires ...
Manufactured by:3T Analytik GmbH & Co. KG based inNeuhausen ob Eck, GERMANY
The small size of the temperature unit makes it so easy for integration. Up to 6 temperature units can work independently at the same time. The build-in peltier element features precise temperature control, fast heating and cooling. 3T analytik provides also adaptor plates for deep well plates (DWP), micro-titer plates (MTP), lab tubes and ...
Manufactured by:3T Analytik GmbH & Co. KG based inNeuhausen ob Eck, GERMANY
Fully automated temperature control ranging from +4 °C to +80 °C powered by self-developped Peltier system of closed water ...
Manufactured by:3T Analytik GmbH & Co. KG based inNeuhausen ob Eck, GERMANY
The cooling unit (size 505 x 250 x 300 mm) connects the Peltier subsystems in daisy chain fashion, forming a closed loop liquid cooling circuit. An electrical pump transports excess heat to a radiator equipped with ventilators. Noise is 43 dB under ...
Manufactured by:3T Analytik GmbH & Co. KG based inNeuhausen ob Eck, GERMANY
The patented special design quartz chip ensures easy handling, high reliability and sensitivity with stress-free conditions on the quartz crystal. Each quartz sensor comes mounted on a thin polymer sensor sheet of precise dimensions. The sensor chip is labeled with a unique serial number and features an asymmetric shape with grooves which precisely fits into a flat cavity at the bottom of the ...
Manufactured by:3T Analytik GmbH & Co. KG based inNeuhausen ob Eck, GERMANY
The auto series is the latest upgrade of our QCM-D instruments allowing fully automated liquid handling with or without incubation feature. The automatization enables excellent stability and reproducibility for long term unattended measurements and makes it easy to design your experiments. Perform and supervise your experiments even from distance by using the simple scripting and remote control ...
Manufactured by:3T Analytik GmbH & Co. KG based inNeuhausen ob Eck, GERMANY
The new qCell T Q2 is a dual channel quartz crystal microbalance with dissipation/damping monitoring. Outperforming its predecessor, the QCM-D device qCell T, the second channel permits simultaneous measurement and control. The flow cells enables parallel synchronized flow operations and profiles. The software qGraph qCell T Q2 manages thermo and automatic fluidic control, sensor data collecting ...
Manufactured by:3T Analytik GmbH & Co. KG based inNeuhausen ob Eck, GERMANY
The easy control button (ECB) is the one button solution for qCell T series. It combines simplicity and ...
Manufactured by:3T Analytik GmbH & Co. KG based inNeuhausen ob Eck, GERMANY
The qCell μOpto is the latest innovation to our QCM-D instruments. It is designed for combining 3T’s advanced QCM-D technology with up to 600X simultaneous microscopic observation of the sensor surface. Combining QCM-D with real time microscopy allows the user to evaluate frequency and damping with respect to sample surface coverage and morphology. Use this combination to analyze the ...