- Home
- Equipment
Refine by
4b Environmental Equipment & Supplies
73 equipment items found
Manufactured by:4B Australia based inBrisbane, AUSTRALIA
The Bolt ‘N’ Go flight system is a revolutionary assembly method for drop forged chains. Link and flight assembly is made easy by using a standard bolt and mechanical lock nut with a high strength, heat treated hollow pin. There are no circlips and no intricate assembly is required. There is no welding of flights, no need to remove chain from the conveyor for installation, and no ...
Manufactured by:4B Australia based inBrisbane, AUSTRALIA
4B sprockets and trailers are manufactured from high grade heat treated steel to a minimum hardness of 57 HRC. Each piece is machined to size with appropriate bore and keyway specific to each customer’s application. Most sizes are in stock and ready to ship from 4B’s extensive ...
Manufactured by:4B Australia based inBrisbane, AUSTRALIA
4B elevator belting is of laminar construction, to give high impact resistance coupled with low stretch at working tension. The EP carcass comprises a woven textile construction having low stretch polyester fabric warp (along its length) and impact resistant polyamide fabric weft (across the width). The low stretch characteristics of the belt are achieved using the high strength textile fabric ...
Manufactured by:4B Australia based inBrisbane, AUSTRALIA
The Braime Clamp (BC) series of heavy duty belt splices securely fastens belting on larger bucket ...
Manufactured by:4B Group based inMorton, ILLINOIS (USA)
The JUMBO™ CC-S® is an ultra heavy duty version of the CC-S heavy duty elevator bucket, and part of 4B's High Efficiency™ bucket range. It is intended for the most severe applications, including port terminals, ethanol plants and highly abrasive materials. It offers the greatest capacity and thickest front lip, corners and walls available. The unique Iceberg® Edge front ...
Manufactured by:4B Group based inMorton, ILLINOIS (USA)
The Touchswitch is an electro-mechanical limit switch with no moving parts, which detects tracking and misalignment problems on bucket elevators and conveyors. When a belt misaligns or a pulley moves over and contacts the sensor, the built in solid-state electronic circuitry detects the lateral force of the belt or pulley and activates a voltage free solid state relay output. This output signal ...
Manufactured by:4B Group based inMorton, ILLINOIS (USA)
The M300 Slipswitch is an easy-to-use inductive proximity shaft speed monitoring device with an adjustable 0 - 30 second start-up delay, all housed in a 30 mm diameter moulded body. The self-contained unit has a single set point, which signals when the shaft speed has dropped by 20% of normal running speed. It is used for detecting dangerous slow down and underspeed conditions on conveyors, ...
Manufactured by:4B Group based inMorton, ILLINOIS (USA)
Reference 70™ (REF 70™) are ISO grade 5.8 elevator bolts with a concave head and four lugs on the underside to help prevent rotation when tightening. The REF 70™ bolt, when coupled with the special oval washer, is ideal for steel elevator buckets in heavy-duty industrial applications on larger diameter pulleys over 20 inches in diameter. Because of this domed area under the ...
Manufactured by:4B Group based inMorton, ILLINOIS (USA)
The fanged elevator bolt is characterized by two sharp teeth that are intended to penetrate the carcass of the elevator belt. Once the teeth penetrate the belt, they help keep the bolt from spinning which easily allows the lock nut to be ...
Manufactured by:4B Group based inMorton, ILLINOIS (USA)
Suitable for use in ATEX applications. -Recommended for use in equipment / installations where there is a risk of fire or ...
Manufactured by:4B Group based inMorton, ILLINOIS (USA)
4B Vise Splices are mechanical splices and fasteners for use on most PVC and rubber elevator belts. Each splice unit is made of three pieces. The outside plates have two different gripping areas. The ribbed gripping area is mounted towards the face of the belt. The opposite end has a series of both longitudinal and axial "teeth." The center plate is symmetrical and cannot be improperly ...
Manufactured by:4B Group based inMorton, ILLINOIS (USA)
Drop forged chain is either supplied with welded flights or with bolt-on flights (Bolt 'N' Go system). 4B drop forged chains have three main styles: standard, double and triple ...
Manufactured by:4B Group based inMorton, ILLINOIS (USA)
4B's STEEL WEB belt is a rubber elevator belt with a special steel cord core. The cords provide low elongation with high elasticity in the length, and cross rigidity in the width. The built-in elasticity allows running over slightly crowned pulleys which greatly improves belt tracking. The rigid weft cords act as a barrier to ripping and tearing which increases the holding ability for the bucket ...
Manufactured by:4B Group based inMorton, ILLINOIS (USA)
4B sprockets and trailing wheels are manufactured from high grade heat treated steel to a minimum hardness of 57 HRC. Each piece is machined to size with appropriate bore and keyway specific to each customer's application. ...
Manufactured by:4B Group based inMorton, ILLINOIS (USA)
Product Features: Easy to install or replace, cutting down the installation and maintenance costs. Eliminates the need for a bottom liner in the chain conveyor. Reduces conveyor noise. ...
Manufactured by:4B Group based inMorton, ILLINOIS (USA)
Plain or grooved, with or without flange, also available with replacement ...
Manufactured by:4B Group based inMorton, ILLINOIS (USA)
The WDB series bearing sensors are designed to screw directly into a bearing housing. Each sensor is fitted with a grease zerk to allow lubrication of the bearing without the need for removal of the sensor. The WDB8 series have a 1/4” BSPT thread. The WDB2 series have a 1/8” NPT thread. Three versions are available; an NTC thermistor or Pt100 RTD type for continuous temperature ...
Manufactured by:4B Group based inMorton, ILLINOIS (USA)
The WDB7 series is a lug style NTC thermistor or platinum RTD (PT100) type for continuous temperature monitoring. It is designed to bolt directly onto a bearing housing, motor, gearbox, or machine casing. The mounting hole is M8 which can be drilled out up to M10 diameter. The sensor can be connected to a PLC or to a hazard monitoring system, such as 4B’s T500 Hotbus Elite, Watchdog Super ...
Manufactured by:4B Group based inMorton, ILLINOIS (USA)
The Auto-Set series RF capacitance point level monitors are used for detecting high, intermediate, or low levels of liquids, powders and free flowing granular solids stored in tanks, bins, silos or other containers. ...
Manufactured by:4B Group based inMorton, ILLINOIS (USA)
The TACH3V5 Tacho is low cost electronic display which can be user programmed to indicate speed, distance or time intervals. The unit incorporates a 4 digit red LED display with programmable auto decimal point, in a DIN 96 x 48 enclosure (panel cut-out size: 92 x 44 mm). A relay output is provided for speed control ...