- Home
- Equipment
Refine by
Ag Environmental Equipment & Supplies
141 equipment items found
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
Digital RH/T module, in a 16 bar pressure tight TO housing. Digital humidity and temperature module in standard TO39 housing with glass sealed wires and a meshed steel filter; sensor element and calibration for low humidity levels ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
Gas flow sensor with flow range from 0 to 100 m/s and temperature range from -20 °C to +400 °C. For measuring flow rates using a symmetrical heater design and having an excellent sensitivity and reproducibility. ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
Thermal mass flow module with linearized digital / analog output. Fast and compact flow module, suitable for gas dosing systems, manifolds and analyzers. Easy to integrate with compact design, factory calibration and pins for HW address setting ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
Flexible strip-type biosensor for dip-in applications. Flexible strip-type biosensor, optimal for dip-in applications. Designed for the detection of one single analyte (glucose as standard). Ideal for applications that require in-line continuous measurement with high reliability. Note: Not for medical, diagnostics and use on humans. For evaluation use only. For more information contact IST AG. ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
Driver circuit board for a quick evalution of HISbasic series IR emitters. The Driver Circuit Board supports a quick evaluation of our IR emitters. Only a supply voltage and a pulse signal have to be applied to the 3-pin Molex PicoBlade 1.25 mm connector. For more information about its function, see our technical note. ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
Thermal infrared emitter in standard (3x3) mm² SMD package. HISsmd series emitters are small, powerful infrared radiation sources that meet the demands for reliable miniaturized gas sensors and offer a wide range of new application scenarios. The low energy consumption, the high efficiency and the small size allow the use in portable, battery-powered, and mobile applications. ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
Bubble detection of various liquids, incl. water, oil or coolants. Reliable switch indicating detection of bubbles from ca. 1mm diameter; suitable for various liquids incl. water, oil, coolants; continuous flowrate independant thermal principle ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
Driver circuit board for a quick evalution of HISpower series IR emitters. The Driver Circuit Board supports a quick evaluation of our IR emitters. Only a supply voltage and a pulse signal have to be applied to the 3-pin Molex PicoBlade 1.25 mm connector. For more information about its function, see our technical note. ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
Thermal mass flow module with linearized digital / analog output. Fast and compact flow module, suitable for gas dosing systems, manifolds and analysers; Practical Evaluation Kit with fluidic block adapter for direct tube atachment, M5-4 connectors for 4mm tubing included (exchangable) ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
Optimal for oil measurement applications, -40 °C to 190 °C, 5.0 x 3.81 x 0.4 / 1.2 mm,10 mm wires. Capacitive humidity sensor MK33-W mini with wires. Very good for high-end measuring applications and extreme and challenging environments. ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
OOL mass flow meter for flow monitoring and leakage detection of various liquids. Accurate, robust and ready-to-use: The compact and corrosion-resistant module is suitable for flow monitoring and leakage detection. An adjustable heating setting (per I2C command) allows to achieve leackage level (ml/h) flow detection with various liquids incl. lubrication and cooling liquids, gear and hydraulic ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
The IST AG 150 °C Pt Temperature Sensor Series offers excellent long-term stability and fast response time with low self-heating within a temperature range of -50 °C to +150 °C. The sensors are developed with an insulated enameled Cu-wire, which enables easy integrating into applications. The insulation is additionally removed at the end of the wire to enable easy welding or ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
Bondable platinum 1000 Ohm RTD component, temperature range -50° C to 150° C, taped on reel (sensor side up). IST AG's smallest temperature sensor with 0.1 x 0.2 mm (LxW) bondable contacts ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
The IST AG FS7.4W gas flow sensor has been developed for applications with temperatures up to 400 °C. The design of the FS7.4W is based on the FS7 design which offers a symmetrical heater that enhances sensitivity. The FS7.4W flow sensor is applicable in gas and offers excellent long-term stability. The small thermal mass of the FS7.4W sensor provides a fast response ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
Hermetic gas filter cell with glued CaF2 windows. Hermetic gas filter cells are gas-filled cylinders and are used to block out specific frequency bands of interfering gases in optical gas analysis. Additionally, the cells can be filled with reference gases of certain gas concentrations to be used for calibration of gas analysis systems. ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
Commodity conductivity sensor with four-electrode measurement. Measuring range from 1000 μS/cm to 100.000 mS/cm (typical cell constant of 0.66 cm-1). For various conductivity measurement applications. ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
The IST AG 750 °C Pt Temperature Sensor Series offers measurements in high temperatures and excellent long-term stability, fast response time and low self-heating within a wide temperature range of -200 °C to +750 °C. Due to the special materials the sensors are very vibration ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
Thermal infrared emitter in standard (3x3) mm² SMD package. HISsmd series emitters are small, powerful infrared radiation sources that meet the demands for reliable miniaturized gas sensors and offer a wide range of new application scenarios. The low energy consumption, the high efficiency and the small size allow the use in portable, battery-powered, and mobile applications. ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
Micro heater with small foot print for targeted heating of small spaces. with PTC positive temperature coefficient of resistance material. ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
The IST AG 850 °C Pt Temperature Sensor Series is the successor of the 750 °C Series offering temperature measurements from -200 °C to +850 °C. These RTDs are characterized by excellent long-term stability and fast response time with low self-heating even in harsh conditions and extreme temperatures. The Pt temperature sensors up to 850 °C are vibration and temperature shock ...