- Home
- Equipment
Refine by
Agf Environmental Equipment & Supplies
42 equipment items found
Manufactured by:FBGS Technologies GmbH based inJena, GERMANY
The All Grating Fiber (AGF®) is an optical fiber containing densely spaced low reflective ...
Manufactured by:AGF Manufacturing, Inc. based inMalvern, PENNSYLVANIA (USA)
The Commercial RiserPACK Model 8611 is a riser assembly for NFPA 13 fire sprinkler systems and designed to fit into a corner to minimize protruding and comply with ADA Standards. The Model 8000 includes a flow switch, TESTanDRAIN Model 1011A with included pressure relief valve and trim, Model 7600 3-way Universal Valve, and a Model 7500 Pressure Gauge. Available with a steel body in sizes 2"-6", ...
Manufactured by:AGF Manufacturing, Inc. based inMalvern, PENNSYLVANIA (USA)
AGF's RiserPACK Model 8511 commercial floor control assembly is pre-assembled with components to meet NFPA 13 requirements for fire sprinkler systems requiring pressure relief. Model 8511 includes a flow switch, TESTanDRAIN Model 2511A with pressure relief valve and trim, Model 7800 3-way universal valve, a Model 7500 pressure gauge, hose test connection, and an optional pressure reducing valve. ...
Manufactured by:AGF Manufacturing, Inc. based inMalvern, PENNSYLVANIA (USA)
AGF's Model 8011 13D RiserPACK is a pre-assembled residential riser that meets the requirements of NFPA 13D systems requiring pressure relief. This model includes a bronze body with a pre-assembled flow switch, Inspector'sTEST Model 3011A, Model 7500 pressure gauge, and a Model 7200 pressure relief valve. It's available in 1" - 2", K.30 - K11.2 (5/8 ELO) orifice sizes, and thread x thread, thread ...
Manufactured by:AGF Manufacturing, Inc. based inMalvern, PENNSYLVANIA (USA)
AGF's RiserPACK Model 8000 is a pre-assembled floor control assembly designed to meet NFPA 13D requirements for residential fire sprinkler systems. This model includes a flow switch, Inspector'sTEST Model 3011BV, and a Model 7500 pressure gauge. Available in sizes ranging 1" - 2", orifice sizes 3/8" (K2.8) - 5/8" ELO (K11.2), and thread x thread, thread x groove, or groove x groove ...
Manufactured by:AGF Manufacturing, Inc. based inMalvern, PENNSYLVANIA (USA)
AGF's Model 8011 13D RiserPACK is a pre-assembled residential riser that meets the requirements of NFPA 13D systems requiring pressure relief. This model includes a bronze body with a pre-assembled flow switch, Inspector'sTEST Model 3011A, Model 7500 pressure gauge, and a Model 7200 pressure relief valve. It's available in 1" - 2", K.30 - K11.2 (5/8 ELO) orifice sizes, and thread x thread, thread ...
Manufactured by:AGF Manufacturing, Inc. based inMalvern, PENNSYLVANIA (USA)
TESTanSAVE is a water containment system for fire sprinkler systems that recirculates the test water through the system during testing instead of discharging the test water to the outside. NFPA 25 requires regular testing for a sprinkler system to work effectively. By eliminating the introduction of freshly oxygenated water in the system, TESTanSAVE may also assist in slowing the rate of ...
Manufactured by:AGF Manufacturing, Inc. based inMalvern, PENNSYLVANIA (USA)
The AGF PURGEnVENT™ Model 7940 BLE is a Build America, Buy America Act (BABAA) compliant automatic air venting valve assembly designed to enhance the longevity and efficiency of wet pipe fire sprinkler systems. By continuously removing excess air, the 7940BLE helps reduce the risk of internal pipe corrosion, a common issue in metallic piping systems. ...
Manufactured by:AGF Manufacturing, Inc. based inMalvern, PENNSYLVANIA (USA)
The AGF Universal pressure relief kit allows pressure relief valve to be added on 1-1/4" - 6" RiserPACK models. Comes standard with 175 PSI. Other PSI available: 165, 185, 195, 205, 225, ...
Manufactured by:AGF Manufacturing, Inc. based inMalvern, PENNSYLVANIA (USA)
The COLLECTanDRAIN® Model 5450 Series of auxiliary drains feature a traditionally configured condensation collection assembly contained inside an insulated and heated cabinet. By incorporating a unique, self-maintaining design the Model 5450 offers more than just freeze protection. This feature prevents the auxiliary drain from filling beyond the safety level of the heated cabinet and ...
Manufactured by:AGF Manufacturing, Inc. based inMalvern, PENNSYLVANIA (USA)
Every benefit of the Model 5400 with AUTOMATED operation! The AGF COLLECTanDRAIN® Model 5500 is a fully automated auxiliary drain that features automatic supply and drain valves that operate according to draining provisions required by NFPA 25. The Model 5500 can be operated on-demand by the push of a button (locally or remotely) or by its hands-free, fully automatic mode which will operate ...
Manufactured by:AGF Manufacturing, Inc. based inMalvern, PENNSYLVANIA (USA)
If the drain below a Flood Eliminator fails, the dry valve will open, resulting in pressurized water entering the system flowing towards the break. When this high velocity pressurized flow reaches the internal mechanism of the Flood Eliminator, it will shut down the flow eliminating the damaging flooding that would result from a broken free flowing sprinkler line. The Model 5900FE can be easily ...
Manufactured by:AGF Manufacturing, Inc. based inMalvern, PENNSYLVANIA (USA)
Lightweight and compact, AGF's Model 1000 TESTanDRAIN is a 300 PSI rated single-handle ball valve that was specifically designed to provide both the test function and the express drain function required by NFPA 25 for a wet fire sprinkler system. In 1986, the Model 1000 revolutionized the industry and replaced the entire floor control loop assembly in one valve. The compact single-handle ball ...
Manufactured by:AGF Manufacturing, Inc. based inMalvern, PENNSYLVANIA (USA)
TESTanDRAIN Model 2511A with Alternative Handle Location, Pressure Relief Valve & Grooved Connections. Model 2511A is a 300 PSI rated single-handed ball valve designed to provide both the test and express drain functions for a wet fire sprinkler system. It saves time, space, and money by eliminating the numerous connections required by the traditional assembly loop. Model 2511A features a ...
Manufactured by:AGF Manufacturing, Inc. based inMalvern, PENNSYLVANIA (USA)
The DRAINanTEST® is a compact, single handle, iron body ball valve that is 300 PSI rated and features a tamper-resistant test orifice. It is designed for use as the 2" main drain and test valve for testing the alarm devices attached to the alarm check valve of wet pipe sprinkler systems. The Model 1500 can be ordered with a pressure relief valve as the Model 1511. The DRAINanTEST Model 1500 is ...
Manufactured by:AGF Manufacturing, Inc. based inMalvern, PENNSYLVANIA (USA)
Model 7000L temporarily locks closed for hydrostatic testing. The Model 7000L is a lockable pressure relief valve specifically designed to relieve excess pressure caused by pressure surges or temperature changes in all wet fire sprinkler systems. Model 7000L pressure relief valves comply with NFPA 13 requirements stipulating that a pressure relief valve must be installed on all wet systems and ...
Manufactured by:AGF Manufacturing, Inc. based inMalvern, PENNSYLVANIA (USA)
The CORRinSITE is a corrosion monitor manufactured from the same mild carbon steel as the system's piping, so its surface corrodes at the same rate as the pipe. When the monitor corrodes beyond its limit, moisture penetrates the sealed chamber and transforms the brilliant white sight glass to a fluorescent orange color indicating a corrosion problem and a need for further pipe inspection. The ...
Manufactured by:AGF Manufacturing, Inc. based inMalvern, PENNSYLVANIA (USA)
AGF's PURGEnVENT Model 7930 Automatic Air Vent with End Cap Assembly (ECA) includes a 1" ball valve, strainer, air vent, and purge assembly. The patented, one-piece isolation valve continuously vents air from the system with no leaks, meaning no need for drain lines or drip pans. Plus, the strainer and purge valve with hose thread allows for the rapid purging of air from the pipes as the system ...
Manufactured by:AGF Manufacturing, Inc. based inMalvern, PENNSYLVANIA (USA)
AGF's PURGEnVENT Model 7950 Automatic Inline Air Vent (ILV) features a separation chamber engineered to remove air as the fire protection system is filled with water to help prevent corrosion. The separation chamber and air scoop force a separation of air from the water as the system fills. The air is then released by the Model 7900AAV included in the assembly. AGF recommends installing Model ...
Manufactured by:AGF Manufacturing, Inc. based inMalvern, PENNSYLVANIA (USA)
The AGF RiserPACK Model 8511Z is a 2½” floor control assembly designed for NFPA 13 wet fire sprinkler systems. It features a hose test connection, TESTanDRAIN valve, flow switch, pressure gauge with a shutoff valve, and a Zurn ZW5004 Series Pressure Tru® Field Adjustable Pressure Reducing Floor Control Valve. The 8511Z manifold was designed specifically for floor control ...