- Home
- Equipment
Refine by
Applications
- Soil sampling and drilling solutions for agriculture industry
- Soil sampling and drilling solutions for pest control industry
- Soil sampling and drilling solutions for environmental industry
- Stack Emission Sampling for Emission Dust Sampling Options
- Stack Emission Sampling for Heavy Metal Sampling System
- Stack Emission Sampling for Mercury Sampling System
- Stack Emission Sampling for Hydrochloride Acid Chimney Sampling
- Stack Emission Sampling for Dioxin Sampling
- Soil sampling and drilling solutions for golf and turf industry
Ams Environmental Equipment & Supplies
330 equipment items found
Showcase
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The Field Vane Shear Tester Kit is used to measure in-situ undrained shear strength in clays. It is primarily intended for use in trenches and excavations at depths up to 3 m. This can be extended with additional optional extensions. The range of the instrument is from 0 to 260 kPa when three different size vanes are used. Accuracy should be within 10% of the reading. The measuring part of the ...
Showcase
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The 2" X 12" Multi-Stage Soil Core Sampler Complete collects an approximate 2" diameter undisturbed core sample down to 48" deep when optional extension sections are attached. This sampler has an outside diameter of 2-3/8" and accepts a 2" liner. The cap, sampler base, extension section, and auger tip are constructed of 300 series stainless steel (SST). The core tip is constructed of 400 series ...
Premium
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
AMS Regular Augers are designed for use in most soil types. The AMS regular soil auger is commonly used for obtaining disturbed soil samples at or near the surface and for boring to depths where soil samples may be obtained with a separate soil sampler or soil core sampler. The bits of the regular soil auger are open to allow entry of small soil clumps and relatively small rocks and ...
Premium
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
AMS Regular Augers are designed for use in most soil types. The AMS regular soil auger is commonly used for obtaining disturbed soil samples at or near the surface and for boring to depths where soil samples may be obtained with a separate soil sampler or soil core sampler. The bits of the regular soil auger are open to allow entry of small soil clumps and relatively small rocks and ...
Premium
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
Heavy-duty steel sharpshooter opens a deep, narrow hole, even in hard, rocky soil. The long rubber-coated handle reduces recoil from rock strikes. Blade is 18"L x 5 1/4"W at top and tapers to 4 1/4" at bottom. The handle is 29" ...
Premium
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
Use the AMS Split Soil Core Samplers to easily extract relatively undisturbed soil core samples. The split soil core sampler has a vertically split cylinder. You can use the split soil core sampler without a liner to collect relatively undisturbed soil cores for immediate field examination and testing. Or, it can be used with a liner for collection of relatively undisturbed, sealed soil core ...
Premium
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The Russian Peat Borer (7.5 cm x 60cm model shown) is a side filling chambered-type sampler. This discrete point sampler enables one to drive the sampler to any point in the sediment profile in the closed (empty) position. Once the target depth is reached, the “T” handle is turned clockwise to initiate the sampling while the pivotal cover plate supports the cutting action of the ...
Premium
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The AMS Dutch Auger allows you to easily collect disturbed soil samples in heavily rooted areas. Hand forged from high-carbon steel and honed to a fine cutting edge, this auger will cut through highly fibrous and heavily rooted soils. It is excellent for use in, forests, vineyards and orchards. The unique open design of the dutch auger also allows for easier removal of hard or wet ...
Premium
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The unique design of the Open-Face Auger allows for quicker penetration into combination soils. Its advanced cutting head helps the Auger pull itself into the ground with little effort and yields quicker soil penetration. The cylinder is made of thick, 10 gauge, high-carbon steel. The special cutting head and thick body make the Open-Face Auger especially useful in tough combination soils – ...
Premium
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
Scoops may be used for sampling or compositing. The AMS range of 5 sizes has been the industry standard for this purpose for well over a decade. They feature passivated 300 series stainless steel construction, and they are available with or without a rubber handle. ...
Premium
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
Soil gas sampling and monitoring with direct push methods are commonly used with soil gas surveys for the investigation of volatile organic compounds. AMS offers soil gas sampling systems with several options to allow sampling for a wide variety of regulatory and standard ...
Premium
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The AMS Planer Auger removes loose soil and other materials from the bottom of an already augered hole. This auger is fitted with a cutting blade on the underside of the auger cylinder. The flat, slotted design of the planer auger's head allows for the auger to remove loose material from the bottom of a borehole in preparation for collection of a soil core sample. The AMS Planer Auger is made ...
Premium
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
Scoops may be used for sampling or compositing. The AMS range of 5 sizes has been the industry standard for this purpose for well over a decade. They feature passivated 300 series stainless steel construction, and they are available with or without a rubber handle. ...
Premium
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
AMS Water Level Meters provide reliable and accurate measurements of groundwater levels. Water level readings are taken at the top of the casing with accuracy to within 1/100 of a foot (3mm). They utilize a durable polypropylene storage reel with a rugged solid aluminum frame. Their highly accurate Polyethylene-coated steel tape is available in either standard/English or metric unit increments. ...
Premium
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The NEW AMS Replaceable Tip Sand/Loose Sediment Soil Probe is ideal for obtaining unconsolidated soil samples in a 1” x 24” poly ...
Premium
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
This 3' tile probe extension is specifically designed for use with our 7/16" extendable tile ...
Premium
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
Professional Series Regular Augers feature the trusted AMS 3/4" threaded connection and have thicker cutting teeth with stronger welds and extra tungsten carbide hard surfacing. Professional augers are also reinforced with extra gussets welded at both the top and bottom of the bail. The gussets help prevent the bail from bending or twisting when augering into hard or rocky soils, or when the ...
Premium
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
One-Piece Mud Augers are powder-coated (black) for rust resistance and come equipped with an 16" rubber-gripped cross handle. This lightweight (4 to 5 lbs) one-piece wet soil auger is an inexpensive alternative to our mud auger, extension, and cross handle system for anyone needing to dig holes less than 4'. The complete mud auger set up is 53" in length. It has carbon steel auger bits that are ...
Premium
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
Scoops may be used for sampling or compositing. The AMS range of 5 sizes has been the industry standard for this purpose for well over a decade. They feature passivated 300 series stainless steel construction, and they are available with or without a rubber handle. ...
Premium
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
2" Multi-Stage Soil Core Sampler Cap, 3/4" ...