- Home
- Equipment
Refine by
Ankersmid Environmental Equipment & Supplies
28 equipment items found
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
Ankersmid sample tubes are selected according to specific applications. Influencing process parameter are the gas composition, water vapure saturation, dust loading, process temperature, pressure and the gas ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
The new range of AMP pumps are equipped with the patented stress-optimized structured diaphragm, resulting in a durable product of high pneumatic performance and compact size. Special valves ensure minimum resistance to flow. The pumps can be operated by either standard 230VAC, or for ex-proof applications, with a motor with various options on voltages and ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
This electrically heated sample lines series AHL are designed for connecting to all Ankersmid sample elements. The heated line ensures that the gas components in the sample stream remain above their dew point and thereby eliminates the risk of condensation. This is a safe way to transport the sample to a heated analyzer or the special Ankersmid coolers. The electrically heated sample lines series ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
The compressor cooler series ACC 4xx offers precision, safety and long-term stability for extractive analytics. The very low gas dissolution rate is attained owing to the new cooler technology (Patents applied). Both the permanent separation of the condensate from the gas phase, as well as the shorter contact time of the gas in the system, plays important roles in reducing gas dissolution ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
The compressor cooler series ACC 1xx offers precision, safety and long-term stability for extractive analytics. The very low gas dissolution rate is attained owing to the new cooler technology (Patents applied). Both the permanent separation of the condensate from the gas phase, as well as the shorter contact time of the gas in the system, plays important roles in reducing gas dissolution ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
This unique microprocessor controlled Peltier Cooler APC 1403 has been designed with a powerful dew point stabiliser. The dew point is set at 4°C but can be changed at any value between 1 and 15°C. The condensate that is formed should be removed by a peristaltic pump, automatic drain or collection vessel. The heat exchanger is demountable and is made of PTFE/PFA. ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
The ASR25 is a peristaltic pump designed for continuous operation. Driven by a synchronous motor a system of pulleys pushes the condensate through a special tube with a very long runtime. These pulleys are pressed by 4 springs on the peristaltic tube. A running speed of 5 rpm guarantees that the two PVDF hose pulleys and the Novoprene® hose provide good mechanical and chemical resistance with ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
Due to its modular design and various options, the Ankersmid heated sample probe filters cover the widest range of applications. In the heated filter body a filter element of 150mm length, suitable for most applications up to 1g dust/m3, is integrated. A 180mm long filter with an outer diameter of 40mm and made of stainless steel can be optionally used for applications up to 4g dust/m3; with the ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
The portable system is suitable for variable, discontinuous and continuous operation. The components built into the system can be used for standard applications. For special requirements please ask us for other ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
The portable system is suitable for variable, discontinuous and continuous operation. The components built into the system can be used for standard applications. For special requirements please ask us for other solutions. The heated sample line is to be mounted at the gas measuring inlet terminal inside the portable case. ...
Manufactured by:Envira based inLlanera (ASTURIAS), SPAIN
The probe ASP 320 has been designed for the continuous sampling of gas in denitrification processes (DeNOx) where ammonium compounds (NH3) are added to reduce the content of nitrogen ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
The probe type ASP 320 is based on the standard Ankersmid sample probe. Due to its modular and innovative design the Ankersmid heated sample probe cover also meet the special requirements of above mentioned ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
Due to various acid dew points at various applications the probe is heated up to 180°C. A filter element of 150mm is integrated, suitable for most applications up to 1g dust/m3. A significant advantage is that this filter is replaceable without dismounting the probe. with the filter element of 150mm length this probe is suitable for most applications up to 1g dust/m3; with the blow-back ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
The electronic temperature controller is mounted in a wall-mounting housing. The temperature sensor input is developed for multiple sensor inputs (standard PT100). The desired operating temperature can be set by using the respective control keys. The actual value is indicated via 4-digit display and the controller function via LED. ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
The Ankersmid digital gas conditioning system is a compact, • low-maintenance, self-monitoring and completely equipped units is suitable for variable and continuous operation in most ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
Due to its modular design and various options, the Ankersmid heated sample probe filters cover the widest range of applications. With a choice of different lengths of heated filter body, a filter element of 150mm length, suitable for most applications up to 1g dust/m3 can be integrated. 180mm filters with a larger filter surface are used for applications up to 4g dust/m3; with the blow- back ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
Our robust manifolds are availeble in all possible sizes connections and materials. 2 Vaive Manifold hange to Flange design for separate mounting, connecting system impulse lines and transmitters, having simple two valve configuration which allows for easy block, bleed and calibration of static pressure transmitter or gauge ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
The heated sample lines are manufactured according to the clients specification and completely confectioned in the factory at a fixed length. The heating element used in this type of heated line is an autoregulated ribbon. The heated line is secured closely to the sample carrier tube, thus eliminating the occurrence of cold zones or spots in the heated line, and therefore also eliminating the ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
Due to various acid dew points at various applications the probe is heated up to 180°C. A filter element of 150mm is integrated, suitable for most applications up to 1g dust/m3. A significant advantage is that this filter is replaceable without dismounting the probe and without using any tools. Due to its modular design and various options, the heated sample probe covers the widest range of ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
Gas flows into the filter body by one of two inlets in the standard filter head. The gas flows out of holes in the lower part of the filter and then passes through the adsorption material to exit again at the head of the filter ...