- Home
- Equipment
Refine by
Acker Environmental Equipment & Supplies
99 equipment items found
Manufactured by:Acker Drill Company Inc based inSouth Abington Twp, PENNSYLVANIA (USA)
Still the quintessential Helicopter Fly-In Rig, the BUSHMASTER is a modular, all hydraulic core drill rig designed for quick breakdown and setup in the most remote of ...
Manufactured by:Acker Drill Company Inc based inSouth Abington Twp, PENNSYLVANIA (USA)
Even 50 years after its inception, the rugged ACE is still the best lightweight and portable shallow exploration drill unit. With a range of job tested features for dependable performance, many units have been running strong and in service for close to 50 years. At Acker, we call that ...
Manufactured by:Acker Drill Company Inc based inSouth Abington Twp, PENNSYLVANIA (USA)
When you look in the dictionary under the word "value", you may very well see a picture of the AD-II. Originally rolled out of our plant in 1969, the AD-II is still a very popular choice of contractors worldwide as a rugged, mechanical rotary ...
Manufactured by:Acker Drill Company Inc based inSouth Abington Twp, PENNSYLVANIA (USA)
The KODIAK is Acker's newest economical, modular drill unit. The KODIAK offers limited access capability with the ability to drill under 8 ft. [2.43 m] clearance. Not in low clearance? The KODIAK includes the option of 77" [1.95] of stroke. And with the option of (3) removable drill heads and a Cathead, you can efficiently auger, core, and SPT in the most restricted ...
Manufactured by:Acker Drill Company Inc based inSouth Abington Twp, PENNSYLVANIA (USA)
The Little John is an all-hydraulic core drill specifically designed for use in tight spaces. Its modular three-piece design and special mounting features make it popular for use inside of dam galleries. ...
Manufactured by:Acker Drill Company Inc based inSouth Abington Twp, PENNSYLVANIA (USA)
A versatile team for operation in remote areas. Both the hoist and aluminum derrick disassemble for carrying into difficult job sites. Manufactured by Acker Drill Company for over 60 ...
Manufactured by:Acker Drill Company Inc based inSouth Abington Twp, PENNSYLVANIA (USA)
The MP-HD is a heavy-duty, all-hydraulic drill rig specifically designed for deep hole coring and RC drilling ...
Manufactured by:Acker Drill Company Inc based inSouth Abington Twp, PENNSYLVANIA (USA)
An unequivocal favorite of State Agencies and contractors far and wide, no other payment test core drill matches the performance, build quality and reliability of the ...
Manufactured by:Acker Drill Company Inc based inSouth Abington Twp, PENNSYLVANIA (USA)
The R.A.D. (Restricted Access Drill) is a all-hydraulic drill specifically designed for easy access in restricted spaces. It is capable of fitting through a standard 36” doorway and under 8’ ceilings with a travel position of 39-1/2” wide and 33-1/2” with tracks retracted. It includes a three section mast designed for 11 ft., 7 ft., and 3 ft. head stroke. ...
Manufactured by:Acker Drill Company Inc based inSouth Abington Twp, PENNSYLVANIA (USA)
As the heir to our popular SOIL-XLS drill rig, the Acker REBEL XL continues its legacy with added features and a new mid-sized track system. Like all Acker rigs, it shines with its low-end torque and high-end speed, excellent production, and low cost to own. And with features like the Mast Dump and Engine Tilt, contractors can drill efficiently on sloped terrain where other drills dare ...
Manufactured by:Acker Drill Company Inc based inSouth Abington Twp, PENNSYLVANIA (USA)
Now working on four Continents, the RENEGADE has built a reputation Worldwide as a versatile, high-performance drill rig with top-notch American workmanship quality. And as the preeminent all-hydraulic multipurpose drill, the RENEGADE separates itself from the pack, just like a true American ...
Manufactured by:Acker Drill Company Inc based inSouth Abington Twp, PENNSYLVANIA (USA)
The SOIL-MAX has been field proven by contractors all over the World for over 25 years. With 11,500 ft. lbs. [15,591 Nmj of "working torque", it was originally designed for large diameter auger drilling requirements, an area it stays true to today. And in addition to BIG TORQUE, the SOIL-MAX has BIG VERSATILITY. It handles augering, soil sampling and coring operations quickly, efficiently and ...
Manufactured by:Acker Drill Company Inc based inSouth Abington Twp, PENNSYLVANIA (USA)
Throughout the last decade, the versatile Acker SOIL-SCOUT has become a favorite of many drilling contractors throughout the country...and for good reason. At only 47-1/2" [1.21 m] wide, it is capable of traveling through areas where most track rigs aren't capable of going, such as between houses and through tight entrance ways. And with clearance of less than 8 feet [2.44 m], it is not uncommon ...
Manufactured by:Acker Drill Company Inc based inSouth Abington Twp, PENNSYLVANIA (USA)
The DCDMA "M" Design core barrels and bits are used when coring soft, friable or broken formations. They are available with conventional waterways or bottom discharge design. Bottom discharge bits have internal water ports that permit the water to bypass the core and prevent erosion of soft materials. Grit facing strips are available for coring in very abrasive formations and to avoid excess wear ...
Manufactured by:Acker Drill Company Inc based inSouth Abington Twp, PENNSYLVANIA (USA)
These bits are for use with DCDMA standardized large diameter design double tube core barrels for recovery of large diameter cores in rock-like material. They are available with internal waterways or with bottom discharge ports that allow the water to bypass the core. They are available with all the options of the Acker ...
Manufactured by:Acker Drill Company Inc based inSouth Abington Twp, PENNSYLVANIA (USA)
Diamond bits are stocked in standard sizes. The chart shows basic part numbers and diamond carat size. Four diamond grades are available as well as special features such as extra hard matrix, tungsten hard facing, and reinforced waterways. Many other competitive features are available on request. Consult Acker price lists for details...Please specify step-type or conventional ...
Manufactured by:Acker Drill Company Inc based inSouth Abington Twp, PENNSYLVANIA (USA)
Acker surface set diamond casing shoes and bits ate available for the approved OCOMA flush joint "W" design casing. "W" casing bits and shores ate only available with box thread connections, Casing bits and shoes have a standard pin thread connection. Box threads are available on ...
Manufactured by:Acker Drill Company Inc based inSouth Abington Twp, PENNSYLVANIA (USA)
Cutter heads for Hollow Stem Augers are designed with replaceable-type carbide inserts. The cutter head design allows the center plug with the pilot bit to be positioned slightly ahead of the cutter head. A hollow bore drill head allows the center plug to be withdrawn to the surface when the desired depth of the hole is reached. Center stem rods are used to connect the center plug to the center ...
Manufactured by:Acker Drill Company Inc based inSouth Abington Twp, PENNSYLVANIA (USA)
This drill head or "Cutter Head" is designed for use on Conveyor Flight type augers. The head is constructed of high quality steet and designed for use with hard faced or carbide inset type finger cutters. Carbide insert fingers are commonly used to drill reasonably hard rock and shales. The cutter head is held on the flight auger by means of a drive clip pin and rotated by the standard shank and ...
Manufactured by:Acker Drill Company Inc based inSouth Abington Twp, PENNSYLVANIA (USA)
Steel drive pins are used to secure connecting ends of conveyor flight augers. The drive pin is driven into place with a hammer and removed by the pointed end of the hammer. Since driving will gradually weaken the clip, replacements should always be considered when ordering. Sizes will depend upon augers in ...