- Home
- Equipment
Refine by
Applications
- Air Quality Monitors for Transportation Microenvironmentsring
- Air Quality Monitors for Mobile Monitoring
- Air Quality Monitors for Wildfires, Biomass & Tobacco
- Air Quality Monitors for Long-Term Stationary Monitoring
- Air Quality Monitors for Vertical Profiling & UAVs
- Air Quality Monitors for Health Effects & Personal Exposure
- Air Quality Monitors for Community Monitoring
- Air Quality Monitors for Indoor Air Quality
Aethlabs Environmental Equipment & Supplies
37 equipment items found
Manufactured by:Aethlabs based inSan Francisco, CALIFORNIA (USA)
A small, portable, passive nafion / desiccant aerosol dryer. Desiccant life of 72 liters before recharge or ...
Manufactured by:Aethlabs based inSan Francisco, CALIFORNIA (USA)
The Flow Calibration Kit comes with all of the components necessary to reliably calibrate the microAeth® AE51. This kit includes our calibration software which features automatic and manual modes, a 0.01-20 lpm flowmeter and all necessary tubing, connectors, and cables. The automatic calibration option is only compatible with the included flowmeter. ...
Manufactured by:Aethlabs based inSan Francisco, CALIFORNIA (USA)
The microAeth MA Series Flow Calibration Kit comes with all of the components necessary to reliably perform a flow calibration of the microAeth MA Series instruments. This kit includes a custom designed external mass flowmeter and all necessary tubing, connectors, and cables to perform the simple and fully automated flow calibration. The only way to perform a flow calibration on the MA Series ...
Manufactured by:Aethlabs based inSan Francisco, CALIFORNIA (USA)
The outlet muffler greatly reduces audible noise. It is useful in applications where audible pump noise can be disruptive. The muffler attaches directly to the outlet port of the microAeth AE51. The muffler is only applicable for use with the microAeth ...
Manufactured by:Aethlabs based inSan Francisco, CALIFORNIA (USA)
The 1/8" Compression Fitting Connector joins a 1/8" outside diameter (OD) metal tube on one side with a 10-32 threaded fitting on the other - which fits into the inlet or outlet port on the device. This fitting is made of 316 Stainless ...
Manufactured by:Aethlabs based inSan Francisco, CALIFORNIA (USA)
This cable allows the microAeth MA Series instruments to send and receive 3.3v TTL serial data from the 4-pin serial port to and from other devices. This cable is not included with the ...
Manufactured by:Aethlabs based inSan Francisco, CALIFORNIA (USA)
This stainless steel kit allows for mounting an MA350 directly to a 2-12" diameter pole by attaching it to the outdoor-rated ...
Manufactured by:Aethlabs based inSan Francisco, CALIFORNIA (USA)
The barb fitting swivel connector allows the attachment of flexible hose that can swivel independently of the microAeth. The barb fitting swivel connector joins a 1/8" inside diameter (ID) hose on one side with a 10-32 threaded fitting on the other - which fits into the inlet of outlet port on the ...
Manufactured by:Aethlabs based inSan Francisco, CALIFORNIA (USA)
The lapel clip allows the sampling hose to be securely situated near the target site of measurement - near the face, for ...
Manufactured by:Aethlabs based inSan Francisco, CALIFORNIA (USA)
This is the replacement Pick N Pluck foam for the above protective carrying case for microAeth with exterior dimensions of 17" x 13.25", ...
Manufactured by:Aethlabs based inSan Francisco, CALIFORNIA (USA)
This is the replacement Pick N Pluck foam for the above protective carrying case for microAeth with exterior dimensions of 20" x 14.75", ...
Manufactured by:Aethlabs based inSan Francisco, CALIFORNIA (USA)
The microCyclone 50 is a miniature PM2.5 size-selective inlet for the microAeth. This sharp-cut cyclone has a size cut of 2.5 micron at 50 ml/min and 1.6 at 100 ...
Manufactured by:Aethlabs based inSan Francisco, CALIFORNIA (USA)
The microCyclone 170 is a miniature PM2.5 size-selective inlet for the microAeth. This sharp-cut cyclone has a size cut of 2.5 micron at 170 ml/min and 2.9 at 150 ...
Manufactured by:Aethlabs based inSan Francisco, CALIFORNIA (USA)
The filter tape cartridges are custom designed for use in the microAeth® MA200. The filter tape cartridges have PTFE filter material for collecting a 3mm sample spot. Cartridges each contain 17 sampling ...
Manufactured by:Aethlabs based inSan Francisco, CALIFORNIA (USA)
The Inlet Protection Kit for the microAeth is designed to help protect the instrument and data from moderate water and bug intrusion and in-line condensation throughout the sampling train. This kit includes a custom designed protection cone, water/bug trap, all necessary tubing and connectors, along with a custom mount and cable ties for ...
Manufactured by:Aethlabs based inSan Francisco, CALIFORNIA (USA)
The microAeth AL80 is a real-time Black Carbon aerosol monitor. This instrument comes in an outdoor rated enclosure with insulation, sampling inlet protection, and sun shield. It is lightweight and small enough to be quickly installed for measuring aerosol Black Carbon concentration in real-time without intervention for up to approximately 1-2 weeks. The microAeth incorporates the same ...
Manufactured by:Aethlabs based inSan Francisco, CALIFORNIA (USA)
The adapter is intended for use with the AethLabs USB power/data cable, comes with the appropriate region-specific plug, and both powers operation of the unit and charges the battery. We offer the following AC plug options: USA (Type A), Europe (Type C), UK (Type G), China, and Australia (Type ...
Manufactured by:Aethlabs based inSan Francisco, CALIFORNIA (USA)
This cable allows the microAeth MA Series instruments to send and receive serial data from the 4-pin serial port to the USB port of a computer. This cable is also used to upgrade the firmware of microAeth MA Series instruments. This cable is not included with the ...
Manufactured by:Aethlabs based inSan Francisco, CALIFORNIA (USA)
This cable converts the microAeth MA350 circular connector port to a DC barrel jack port and a 4-pin serial port. This cable is included with the ...
Manufactured by:Aethlabs based inSan Francisco, CALIFORNIA (USA)
This cable allows the microAeth MA350 to send and receive 3.3v TTL serial data to and from other devices. This cable also allows the MA350 to be powered from an external source. This cable is not included with the ...