- Home
- Equipment
Refine by
Amot Environmental Equipment & Supplies
10 equipment items found
Manufactured by:Amot based inHouston, TEXAS (USA)
The ASX-200 12VDC/50Amp Flameproof Alternator is an externally excited alternator designed for use in belt driven, diesel engine applications. The ASX-200 is tri-certified for use in hazardous areas classified as ATEX/IECEx Zones 1 or 2, NEC 500 Division 2 and NEC 505 Zone 2. It is suitable for ambient temperature range -30°C to ...
Manufactured by:Amot based inHouston, TEXAS (USA)
The AMOT XT range uses the best available technology to shut down a runaway diesel by positively choking off engine intake air. The valve operates as part of a fully automatic overspeed shutdown system when paired with our Revguard 2 speed switch and activation kit. Actuation of the XT solenoid rapidly closes the valve’s butterfly disc which shuts off intake air flow into the engine. The XT ...
Manufactured by:Amot based inHouston, TEXAS (USA)
AMOT Model 4110 Overspeed Sensing Valve provides overspeed protection for engines and rotating equipment. The valve uses a precision flyweight speed sensor to vent a pneumatic or hydraulic signal (via a built-in two-way valve) at a pre-set ...
Manufactured by:Amot based inHouston, TEXAS (USA)
The 4164 Hydro-Mechanical Diesel Fuel Shut Off Valve is designed to cut the fuel supply to an engine to protect it from damage if its running parameters are exceeded. Two versions of the valve are available. One cuts the fuel supply completely, stopping the engine. The other has an adjustable needle valve that allows sufficient fuel flow to run the engine at an adjustable idle ...
Manufactured by:Amot based inHouston, TEXAS (USA)
Chalwyn stainless steel spark arrestors help mitigate the risk of fire from the ignition of flammable materials caused by spark emission from diesel engine exhaust. They are designed to meet the requirements of the latest generations of low emission diesel engines (NRMM stage III A / B, stage IV and V; equivalent US Tier 3 & 4 : Euro 5 and 6 (other harmonised standards) and engines fitted ...
Manufactured by:Amot based inHouston, TEXAS (USA)
AMOT Model 2800 fuel rack actuator is a safety shutdown device which senses oil pressure or other control pressure. This device is typically connected to an engine fuel rack governor or fuel pump stop lever and should a loss or drop in oil pressure occur below the set point, it will trip ...
Manufactured by:Amot based inHouston, TEXAS (USA)
AMOT Model G 3-way rotary control valves provide a high degree of accuracy for precise temperature control in both mixing and diverting applications. If you experience long warm-up times, excessive white smoke coming from the exhaust, or difficulty regulating fluid temperatures at idle, replace your thermostatic valve with an externally-actuated AMOT Model G without the need for piping ...
Manufactured by:Amot based inHouston, TEXAS (USA)
The 1 1/2" Model BH valve is an internally sensing, 3-way thermostatic control valve with a Cast Iron body. It provides accurate and reliable temperature regulation in a variety of industrial applications where fluids are mixed or diverted, depending on their ...
Manufactured by:Amot based inHouston, TEXAS (USA)
The 2470 is a two-way temperature regulating valve with remote sensing to modulate or shut off flow resulting from temperature changes. It can be used to sense the regulating medium or another fluid. The 2470 valve uses a highly reliable expanding wax element encased in a bronze retaining cup, which produces exceptional valve travel per unit of temperature change. Where additional element ...
Manufactured by:Amot based inHouston, TEXAS (USA)
The AMOT combined temperature and pressure control valve is used in applications where both temperature and pressure control are required simultaneously. It combines temperature control, pressure regulating and pressure relief into a single manifold valve, thereby reducing installation costs and simplifying material planning. The valve is designed to be mounted directly on the oil tank to ...