- Home
- Equipment
Refine by
Bestech Environmental Equipment & Supplies
23 equipment items found
Manufactured by:BESTechnologies, Inc. based inSarasota, FLORIDA (USA)
This weather resistant Dispenser is installed near a lift station and dispenses our Part # 8303, # 8303 or # 8303 BioFeed LS/TP (depending on the severity of the ...
Manufactured by:BESTechnologies, Inc. based inSarasota, FLORIDA (USA)
(2-roll pack) Enables a service technician to determine the pH of wastewater being treated and whether bioremediation will likely be ...
Manufactured by:BESTechnologies, Inc. based inSarasota, FLORIDA (USA)
Makes feeding the dispense tube from Part #8232 Bucket-Top Autodose Dispenser or Part #8241 Wall-Mount Dispenser to be easily and surely fed through the p-trap and into the drain line ...
Manufactured by:BESTechnologies, Inc. based inSarasota, FLORIDA (USA)
This Dispenser attaches to a wall or other vertical surface and draws its Dosing Material from a 5-gallon bucket with cover (bucket and cover not included) and dispenses our Part # 8301 BESTech BioFeed ...
Manufactured by:Bestech Australia Pty. Ltd. based inDingley, AUSTRALIA
The Micro-Epsilon IMS5420 is a state-of-the-art white light interferometer designed for the non-contact thickness measurement of monocrystalline silicon wafers. It is a compact system which is suitable for measurement applications in area where space is restricted or limited. Featuring a broadband superluminescent diode (SLED) with a 1,100 nm wavelength range, it is adept at measuring undoped, ...
Manufactured by:Bestech Australia Pty. Ltd. based inDingley, AUSTRALIA
The BDF2000 is a compact educational fluid dynamics bench designed for practical learning in engineering laboratory. This self-contained unit allows students to investigate pressure losses in pipes, valves, and fittings, and compare flow rate measurement techniques using different ...
Manufactured by:Bestech Australia Pty. Ltd. based inDingley, AUSTRALIA
The H102 is a heat exchanger service unit that is used to provide services to different types of heat exchangers. It is a bench-mounted panel with an integral electrical console designed for educational institutes that enables students to perform experiments on 11 types of exchangers such as a concentric tube, shell and tube, plate heat exchangers. The unit is equipped with a hot water system, ...
Manufactured by:Bestech Australia Pty. Ltd. based inDingley, AUSTRALIA
The wireSENSOR WDS-MP/MPW miniature draw wire sensors are designed for mobile applications in the industry. They are ideal when used to measure medium distance in a restricted / limited area. The MPW series is a waterproof version of the WDS-MP for measuring displacement in harsh ambient ...
Manufactured by:Bestech Australia Pty. Ltd. based inDingley, AUSTRALIA
The distinct advantage of using an LVDT displacement transducer is that the moving core does not make contact with other electrical components of the assembly as so offers high reliability and long life. LVDTs are ideal for a wide range of applications where minimum mechanical friction is required. ...
Manufactured by:Bestech Australia Pty. Ltd. based inDingley, AUSTRALIA
The A660 Air Conditioning Laboratory Unit is teaching equipment used for the demonstration of processes used in heating, cooling, humidification, de-humidification of an airstream. It helps teachers to describe fundamental laws related to air conditioning and refrigeration. The training equipment comes with full data acquisition software and hardware system. It enables students to measure air ...
Manufactured by:BESTechnologies, Inc. based inSarasota, FLORIDA (USA)
Biotizer dispenser kit includes the dispenser (under perpetual lease), one (1) bag of DrainMainTainR product and installation hardware (not shown) - everything you need (except a drill motor and screwdriver bit) to install the biotizer and service it for one ...
Manufactured by:BESTechnologies, Inc. based inSarasota, FLORIDA (USA)
This Dispenser sets on top of a 5-gallon bucket (bucket is not included) and dispenses our Part #8301 BESTech BioFeed FS. ...
Manufactured by:BESTechnologies, Inc. based inSarasota, FLORIDA (USA)
This 2.5 gallon capacity Hand Sprayer is used to dispense our Part #8281 or #8282 BESTech Floor Drain ...
Manufactured by:BESTechnologies, Inc. based inSarasota, FLORIDA (USA)
This weather resistant Dispenser is installed near the incoming wastewater flow of a Treatment Plant and dispenses our Part #8303 BioFeed LS/TP (depending on the severity of the problem). NOTE: Part #8236 Lift Station Dispenser and Part #8237 Treatment Facility Dispensers are identical except #8236 uses a spray nozzle on the free end of the dispense tube. The spray head is not used on Part #8237 ...
Manufactured by:BESTechnologies, Inc. based inSarasota, FLORIDA (USA)
Includes a 1.5-gallon hand Sprayer and one 1-gallon size pack of FOG-Away, enough to service the floor drains of a typical restaurant for a full 30-day cycle. Treats approximately 15-20 floor ...
Manufactured by:BESTechnologies, Inc. based inSarasota, FLORIDA (USA)
This weather resistant Dispenser is suspended inside a manhole upstream from a trouble spot and dispenses our Part # 8302 BioFeed FS product into the wastewater stream below the ...
Manufactured by:BESTechnologies, Inc. based inSarasota, FLORIDA (USA)
Fits ¼” OD plastic tubing (.170 ID) to prevent contaminates from passing. Sold in poly bags containing 10 ...
Manufactured by:BESTechnologies, Inc. based inSarasota, FLORIDA (USA)
Two schools of thought exist regarding methods for testing and comparing the efficacy of biological drainline maintenance products. One states that the widely differing environmental conditions present at various food service facilities minimize the usefulness of testing a particular product at one or a small number of locations, and that only laboratory testing under controlled conditions ...
Manufactured by:Bestech Australia Pty. Ltd. based inDingley, AUSTRALIA
The BPC4000 is an advanced educational equipment designed to study and compare the performance characteristics of four distinct industrial pumps; centrifugal, volumetric screw, piston, and turbine. This fluid dynamics training system enables students and engineers to understand flow curves, pressure characteristics, and pump efficiency across a range of operating ...
Manufactured by:Bestech Australia Pty. Ltd. based inDingley, AUSTRALIA
The Jet propulsion test stand is a fully instrumented teaching equipment helpful for students studying thermodynamics and propulsion. It allows them to analyze the performance of two different types of jet engines. The trainer unit enables the demonstration and investigation of the ramjet principle and pulsejet principle by performing instructive experimental activities. Students can measure key ...