- Home
- Equipment
Refine by
Babbitt Environmental Equipment & Supplies
17 equipment items found
Manufactured by:Babbit International Inc. based inHouston, TEXAS (USA)
The Babbitt LG-Series magnetic level gauge consists of a float chamber, a float, and an external indication device. The float chamber is basically a column of 2 1/2 inch pipe with process connections to match those of the storage tank, reactor, drum, column or other equipment where level is to be measured. These connections may be side couplings or flanges, or top and bottom ...
Manufactured by:Babbit International Inc. based inHouston, TEXAS (USA)
Emissions from dust collectors and bag houses has become a major environmental issue. Babbitt has two products which monitor these processes, and assist in reducing the level of dust emissions. The FS10000 Flow Switch is able to alarm and/or shut down a dust collector when a weak filter is detected BEFORE it becomes a major failure and source of dust emissions. With the FT 4100 Flow Transmitter, ...
Manufactured by:Babbit International Inc. based inHouston, TEXAS (USA)
The FS10000 is designed to detect the flow of dust, granular or powered materials in a pneumatic conveying line or chute. This flow switch is espacecially suited to detect the flow of dust resulting from a ruptured filter bag in a bag house or dust ...
Manufactured by:Babbit International Inc. based inHouston, TEXAS (USA)
The PM 1 and PM 1 PRO are single-point/basic functionality dust particulate monitors, employing charge induction sensing for reliable continuous monitoring of dust particulate in stacks, ducts and pipes. Applications include filter leak detection, cyclone overflow and powder flow/no ...
Manufactured by:Babbit International Inc. based inHouston, TEXAS (USA)
The DP20T is a heavy duty, maintenance free low pressure transmitter designed for fabric filters, cyclones, powder processes and low pressure particulate laden pipes.The unique flush/ported design enables configuration for either differential or static movement. The ability to transmit accurate measurements below 10 W.C., over a broad temperature range without clogging, makes the DP20T the ideal ...
Manufactured by:Babbit International Inc. based inHouston, TEXAS (USA)
The MLS-4EX series multi-float level switch is a simple and reliable way to sense fluid levels. This multi-point unit provides a low cost method of monitoring multiple liquid level points inside of a tank or sump. MLS-4EX units are custom length and can be configured with “up to four” independent switch activation ...
Manufactured by:Babbit International Inc. based inHouston, TEXAS (USA)
The LS7000/2 dual-point RF level switch uses the proprietary radio frequency (RF) balanced impedance bridge. It is specifically designed to automatically fill or empty a tank, vessel or sump. The high and low set points are adjustable over the entire length of the probe. This unit is designed for use in homogeneous ...
Manufactured by:Babbit International Inc. based inHouston, TEXAS (USA)
The LS8000/2 dual-point level switch can measure virtually any liquid, dry material (2 probe configuration) or interface of electrically conductive or non-conductive products. The proprietary radio frequency (RF) balanced impedance bridge has exceptional temperature stability, thus eliminating the need to recalibrate the unit from season to season. The LS8000 can be configured for single-point, ...
Manufactured by:Babbit International Inc. based inHouston, TEXAS (USA)
The LS2000 is a simple, low cost point level switch that provides reliable level detection in a wide variety of liquid and dry materials. Unlike mechanical devices, the LS2000 level switch has no moving parts to wear out, jam or break, significantly reducing the need for regular maintenance and cleaning. Calibration is a snap, one piece design makes installation quick and easy. Proprietary ...
Manufactured by:Babbit International Inc. based inHouston, TEXAS (USA)
The LS6000 is an economical, basic feature point level switch that can sense a wide range of liquid and dry materials. Its robust design and durable Delrin insulator make this unit well suited for use in dry materials, such as powders, sand, aggregate, grain or other bulk solids. Unlike rotating paddles, vibrating forks or other mechanical instruments, the LS6000 level switch has no moving ...
Manufactured by:Babbit International Inc. based inHouston, TEXAS (USA)
The LS8000 remote-mounted level switch is the perfect choice when it is unsafe or inconvenient to mount the electronics directly to the probe. All calibration, time delay and fail safe adjustments are located on the remote electronics card, which can be mounted up to a mile away. The ultra-sensitivity adjustment on the LS8000 level switch allows sensing of the driest powders, fines and flakes. ...
Manufactured by:Babbit International Inc. based inHouston, TEXAS (USA)
LTM Magnetostrictive level transmitters offer accurate, safe and reliable continuous level indication and control in hazardous and non-hazardous applications. The LTM is a loop-powered 24VDC liquid-level transmitter available as a direct insertion transmitter or as an external mounted transmitter onto a Magnetic Level Indicator for non-invasive level control. The LTM’s design is customized ...
Manufactured by:Babbit International Inc. based inHouston, TEXAS (USA)
The FT4100 is designed to sense dust emissions passing through a filter in a dust collector or bag house. This very sensitive device allows the user to continuously monitor the level of emission, and record the ...
Manufactured by:Babbit International Inc. based inHouston, TEXAS (USA)
The LT9000 level transmitter provides continuous measurement of electrically conductive liquids that do not leave a sticky residue or buildup. Ideal solution for short measuring ranges or tanks and vessels containing obstructions that would normally interfere with non-contact type sensors. Measurement is unaffected by changes in pressure, temperature or media density. No moving parts eliminates ...
Manufactured by:Babbit International Inc. based inHouston, TEXAS (USA)
The LS7000 has features that make it the most versatile level control switch on the market today. As our most popular point level switch, this unit can sense virtually any liquid or dry material. It can even be used for liquid interface applications to detect the level of immiscible liquids that have different dielectric constants such as oil and water. The unit features an on-board test switch ...
Manufactured by:Babbit International Inc. based inHouston, TEXAS (USA)
RADAR level transmitters allow simple and reliable non-contact level measurement of fluids in a metal tank. The microprocessor-controlled electronics transmit a 6.3 GHz electromagnetic pulse at the fluid's surface, which is then reflected back to the antenna. The 'round trip' time of flight is then calculated to determine the fluid level in the ...
Manufactured by:Babbit International Inc. based inHouston, TEXAS (USA)
The Babbitt ABM Series Ultrasonic Level Transmitter allows simple and reliable non-contact level measurement of fluids in a tank, sump or other container. The microprocessor-controlled circuit generates a pulse that is transmitted from the transducer face. This pulse is reflected back from the surface of the liquid. The 'round trip' transit time is then converted into the current output, which is ...