- Home
- Equipment
Refine by
Berg Environmental Equipment & Supplies
31 equipment items found
Manufactured by:WM Berg based inCudahy, WISCONSIN (USA)
Geneva Mechanisms are timing devices that are used applications where intermittent motion is desired. Shaft Size: 1/4”. Material: Stainless Steel. Output Torque: 35 in. oz. – 120 in. ...
Manufactured by:Berg Equipment Corporation based inMarshfield, WISCONSIN (USA)
Large cleanout holes at idler end Six greaseable bearings. Sliding motor mount (top mount or bottom mount). Length can be changed on the job. Heavy gauge galvanized steel construction. Weather protection covers are available. Paddle size: 10-1/2" long x 2-1/2" high. #67 Pintle chain is standard. #62 Detachable chain is optional. Length (maximum) 80 feet. Maximum span allowed is 20 feet. ...
Manufactured by:A.P. van den Berg based inHeerenveen, NETHERLANDS
The versatile high-performance CPT unit was invented by A.P. van den Berg and has a track record of more than 25 years. With its tracks retracted, the Track-Truck can run on the highway as an ordinary truck. After lowering the tracks, the Track-Truck is in its element in soft and hilly terrain where other heavy vehicles get stuck. Even ditches are easily conquered. The track system reduces the ...
Manufactured by:A.P. van den Berg based inHeerenveen, NETHERLANDS
The A.P. van den Berg CPT Truck is a vehicle suitable for soil investigations in pushing capacities from 140 to 200 kN or even more. A.P. van den Berg has more than 40 years’ experience in manufacturing CPT Trucks based on many diff erent trucks and models. The all-wheel drive 6x6 model has proven most popular among customers. The frame of the truck is reinforced with a sub frame to take ...
Manufactured by:A.P. van den Berg based inHeerenveen, NETHERLANDS
The Midi CPT Crawler is a compact and manoeuvrable CPT system, with a maximum power of 20 tons. The Midi CPT Crawler consists of the renowned CPT penetrometer (HYSON 200 kN) mounted on an undercarriage with rubber tracks. With a weight of about 3,500 kg and a width of only 1200 mm the Midi CPT Crawler fits trough small passages and can be transported in a small truck. To provide the required ...
Manufactured by:BERG Chilling Systems Inc. based inToronto, ONTARIO (CANADA)
Berg Chilling Systems Inc.’s indoor air cooled industrial chillers are designed for applications where it is desirable to convert the heat from molds, rolls, etc. into hot air to provide facility heat. These units, also known as heat recyclers, provide supplemental heating for a plant in the winter and ventilation during summer. This is achieved by changing the damper settings in the ...
Manufactured by:BERG Chilling Systems Inc. based inToronto, ONTARIO (CANADA)
Berg industrial outdoor air cooled chillers are used to conserve plant floor space by enabling the cooling system to be placed outside, either beside the building or on the ...
Manufactured by:SEIBOLD Wasser - Analysatorenfabrik GmbH based inKlosterneuburg, AUSTRIA
This process analyser was developed and built for industrial waste water and drinking water Industry. The main advantages are the combined measurement in one measurement step and the use of non toxic and non hazardous ...
Manufactured by:BERG Chilling Systems Inc. based inToronto, ONTARIO (CANADA)
A seawater-cooled central chiller, designed for outdoor operation on board an off-shore drilling rig. The system was custom-designed to provide air-conditioning for the living accommodations. With customers worldwide, in industries such as fishing, seafood, poultry, red meat, produce, baking, etc., Berg Chilling Systems Inc. has established a reputation of manufacturing only the highest quality ...
Manufactured by:WM Berg based inCudahy, WISCONSIN (USA)
Gearboxes are mechanisms that use gears to provide speed and torque conversions from a rotating power source to another device. Types: Worm, Bevel, Miter, Servo and Speed Reducers. Shaft Size: 1/8”, 3/16” or 1/4". Output Torque: 48 in. oz. – 500 in. ...
Manufactured by:WM Berg based inCudahy, WISCONSIN (USA)
Lead Screw Assemblies provide an economical solution for the transfer of rotary motion to linear motion. Materials: 6061 Aluminum or 416 stainless steel. Lead accuracy of ±.006 in/ft. Size: diameters from 3/16" to ...
Manufactured by:WM Berg based inCudahy, WISCONSIN (USA)
Cam Assemblies are for transforming rotary motion into linear motion. Cam Followers, Roller Bearing Cam Followers and Adjustable Assemblies. Material: Stainless ...
Manufactured by:SEIBOLD Wasser - Analysatorenfabrik GmbH based inKlosterneuburg, AUSTRIA
Basic Information: This process analyser was developed and built for industrial waste water and drinking water Industry. The main advantages are the combined measurement in one measurement step and the use of non toxic and non hazardous ...
Manufactured by:Berg Equipment Corporation based inMarshfield, WISCONSIN (USA)
The Berg Cross Alley Screw Conveyor is designed to move bedded or sand laden manure horizontally across facility to a holding area. The drive can be located at either end of ...
Manufactured by:Berg Equipment Corporation based inMarshfield, WISCONSIN (USA)
Move manure quickly from the barn to the spreader. BERG Augers offer superior strength and durability, with strong 10 gauge steel trough. Select from 2 sizes: 12" or 16" diameter screw with 1/4" fliting and lengths from 12' to ...
Manufactured by:BERG Chilling Systems Inc. based inToronto, ONTARIO (CANADA)
End users and contractors can now remove ammonia from refrigeration systems knowing their health and safety are protected. Ammonia is an energy-efficient and cost-effective refrigerant but it needs to be properly handled when servicing your system. If ammonia finds its way into your facility’s atmosphere, it is more than just a bad smell. It poses a threat to your primary operating ...
Manufactured by:Frank Berg industrial supplies BV based inDelft, NETHERLANDS
12V and 24V DC Diesel pumps, Fuel transfer pumps, diesel tanks, diesel filters and accessories, hose reels for diesel. ...
Manufactured by:BERG Chilling Systems Inc. based inToronto, ONTARIO (CANADA)
Specifically chosen for your conditions, these chemical treatment units automatically control the release of agents into your water to control scale, suspended solids, and microbiological growth in your system. Compact and flexible for your cooling tower and chilled water ...
Manufactured by:A.P. van den Berg based inHeerenveen, NETHERLANDS
The CPT Crawler provides the same high production rates and reliability as the CPT Truck, with the advantage of tracks for better manoeuvrability in rough or soft terrain. The crawler is the only option at sites where the maximum allowed height is limited. Of course a separate carriage is required for transport of the crawler. The twin-cylinder HYSON 200 kN can be built on a 15 tons crawler which ...
Manufactured by:A.P. van den Berg based inHeerenveen, NETHERLANDS
A CPT Crawler that is based on an existing crawler vehicle is the CPT Morooka Crawler, a relatively fast CPT Crawler for very soft soil. The unit is built on a low ground pressure 15-ton crawler chassis. The rig is fast (with speeds of over 12 km per hour) and can travel long distances on asphalt or concrete surfaces without causing surface damage. The crawler tracks are made of rubber. The ...