- Home
- Equipment
Refine by
Applications
- Agitation and mixing solutions for bio technology
- Agitation and mixing solutions for water and wastewater treatment.
- Agitation and mixing solutions for flue gas desulfurization
- Agitation and mixing solutions for oil & gas
- Agitation and mixing solutions for pulp & paper
- Agitation and mixing solutions for polymer / plastics
- Agitation and mixing solutions for mineral processing
- Agitation and mixing solutions for general applications
Chemineer Environmental Equipment & Supplies
27 equipment items found
Manufactured by:National Oilwell Varco (NOV) based inHouston, TEXAS (USA)
USA - Europe 72-hour delivery 30-day 'No Risk Trial' Total support for your mixing need 50+ years experience in mixer technology Industry standard IEC, off-theshelf motors from 0.18 to 1.5kw Features and Benefits Motors: Direct ...
Manufactured by:National Oilwell Varco (NOV) based inHouston, TEXAS (USA)
The JT-2 Impeller has been developed for superior blending in transitional flow. Higher viscosity and non-Newtonian fluids make blending much more challenging. This impeller is used after conventional turbines have lost efficiency due to viscous effects and before the need for close clearance ...
Manufactured by:National Oilwell Varco (NOV) based inHouston, TEXAS (USA)
A reasonably cost effective impeller in both turbulent and laminar flow. Good impeller for applications where the viscosity changes over a wide range causing the flow regime to vary between turbulent and laminar flow. A reasonably cost effective impeller for solids ...
Manufactured by:National Oilwell Varco (NOV) based inHouston, TEXAS (USA)
The Chemineer® SC-3 Impeller features an advanced design engineered for deep tanks. It produces flow characteristics of much larger impellers, without the added weight, or the resulting loss in pumping efficiency. The highly efficient SC-3 Impeller's reduced weight allows for the use of longer shaft extensions for deeper tanks, and resolves associated critical speed limitations. The use of an ...
Manufactured by:National Oilwell Varco (NOV) based inHouston, TEXAS (USA)
HT Turbine Agitators have earned a worldwide reputation for long life, flexibility and ruggedness. As a result, they are the preferred agitators of many industries for harsh, demanding environments where peak performance is integral. HT Turbine Agitators are robust, simple and designed for ease of maintenance. The Chemineer HTM mixer is an available option for high torque applications and ...
Manufactured by:National Oilwell Varco (NOV) based inHouston, TEXAS (USA)
Chemineer has demonstrated that it is possible to provide a mixer designed for agitator service at an economical cost, backed by over fifty years of design expertise and applications experience. Chemineer’s MID RANGE Mixers combine quality, durability and economy to supply unbeatable value in mixing equipment for the chemical, water and general processing industries. The MR agitators are ...
Manufactured by:National Oilwell Varco (NOV) based inHouston, TEXAS (USA)
The CD-6 impeller is a second generation gas and immiscible liquid dispersion impeller. The CD-6 can handle about 2.4 times the maximum gas capacity of the D-6 impeller. The CD-6 is similar to the Smith impeller, but there are substantial power and dispersion capability differences. This impeller has been used at aeration numbers as high as ...
Manufactured by:National Oilwell Varco (NOV) based inHouston, TEXAS (USA)
Chemineer's sanitary mixers offer a variety of design configurations, materials and options needed to meet critical sanitary mixing applications and ensure the highest level of sanitary mixing. Chemineer also offers a wide variety of precision-engineered, high-performance impeller ...
Manufactured by:National Oilwell Varco (NOV) based inHouston, TEXAS (USA)
Highest gas dispersing capability available. Can disperse nearly six times the gas handling capability of the D-6 or Rushton impeller. Unloads less than the CD-6. In fact, the unloading is nearly all due to the change in effective density of the gassed liquid. The mass transfer capability is on the order of 10% better than the CD-6. Unlike many other gas dispersing impellers, the BT-6 is ...
Manufactured by:National Oilwell Varco (NOV) based inHouston, TEXAS (USA)
ChemSeal is a true Chemineer mixer seal designed for demanding top entry agitator applications where shaft movements are larger, speeds are slower and conditions more variable than those encountered by pump ...
Manufactured by:National Oilwell Varco (NOV) based inHouston, TEXAS (USA)
An extremely efficient turbulent flow impeller for blending, heat transfer and solids suspension. Most effective for Reynolds numbers over 50. Developed to minimize the creation of trailing vortices and incorporating the otherwise wasted energy into ...
Manufactured by:National Oilwell Varco (NOV) based inHouston, TEXAS (USA)
The Chemineer QED Plus Mixer combines Quality, Economy and Durability for unbeatable mixing value. QED Plus Mixers are well-suited for agitator service in chemical processing, petrochemical, pharmaceutical and general industrial ...
Manufactured by:National Oilwell Varco (NOV) based inHouston, TEXAS (USA)
The highest efficiency turbulent flow impeller available in the marketplace. Ideal for blending, heat transfer, and solids suspension applications. Developed to maximize strength at lower weights as compared to other axial flow impellers, allowing for longer shafts without internal support, smaller shaft diameters, and smaller seal sizes if ...
Manufactured by:Yantai Chemins Instrument Co., Ltd. based inZhaoyuan, CHINA
With automatic temperature compensation. Output standard Rs485 (Modbus/RTU protocol) digital signal or 4~20mA signal. The Rs485 signal is easily connected to third-party devices such as PLCs, DCS, industrial control computers, general-purpose controllers, paperless recording instruments or touch screens. Parameter settings are more convenient and faster. The calibration function provides a quick ...
Manufactured by:Yantai Chemins Instrument Co., Ltd. based inZhaoyuan, CHINA
With automatic temperature compensation. Output standard Rs485 (Modbus/RTU protocol) digital signal or 4~20mA signal. The Rs485 signal is easily connected to third-party devices such as PLCs, DCS, industrial control computers, general-purpose controllers, paperless recording instruments or touch screens. Parameter settings are more convenient and faster. The calibration function provides a quick ...
Manufactured by:Yantai Chemins Instrument Co., Ltd. based inZhaoyuan, CHINA
With automatic temperature compensation. Output standard Rs485 (Modbus/RTU protocol) digital signal or 4~20mA signal. The Rs485 signal is easily connected to third-party devices such as PLCs, DCS, industrial control computers, general-purpose controllers, paperless recording instruments or touch screens. Parameter settings are more convenient and faster. The calibration function provides a quick ...
Manufactured by:Yantai Chemins Instrument Co., Ltd. based inZhaoyuan, CHINA
With automatic temperature compensation. Output standard Rs485 (Modbus/RTU protocol) digital signal or 4~20mA signal.The Rs485 signal is easily connected to third-party devices such as PLCs, DCS, industrial control computers, general-purpose controllers, paperless recording instruments or touch screens. Parameter settings are more convenient and faster. The calibration function provides a quick ...
Manufactured by:Yantai Chemins Instrument Co., Ltd. based inZhaoyuan, CHINA
With automatic temperature compensation. Output standard Rs485 (Modbus/RTU protocol) digital signal or 4~20mA signal. The Rs485 signal is easily connected to third-party devices such as PLCs, DCS, industrial control computers, general-purpose controllers, paperless recording instruments or touch screens. Parameter settings are more convenient and faster. The calibration function provides a quick ...
Manufactured by:National Oilwell Varco (NOV) based inHouston, TEXAS (USA)
The Chemineer RL-3 impeller is designed for applications where a ragless agitator is desired to prevent fibrous material build-up on the rotating impeller. Typical in Waste Treatment applications the RL-3 is a rag shedding impeller which prevents build-up of fibrous materials on the impeller, while providing a strong axial flow for efficient blending and solids ...
Manufactured by:National Oilwell Varco (NOV) based inHouston, TEXAS (USA)
Direct-drive and gear-reduced designs for both open and closed tank applications are available. Each unit features Chemineer's renowned reputation for quality that has grown over the past 50 ...