- Home
- Equipment
Refine by
Demon Environmental Equipment & Supplies
12 equipment items found
Manufactured by:Blue Demon Co. Inc. based inLebanon, GEORGIA (US) (USA)
The Series AC-600 bit is designed for heavy weight drilling, usually employing the use of 23/8' (60.3mm) or 27/8' (73mm) tool joint or heavy-duty drill pipe to drill holes from 4¼' (108mm) through 55/8' (142.9mm). While drilling through shale and other formations of similar strength with 6' (152.4mm) or larger bits using 3½' (88.9mm) and 4½' (114.3mm) drill pipe, it is ...
Manufactured by:ELIQUO WATER GROUP GmbH based inBad Homburg, GERMANY
The DEMON nitrogen removal technology has been developed by the University of Innsbruck and is world-wide provided by the company DEMON GmbH and Sweco (The Netherlands, UK and Scandinavia). ELIQUO has designed, constructed and delivered various liquor treatment plants in Europe. Recently ELIQUO has completed the contract for the liquor treatment project at the WWTP of Echten in the ...
Manufactured by:Blue Demon Co. Inc. based inLebanon, GEORGIA (US) (USA)
The Type MP-200 bit was developed specifically for mineral exploration, coal test, foundation test and grout hole drilling. Also commonly used for drilling inside small diameter tubing in both the oil and water well industries. The MP-200 Series bits are designed for use on lightweight drilling equipment. The Rock Cutter Blades perform best in soft formations. The carbide Insert Blades are ...
Manufactured by:Blue Demon Co. Inc. based inLebanon, GEORGIA (US) (USA)
The Type SH-800 bit is primarily designed for drilling with extra-heavy weights. Such drilling equipment generally uses up to 3½' 88.9mm) or 4½' (114.3mm) drill pipe. In formations predominantly shale where hard stringers are encountered, the 55/8' (142.9mm) through 8¾' (222.2mm) Insert Blades are most successful. In softer formations where 3½' (88.9mm) or larger drill ...
Manufactured by:Blue Demon Co. Inc. based inLebanon, GEORGIA (US) (USA)
The Blue Demon BDC Drill Head was developed to drill in harder formation rock with the same shearing action as our BD and BDA Drill Heads. The BDC Drill Head utilizes the same body, but with a round hole to accept our R-550CS conical bit. This tool comes with a sleeve retainer for maximum holding power in the tool, but can be easily removed from the head with our R-550 puller. The capped carbide ...
Manufactured by:Blue Demon Co. Inc. based inLebanon, GEORGIA (US) (USA)
Pilot cutting tools available in 1-8 UNC thread and 1 1/4 -5 stub acme ...
Manufactured by:Blue Demon Co. Inc. based inLebanon, GEORGIA (US) (USA)
Newest pilot bit where carbides track each other on opposite sides for maximum penetration and faster cuttings removal in soft and medium ...
Manufactured by:Blue Demon Co. Inc. based inLebanon, GEORGIA (US) (USA)
Rock Cutter Blades are low-cost, replaceable blades for soft formations and are forged of tough alloy steel. They are hardfaced on the cutting surfaces with tungsten carbide particles of maximum hardness made to Blue Demon specifications. These heat-treated blades are highly efficient in abrasive formations because of their self-sharpening characteristics. This permits maximum drilling speed ...
Manufactured by:APG-Neuros Inc. based inBlainville, QUEBEC (CANADA)
DEMON® involves two process steps- the partial nitritation of ammonia and the subsequent anaerobic oxidation of the residual ammonia by nitrite to nitrogen gas. Partial nitritation requires a oxygen demand of only 40 % compared to conventional nitrification. No carbon dosage (Methanol) is required due to the autotrophic nature of the ...
Manufactured by:Blue Demon Co. Inc. based inLebanon, GEORGIA (US) (USA)
The Blue Demon BD with BD-2 bits is a 3-wing, prop-type drill head that can increase auger drilling rates by 50% or more in soft to medium formations. Instead of tearing or gouging, the BD Drill Head shears off rock in a shaving action. This eliminates strain on bits and lengthens their effective service life. It also reduces weight needed for rapid penetration and resultant possibility of bits ...
Manufactured by:Blue Demon Co. Inc. based inLebanon, GEORGIA (US) (USA)
The BDA brings all the advantages of the Blue Demon BD to air drilling. It's a specially designed tool that substantially increases penetration rates and reduces costs in soft to medium rock formations. When compared with ordinary drill heads with rotating bits, the BDA will cut up to twice the footage daily in soft shales, clays, shells, soft limestone, red beds and other rocks of low ...
Manufactured by:Blue Demon Co. Inc. based inLebanon, GEORGIA (US) (USA)
BD-2 Bit is precision machined to closest possible tolerances for long, trouble-free service. Its oversized carbide cuts faster...never balls up...retains its original effectiveness far longer. Tapered shank of the BD-2 drive fits into the drillhead without wedges or set screws. It can't wobble or work loose. And, unlike blade-type drill heads, BD-2 Bits are easily replaced with hammer punch (see ...