- Home
- Equipment
Refine by
Dinex Environmental Equipment & Supplies
10 equipment items found
Manufactured by:Dinex A/S based inMiddelfart, DENMARK
The primary function of DOC in a Diesel ATS is to ensure sufficient oxidation of CO and THC, and to oxidise, NO in the exhaust to ...
Manufactured by:Dinex A/S based inMiddelfart, DENMARK
The primary function of SCR catalyst in a diesel ATS is to convert harmful nitrogen oxides (NOx = NO + NO2) in the exhaust gas to nitrogen and water. The SCR reaction takes place on the catalyst, in the presence of NH3 generated from AdBlue (Urea and water solution) upfront the SCR catalyst. Advanced emissions regulations like EU VI /EPA/China N6/Bharat 6 need above 95% NOx conversion levels and ...
Manufactured by:Dinex A/S based inMiddelfart, DENMARK
SCR-DPF technology integrates the SCR reaction function into the particle filter (DPF) by enabling compact ATS systems, quick warm up and early dosing possibility. This relatively new technology has quickly gained relevance and application in off-road segment, where especially space restriction is a key challenge. Dinex SCR-DPF coating technologies are zeolite-based and offer excellent NOx ...
Manufactured by:Dinex A/S based inMiddelfart, DENMARK
The primary function of a three-way catalyst (TWC) in a CNG/LNG ATS is to convert and minimise emissions of harmful species like THC, CO and NOx below the regulatory limits. The TWC by Dinex is a Pd-Rh-based technology with high surface area wash coat formulation which contains high oxygen storage capacity (OSC) materials, stabilisers and promoters with optimised active (PGM) metal ...
Manufactured by:Dinex A/S based inMiddelfart, DENMARK
The Dinex methane oxidation catalyst for lean-burn CNG engines is based on a high surface area wash coat with Sulphur resistant components. It is suitable for mobile or stationary applications. The highly dispersed PGM nanoparticles with Pt-Pd or Pt only formulation suit the emission demands according to the requirements. It is available on metallic as well as on ceramic substrates with excellent ...
Manufactured by:Dinex A/S based inMiddelfart, DENMARK
The primary function of DPF in a Diesel ATS is to trap and oxidise the soot particulates in the exhaust. The DPFs are typically coated with a low PGM content wash coat and are typically known as catalysed DPFs (C-DPF) to ensure further oxidation of NO towards NO2 within DPF and to assist in keeping the soot amount in DPF below the designated level. Dinex DPF coating technologies are based on a ...
Manufactured by:Dinex A/S based inMiddelfart, DENMARK
The substrates feature a grooved lock mechanism that provides the necessary mechanical resistance while improving flow dynamics. Made with high quality stainless steel, they are lightweight and easy to integrate into the exhaust system. The use of thin foils allows fast heating and an improvement in turn mass transfer rates while maintaining a low backpressure. For applications where high ...
Manufactured by:Dinex A/S based inMiddelfart, DENMARK
At Dinex, we consider the exhaust system as a high technology system, which provide a safe exhaust path between the turbo and the after-treatment system. The ATS system requires high temperatures in order to provide the right emission levels according to the standards that have pushed the demand for higher technology ...
Manufactured by:Dinex A/S based inMiddelfart, DENMARK
The primary function of a DPF is to trap and reduce particulate matter mass (PM) in the diesel exhaust by > 95 % and the particulate number (PN) by > 99 % at the cost of minimal possible back pressure and should be able to sustain high thermal ...
Manufactured by:Dinex A/S based inMiddelfart, DENMARK
The primary function of a metallic filter based primary oxidation catalyst (POC) is to reduce the particulate matter mass (PM) by at least 40 – 50% and find application in some older generation emissions regulations like EU IV and some current and upcoming off-road regulations in developing countries like ...