- Home
- Equipment
Refine by
Entec Environmental Equipment & Supplies
15 equipment items found
Manufactured by:Entec AG Consulting & Engineering based inSt Gallen, SWITZERLAND
Our robust and universal oil-hydraulic actuator units TA-14 perform demanding control tasks independently. They contain an electronic controller, which can act as an independant subsystem or as a slave. The TA-14 can be parameterized to meet various needs. The TA-14 actuator units can also be fully integrated in a digital system such as our ...
Manufactured by:Entec International BV based inBarendrecht, NETHERLANDS
The drive shaft is driven directly by the engine. The propeller is a “boat screw”. The ideal solution for small tanks up to 1,000 litres. The fast rotating mixers can be used for many applications such as mixing and dissolving chemicals, the production of paint and glue and for almost all waste water processes. The drives are available in three phases, one phase and air motor. ...
Manufactured by:Entec International BV based inBarendrecht, NETHERLANDS
Since the 90s widely known and widely applied, but ready for improvements. The Hyperboloid mixers are perhaps the most recognizable in shape in the world of (waste) water treatment. Since the 1990s, Entec has installed more than 1300 in the Benelux alone! That makes Entec the expert in the field of (waste) water mixing technology with irreplaceable experience, knowledge and ...
Manufactured by:Entec International BV based inBarendrecht, NETHERLANDS
Floating design and therefore easy to use anywhere. ENTEC® surface aerators provide an extremely flat and almost horizontal spray of 360 ° around the device. Wide range of applications, from surface water management to activated sludge installations, SBR and MBR ...
Manufactured by:Weber Entec GmbH & Co. KG based inWaldbronn, GERMANY
The expectation of operating waste water treatment plants as energy-independently as possible increases the pressure on local authorities and plant operators, not just financially, but increasingly also politically. However, it is not possible to achieve this aim by means of the “classical” fermentation process, in spite of mature technologies. Additional expenditures, such as the ...
Manufactured by:Entec International BV based inBarendrecht, NETHERLANDS
Element type: STT, STS, STL and STM. Area of application: food, oil and gas industry, petrochemicals, pulp and paper production. General design in steel/special, with fixed and/or removable elements and a standard finish. Available with heating-/cooling jackets and injectors-/connection ...
Manufactured by:Entec International BV based inBarendrecht, NETHERLANDS
Element type: STT and STS. Area of application: food, pharmaceutical and soft drink industry, breweries. Hygienic design in polished stainless steel with removable elements, in a custom finish. Designed for CIP, available in IDF, RJT, DIN and with metal end connections. Injectors, heating-/cooling jackets are also ...
Manufactured by:Entec International BV based inBarendrecht, NETHERLANDS
Static mixers have been used in drinking water and waste water treatment for many years to dissolve gases in large-scale applications. The effectiveness of these mixers depends on the size of the gas bubbles formed. Due to the increasingly higher quality requirements that both the government and end-users set for drinking water and waste water, it is necessary to constantly innovate in this ...
Manufactured by:Entec International BV based inBarendrecht, NETHERLANDS
The mixer is driven by an electrical drive equipped with a reduction box. Depending on the application, this series has different propeller shapes with two, three or four blades. This series is suitable for tanks up to a volume of 180 m3. These mixers ensure strong mixing and cause little turbulence. The mixers can be used for mixing solids (e.g. PE) in liquid and keeping liquids ...
Manufactured by:Entec International BV based inBarendrecht, NETHERLANDS
The mixer is driven by an electrical drive equipped with a reduction box. Here as well, different propeller shapes are available with two, three or four blades, depending on the application. This series is suitable for tanks from 180 m3 to 1,500 m3. These mixers are designed for high efficiency with large volume basins and therefore have a favourable energy consumption. We can divide this series ...
Manufactured by:Entec International BV based inBarendrecht, NETHERLANDS
Very powerful and large - Up to Ø 8000 mm. Suitable for non-Newtonian liquids up to 950 mPa · s. Individually designed and manufactured to meet the process requirements of the customer. Very powerful and very large (Ø 8000 ...
Manufactured by:Entec International BV based inBarendrecht, NETHERLANDS
Both the innovative mixing body and the drive shaft are made entirely of stainless steel (absolutely no osmosis is possible). Partly due to the choice of materials and modifications to the design bases, the mixer has evolved into (as good as) indestructible! Now recognized in various industries such as: (waste)water treatment plants (WWTP), (petro)chemical-, cosmetic-, concrete-, paint- and paper ...
Manufactured by:Entec International BV based inBarendrecht, NETHERLANDS
Coarse bubble aeration with Stainless steel tube aerators. 100% maintenance-free aeration system! ENTEC® stainless steel coarse bubble aerators are available in 304L and 316L stainless steel. They have a reliable alpha value and are designed to cover the floor of the tank economically. Very robust and 100% ...
Manufactured by:Entec International BV based inBarendrecht, NETHERLANDS
Type ESKM-9.0 channel mixers for perfect mixing. Also for your WWTP! Independent tests have shown that the ESKM concept is the most efficient of all known static mixers. ESKM mixing elements are ideal for adding chemical agents as a fundamental part of the total water treatment. Overdose due to poor mixing is thus prevented. The saving on chemical agents is therefore considerable! The plug flow ...
Manufactured by:Entec International BV based inBarendrecht, NETHERLANDS
Strongest membrane - Smallest bubble. Optimal aeration with the Entec aeration discs. ENTEC® fine bubble aeration discs consist of an EPDM membrane and a polypropylene housing. Due to their constant development, the ENTEC® aeration membranes have an excellent efficiency and a long service life with the additional advantage of low maintenance ...