- Home
- Equipment
Refine by
Entech Environmental Equipment & Supplies
29 equipment items found
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
The FlowProfessor™ automatically adjusts the flow setting of the CS1200E to obtain the correct flow every time. The sophisticated software even adjusts for estimated field temperatures and sampling site elevation to optimize sampling rates under any environmental condition. Trying to accomplish those calculations manually can be difficult at ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
The internal Silonite® coated sealing spring in a MicroValve™ is stronger than those used in Swagelok® Miniature Quick Connects, to further reduce the potential for leaks even at cold storage temperatures (-15°C). A compression fitting cap is also available, which when used with the MicroValve™ creates a lower combined leak rate than any other currently accepted canister ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
Low Level TO-15 monitoring requires consistent analyte recovery while collecting the maximum sample volume possible to support larger preconcentration volumes or repeat analyses from the same canister. The CS1200E will reliably fill canisters at a constant rate with better demonstrated recovery of TO-15 compounds than any other ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
The TM1200 is Entech’s next generation canister sampling timer that automatically starts and stops the sampling process at specic times. Now you can easily start a 24 hour sample at midnight and stop it at midnight the following night without having to be present. Typically operated with our CS1200Ex canister sampler to time integrate the sampling event for a 24 hour sample, the TM1200 creates an ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
Introducing the all-new 7200 | 7650-M, MillionAir™ Analysis System. The most advanced instrumentation ever developed for the analysis of volatile and light semi-volatile compounds in air and soil gas. Now, you can choose to analyze any size canister in your inventory with the quality assurance of direct inlet robotics. The 7650-M features the new MillionAir™ option and the ability to preheat ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
The IH1200 Personal Monitors utilize classical vacuum sampling into MiniCans™ and Bottle-Vacs™ to perform STEL or TWA monitoring for up to 12 hours. Like HDS Personal Monitors, sampling using the IH1200 eliminates the concentration and matrix effects associated with adsorbent-based sampling ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
Introducing the latest HDS™ (Helium Diffusion Sampling) Personal Monitor from Entech. A breakthrough technology based on helium diffusion which yields a sampler that is small, light weight, cost-effective, universal, and defensible. HDS™ Personal Monitors simplify the collection of chemicals in the workplace and deliver highly reliable results unaffected by factors that create errors in other ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
Preparing HDS™ Personal Monitors for field sampling just became a lot easier with the HDS™ Personal Monitor Prep Station! Simply attach an HDS™ Personal Monitor to the HDS-PS1 Prep Station and use a vacuum pump and cylinder containing Helium and BFT to evacuate, fill, evacuate, and fill the sampler. The personal monitor is now ready to be sent to the field. To clean samplers, simply evacuate, ...
Manufactured by:Entech - Renewable Energy Solutions Pty Ltd. based inWest Perth, AUSTRALIA
The Entech-WtGas-RES™ is available to provide up to 100% waste utilisation and landfill diversion via innovative and proven technologies, whereby post-recycled residual waste is converted from its solid phase into a gaseous phase (a methane like gas referred to as “syngas”) for firing to generate renewable energy, or for synthesis into ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
The 7650 Canister Autosampler brings the automated analysis of MiniCans™, Bottle-Vacs™, and other large volume sampling canisters to a whole new level. Building upon the advantages of its predecessors, the 7650 is the first canister autosampler to facilitate the analysis of up to twenty, 1 to 1.4L canisters while maintaining samples in a completely closed and isolated state until required for ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
Vacuum Assisted Sorbent Extraction (VASE) is a next generation extraction technique capable of greatly extending the range of extractable compounds over other headspace or even full immersion techniques. Virtually all liquid and solid samples to be analyzed by GC or GCMS are compatible with this exciting technique that was recently made even better by modifying the presentation of the Sorbent Pen ...
Manufactured by:Newland Entech Europe based inVillaviciosa de Odón, SPAIN
Newland NLQ – K / V Series Open-Channel UV Disinfection System adopts vertical modular design. Each UVC disinfection module consists of a stainless steel frame, several UV lamps, quartz sleeve with high transmittance, automatic cleaning system, power distribution system and data acquisition system. The installation mode for lamp and quartz sleeve is vertical, and lamps are staggered (the ...
Manufactured by:Newland Entech Europe based inVillaviciosa de Odón, SPAIN
Another advantage of Newland NLQ series is that the ballast has good stability and heat-emission, with a power factor higher than 0.99.The ballast is controlled by microprocessor and its power could be adjusted from 50% to 100%. The ballast module is being designed according to the consumer’s requirement, has the CE certification, and UL certification is ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
The TOV-2™ Toxic Organics Valve has been specifically designed to ensure complete recovery of low level TO-14a and TO-15 target compounds. A packless system features an ultra-compact, passivated sample path with no internal weld scars, and a Silonite® coating option for superior inertness and ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
H2S and Methyl Mercaptan recovery has continued to be a analytical challenge when sampled into canisters at PPB to sub-PPB levels. The presence of more than 10–15% relative humidity within a sampling canister has been shown to dramatically reduce reliable storage time of H2S and to a lesser extent Methyl Mercaptan, relative to dry ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
Performing unfiltered sampling into your Silonite® canister can lead to particulate contamination. This will eventually reduce volatile compound recovery, while making it more diffcult to achieve EPA required blank levels. Entech’s Grab Samplers are a great solution to keep your canisters ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
Several carrying cases are available for MiniCan™ and Bottle-Vac™ samplers. Options are based on the number and size of canisters needing to be shipped. Refer to the chart below for canister and valve compatibility. Custom kits can be made using PN 29-20810 which has pre-cut foam inserts to accommodate canisters, samplers, and test ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
We are the only manufacturer to offer the unsurpassed range, quality, and reliability of McDaniel Controls, Inc. gauges along with our exclusive, ¼” compression canister / TOV™ fitting design. The compression fitting connects easily to a dual stem canister, or our new dual port TOV™ without any need for Teflon® ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
Nickel has long been known for its superior inertness relative to even 316 stainless steel. Through years of development, Entech has created a pure Nickel ferrule that improves overall performance when compared to any other ferrule currently used for whole air sampling and analysis. The unique properties of Nickel create the best combination of inertness, low carryover, and replaceability, so ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
Two indoor air HDS™ sampling versions are available from Entech, 1) MiniCan™ and Bottle-Vac Samplers (detailed below) that feature special HDS™ MicroValves that are optimized for standard sampling event durations – the diffusion zone exists inside of the fitting. 2) Controlled helium / air exchange with an external HDS™ diffusion zone fitting (opposite page) that is designed to attach directly to ...