- Home
- Equipment
Refine by
Gp Environmental Equipment & Supplies
25 equipment items found
Manufactured by:ISRA VISION AG based inDarmstadt, GERMANY
Situation: After diffusion (standard or one-sided), there is usually a parasitic emitter present on the rear side of the cell, which is interconnected with the front across the edges. Application of cell contacts without accounting for the parasitic emitter leads to low parallel resistances, often completely shunted cells. For edge isolation, plasma etching as well as wet chemical etching ...
Distributed by:UNIMAR, Inc. based inN. Syracuse, NEW YORK (USA)
The Unimar GPS controlled beacon, P/N: USL40X provides synchronized flashing of multiple units in wind farms and other applications. The Unimar GPS controlled beacon not only provides the synchronized flashing function but also the following alarm monitoring with LED status indicators: Beacon failure. Loss of GPS pulse signal. Photocell failure. Loss of ...
Distributed by:GP Graders based inMount Waverley, AUSTRALIA
The cluster cutter is our unique singulating conveyor designed to separate bunched cherries and singulates cherries by cutting the stalk prior to ...
Manufactured by:GPS Air based inCharlotte, NORTH CAROLINA (USA)
The GPS-DM48™-AC is a lightweight, duct-mounted needlepoint bipolar ionization (NPBI™) system. The maintenance-free unit is designed for indoor or outdoor duct mounting and can handle up to 4,800 CFM or 12 ...
Manufactured by:Greener Planet Systems based inMonroe, IOWA (USA)
The PrO2-021 is our smallest unit in the PrO2 Series. Shown here equipped with the optional D/O meter, the unit can be mounted to a wall, the floor, or a truck. Due to its portable yet powerful design, the PrO2-021 is ideal for aquaculture, horticulture and laboratory applications. Capable of injecting .85 lbs. of dissolved oxygen per hour running at full capacity, it delivers at a rate of 2 GPM ...
Manufactured by:G.P.S Srl based inTerre di Reno (Fe), ITALY
HEAVY SERIES SCRAP BALERS FOR DIFFICULT CONTEXTS. Extremely powerful and robust, the HS Scrap Baler is the true boss of every scrap yard, designed to meet the multiple needs of your company, even in difficult contexts. A versatile scrap shear, with integrated support frame, ideal for cutting, compacting and baling large amounts of scrap with maximum productivity. All the flexibility you need ...
Manufactured by:G.P.S Srl based inTerre di Reno (Fe), ITALY
INCLINED SCRAP BALER FOR LONG MATERIALS. Discover the incredible power of Hawk, the inclined continuous feed shear for the processing of long materials and heavy scrap, which guarantees over 250 cuts per hour. By harnessing the force of gravity, it is able to perform extremely fast processing cycles with excellent results. ...
Manufactured by:G.P.S Srl based inTerre di Reno (Fe), ITALY
The most powerful baler in its category, guarantees maximum efficiency, even with large quantities of scrap to be processed. A modern, versatile, hybrid baler with different options and configurations to best adapt to any context. The cargo box has three powerful cylinders that generate an incredible power of 200 tonnes on the upper and side edge, ensuring maximum ...
Manufactured by:G.P.S Srl based inTerre di Reno (Fe), ITALY
Dual-compaction scrap and bodywork baler with large load compartment. Absolutely the best value for money in its category. A machine that is particularly suitable to be mounted on a three-axle semi-trailer for road usage without specific permits. The M6-DA Baler can also be equipped with a load arm with a lifting capacity of 1,400 kg at 8.6 ...
Manufactured by:Greener Planet Systems based inMonroe, IOWA (USA)
BioPro AMMO is designed to support the health of nitrifying bacteria and improve ammonia removal in wastewater streams. Our seven-strain Bacillus blend provides effective growth and treatment across a broad range of pH and ...
Manufactured by:Aliaxis Group S.A. / N.V. based inBrussels, BELGIUM
Our PE80 pipe is manufactured from MDPE rather than HDPE PE80. MDPE has a higher long term stress crack resistance than traditional HDPE ...
Manufactured by:Aliaxis Group S.A. / N.V. based inBrussels, BELGIUM
Long Spigot Fittings are suitable for electrofusion and on-site butt-fusion without any additional pupping needed (provided that machines with narrow clamps are used). Long Spigot fittings are available in SDR11 and SDR17/17.6, in sizes from 315mm to 630mm (dependent on fitting) and come in a wide range of ...
Manufactured by:Greener Planet Systems based inMonroe, IOWA (USA)
The PrO2 -154 is our largest and most flexible system. Designed for permanent installation, this unit can be used in higher volume applications such as public and private wastewater treatment plants, industrial, and large commercial applications. The PrO2-154 injects 6 lbs. of dissolved oxygen per hour running at full capacity with a delivery rate of 15 GPM in up to four separate ...
Manufactured by:Greener Planet Systems based inMonroe, IOWA (USA)
The PrO2-052 is our powerful intermediate system. Shown above with the optional D/O meter, it is a more compact iteration than the PrO2-154. This unit is designed for smaller applications and is capable of injecting 1.9 lbs. of dissolved oxygen per hour running at full capacity. The PrO2-052 has a delivery rate of 5 GPM using up to two separate ...
Manufactured by:Telemetry Solutions based inConcord, CALIFORNIA (USA)
The Nano Collars offered by Wildlife GPS Tracking Devices are among the smallest GPS tracking solutions available, yet they do not compromise on functionality. Ideal for monitoring birds, bats, and other small mammals, these collars weigh between 5 to 20 grams. Despite their tiny size, they are packed with features and offer multiple GPS data collection techniques, making them highly versatile ...
Manufactured by:GPS Air based inCharlotte, NORTH CAROLINA (USA)
The DM-2™ is the auto-cleaning needlepoint bipolar air ionization system designed for indoor duct ...
Manufactured by:GPS Air based inCharlotte, NORTH CAROLINA (USA)
The CI-2™ is an auto-cleaning, no-maintenance, needlepoint bipolar ionization system designed to fit where traditional air ionizers don‘t, including fan coils, heat pump PTACs, ductless mini splits, ceiling cassettes, ducted modules, and traditional split systems and air handlers up to 2,400 CFM. Made in the USA with U.S. and global parts. ...
Manufactured by:GPS Air based inCharlotte, NORTH CAROLINA (USA)
Auto-cleaning, lightweight needlepoint bipolar ionization (NPBI™) system that handles up to 2,400 CFM or 6 tons. Designed for multiple mounting options including fan inlet, interior duct walls or ...
Manufactured by:SMS-TORK based inÜmraniye, TURKEY
Application : Air, water, gas. Size : 1/8" … 2" BSP (on request NPT). Pressure : 0,5 bar … 16 bar (0 … 16bar - 1/8"-1/4"). Tube : Stainless steel Body : Brass. Seal : NBR, on request EPDM. Temperature : .-10°C…80 °C. Position : Normally Closed. Coil Voltage : 230V, 110V , 48V, 24V , 12V AC ; 110V , 48V , 24V , 12 V DC. Protection Class : IP65 and Exproof ...
Manufactured by:G.P.S Srl based inTerre di Reno (Fe), ITALY
SCRAP BALER FOR SCRAP METAL AND BODYWORK. The most powerful Shear Baler in its category, it ensures maximum efficiency in production, even with large quantities of scrap to be processed. A modern, versatile, hybrid Shear Baler, equipped with different options and configurationsto best adapt to any context. The cargo box has three powerful cylinders that generate an incredible power of 200 tonnes ...