- Home
- Equipment
Refine by
Gw Environmental Equipment & Supplies
110 equipment items found
Premium
Manufactured by:IMKO Micromodultechnik GmbH based inEttlingen, GERMANY
Measuring transducer for measuring moisture in continuous material flows and in places that are difficult to access, such as in tower dryers. Precise moisture measurement in heterogeneous bulk ...
Manufactured by:General Water Systems INC based inCorona, CALIFORNIA (USA)
Glass Filled polypropylene eductors that use a unique venturi design, allowing larger volumes of solution to ...
Manufactured by:Weihai Global Winner Technology Co., Ltd. based inWeihai City, CHINA
The whole structure is compact resistant and diving depth can reach 100M;It is easy to operate,you can use the thrusters to control the manipulator to move forward,backward,turn left and right,up and down to finish the precise grasp.It is widely used in the underwater search and salvage,underwater objects pickup,seafloor objects inspection and ...
Manufactured by:GWS Vacuum Equipment based inScunthorpe, UNITED KINGDOM
Suited to heavier products such as gravel or liquids, with a 3m³ capacity. Can be fitted with water tight ball valve or pinch ...
Manufactured by:GW Sprinkler A/S based inGlamsbjerg, DENMARK
This valve is designed to supply water at constant pressure to a wet automatic sprinkler system. It is typically used where zones with automatic sprinkles shall operate at a lower pressure than provided by the fire pump. The C-300 sprinkler valve has a built in non-return facility which prevents backflow if the valve inlet pressure suddenly drops. When the C-300 valve opens as caused by activated ...
Manufactured by:GW Sprinkler A/S based inGlamsbjerg, DENMARK
This valve is used where excessive uncontrolled pressure surges from the kick-in of fire pumps shall be avoided. The C-300 Pump Control valve is installed near the fire pump outlet, and is open in the stand-by position. When the fire pump starts, the full flow capacity of the C-300 Pump Control valve is discharged to drain. Immediately at pump start the C-300 valve pilot will monitor the pumped ...
Manufactured by:GW Sprinkler A/S based inGlamsbjerg, DENMARK
This valve is electrically actuated and provides pressure control. This valve is used where a constant downstream pressure and a controlled smooth opening and closing of the deluge water supply is called for. The valve's adjustable restrictors can be set to provide the opening- and closing speed desired, to prevent the damaging effects of reaction forces and water hammer. The valve is fitted with ...
Manufactured by:GW Sprinkler A/S based inGlamsbjerg, DENMARK
This valve is the simplest type in the GW C-300 range of deluge valves. It is fitted with a manifold block with strainer and restrictors facilitating customized setting of opening and closing speeds. This valve will work as an on/off valve only. Actuation of the valve can be obtained by fitting an actuator (manual, pneumatic, hydraulic or electric) to control the water release from the sleeve ...
Manufactured by:GW Sprinkler A/S based inGlamsbjerg, DENMARK
This valve is both electrically & pneumatically actuated and provides pressure control. This valve is used where a constant downstream pressure and a controlled smooth opening and closing of the deluge water supply is called for. The valve's adjustable restrictors can be set to provide the opening- and closing speed desired, to prevent the damaging effects of reaction forces and water hammer. ...
Manufactured by:GW Sprinkler A/S based inGlamsbjerg, DENMARK
This valve is used where a constant downstream pressure is required, irrespective of the fire pump pressure. The deluge valve is fitted with a pressure control pilot that constantly monitors the downstream pressure and modulates the C-300 valve elastomeric orifice to open and close and maintain the pre-set downstream ...
Manufactured by:General Water Systems INC based inCorona, CALIFORNIA (USA)
W100 Complete with:- Electrodeless sensor and manifold (Important because everyone else uses the cheaper contact style probe)- 1 each 4-20ma output- 4 output relays- 1 float switch and housing- 120 to 240 volt input- Mounted on backboardLarge display with icon based programming makes setup easy. Universal sensor input provides extraordinary flexibility; the same controller can be used with ...
Manufactured by:Global Water Services, LLC based inLisbon, IOWA (USA)
Custom Skid-Mounted Ultra Pure Water Systems. De-ionizer installation and tank exchange. Chlorine and Chloramine filter. UV Light Sterilization. Holding and Transfer ...
Manufactured by:General Water Systems INC based inCorona, CALIFORNIA (USA)
Motorized Ball Valve (Purge) 1" Stainless 85-240V AC-DC. Compatible with: 3" Separator and ...
Manufactured by:General Water Systems INC based inCorona, CALIFORNIA (USA)
Motorized Ball Valve (Purge) Fail Safe 1" Stainless 85-240V AC-DC. Compatible with: 3" Separator and ...
Manufactured by:General Water Systems INC based inCorona, CALIFORNIA (USA)
The 'MHC' Series water softener system is designed to effectively meet the rigorous demands of institutional and industrial facilities where high flow rates and hardness capacities are required. The standard, all-steel exterior design will be reliable for many years of service. A modular platform allows for single, twin, or triplex tank designs to be easily configured to meet the exact flow ...
Manufactured by:GW Sprinkler A/S based inGlamsbjerg, DENMARK
A full range of water control valves including butterfly (wafer and grooved), gate and ball types. Drain valves, test and drain valves and air release valves are also ...
Manufactured by:GWS Vacuum Equipment based inScunthorpe, UNITED KINGDOM
Exceptional vacuum performance with its own bin, perfect for tough or time-sensitive ...
Manufactured by:GWS Vacuum Equipment based inScunthorpe, UNITED KINGDOM
Keeping sites clean and healthy. Ideal for light, dry and dusty materials (e.g. powders, activated carbon, boiler dusts and incinerator ash) and designed to reduce airborne dust ...
Manufactured by:GW Sprinkler A/S based inGlamsbjerg, DENMARK
For the ease of CAD construction involving medium velocity GW Thermospray distribution patterns, the spray profiles for each nozzle spray angle are available as 3D models in STEP (.STP) file ...
Manufactured by:GW Sprinkler A/S based inGlamsbjerg, DENMARK
Technical Specification: RTI-Value: ~ 100 (metric). Weight: 66g (Brass). Thread: ½" BSPT (NPT. also available). Maximum Working Pressure: 12.5 Bar. System Test Pressure: 20 ...