- Home
- Equipment
Refine by
General Environmental Equipment & Supplies
257 equipment items found
Showcase
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
Belt-driven 3-lobe blower with discharge silencer free of absorption material and oilfree according to class 0. Extremely low noise levels, side-by-side installation and versatile adaptability. Available in 17 ...
Premium
Manufactured by:General Oceanics Inc. based inMiami, FLORIDA (USA)
The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1018 or 1015 Rosette multi-bottle array. Inert gas can be injected into bottle to force retrieved ...
Premium
Manufactured by:General Oceanics Inc. based inMiami, FLORIDA (USA)
The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1015 Rosette multibottle array, or with model AR1015 Acoustic Command Control. Inert gas can be ...
Premium
Manufactured by:General Oceanics Inc. based inMiami, FLORIDA (USA)
Equilibrator, Pre, Vent Assy. Flow Rate 2-3 L/m Pre equilibrator for our 8050 PCO2 ...
Premium
Manufactured by:General Oceanics Inc. based inMiami, FLORIDA (USA)
Kit, Relay Assembly for Intake pump PCO2 Optional relay to control an external water pump. The 8050 system includes a leak detection circuit that shuts off the water intake valve if a leak is detected inside the system. This switch would be used to turn off an external pump. Kit, Relay Assembly for Intake pump PCO2 Optional relay to control an external water pump. The 8050 system includes a leak ...
Premium
Manufactured by:General Oceanics Inc. based inMiami, FLORIDA (USA)
Kit, Flow Meter PCO2 This kit is used to calibrate the model 8050 ATM gas flow. Kit includes flow meter, fitting and tubing to connect to the vent of the ballast. This kit is used to calibrate the model 8050 ATM gas flow. Kit includes flow meter, fitting and tubing to connect to the vent of the ...
Premium
Manufactured by:General Oceanics Inc. based inMiami, FLORIDA (USA)
Polycarbonate body, polyetheylene syringe weight 1.0 lbs (.45kg). Length 21 inches (53cm) Dia 1.75 inches ...
Premium
Manufactured by:General Oceanics Inc. based inMiami, FLORIDA (USA)
The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1015 Rosette® multibottle array, or with model AR1015 Acoustic Command Control. Inert gas can ...
Premium
Manufactured by:General Oceanics Inc. based inMiami, FLORIDA (USA)
Model MLW1018 light weight small volume rosette (low pressure). Collection Bottle Size : ...
Premium
Manufactured by:General Oceanics Inc. based inMiami, FLORIDA (USA)
The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1015 ...
Premium
Manufactured by:General Oceanics Inc. based inMiami, FLORIDA (USA)
Mailing tube with end caps that holds two 4 oz. sample ...
Premium
Manufactured by:General Oceanics Inc. based inMiami, FLORIDA (USA)
The G.O. Intelligent Rosette system has a new and innovative bottle tripping mechanism. The trigger mechanism has been improved and simplified to allow continuous operation without the previously required alignment and adjustment. This coupled with the redesign lanyard loading and tripping mechanism allows for simple and positive ...
Premium
Manufactured by:General Oceanics Inc. based inMiami, FLORIDA (USA)
Block nylatron counterbalanced,1m, wide sheave sheave diameter .32m (12.5")bending radius .16m (6.26"). Light duty, wide sheave, load rating of 6,600 lbs. Bending radius 6.26" ...
Premium
Manufactured by:General Oceanics Inc. based inMiami, FLORIDA (USA)
A complete plankton net assembly consists of the net, mouth ring, cod end assembly and three-point bridle, and may also include a flowmeter and choker band. Start by selecting the net by mesh opening, then select between a cod end jar or bucket. Add on a flow meter and choker band if ...
Premium
Manufactured by:General Oceanics Inc. based inMiami, FLORIDA (USA)
The CSW-7 is an electric winch designed for use in oceanographic and geophysical research. This model is capable of lifting and lowering most small instrumentation payloads, while remaining light enough for four people to transport. It has a drum capacity of 1000 m of 0.25' cable. A slip ring adapter can be added to accommodate Mercotac slip rings or Klein sonar (modified Focal Technologies 180) ...
Premium
Manufactured by:General Oceanics Inc. based inMiami, FLORIDA (USA)
Niskin Water Sampling Bottles - Non-metallic free-flushing sampling bottles activated by GO Devil messenger (1000-MG) when individually or serially attached to hydrocable. Sequential closure by remote command with model 1015 Rosette. Niskin Water Sampler for 30 Liter Capacity. Weight empty 28Lbs (12.7kg) Length 46.4" ...
Premium
Manufactured by:General Oceanics Inc. based inMiami, FLORIDA (USA)
Model MLW1018 light weight small volume rosette (low pressure). Collection Bottle Size : ...
Premium
Manufactured by:General Oceanics Inc. based inMiami, FLORIDA (USA)
Kit, Gas Regulator PCO2 Kit includes four two stage high purity compact pressure regulators, with CGA 590 fittings (the user supplied gas standard cylinders must match the regulator fittings), and stainless steel tubing used for interfacing the standard gas bottles to the dry box, and to connect the dry box to the wet ...
Premium
Manufactured by:General Oceanics Inc. based inMiami, FLORIDA (USA)
4 Bolt Hub with 1" bushings, 5" axle tube (WOA: 5 1/4") with zerk, 4 - 1/2" studs with lock washers & nuts on 5" circle, 3 1/2" pilot hole. Weight: 3.50 ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
The Aerzen Turbo with air bearings, have exerted a major influence on technological progress. Particularly compact turbo package for medium and high volume flows. Lowest maintenance and noise emission, no vibrations and highest energy efficiency. Easy installation thanks to a plug-and-play package that integrates all ...