- Home
- Equipment
Refine by
Idm Environmental Equipment & Supplies
32 equipment items found
Manufactured by:Ingeniería De Medios del Pirineo S.L. (IDM) based inSABIÑÁNIGO (Huesca), SPAIN
The DET54 COMPACT PRETREATMENT is a compact plant designed and intended for the initial treatment of urban, industrial and waste water The objective of this pretreatment is to eliminate thick solids (sifting - sieving), sands (degritting) and fats (degreasing) from input flows of up to 500 ...
Manufactured by:IDM Instruments Pty Ltd. based inHallam, AUSTRALIA
The Page Pull Tester has been designed and manufactured to measure the strength required to pull pages out of bound books and magazines. The force is displayed on the digital read out; thus ensuring a quality bound book is provided to ...
Manufactured by:IDM Instruments Pty Ltd. based inHallam, AUSTRALIA
This fully automatic instrument can quickly and accurately assess air permeability of various materials such as woven fabrics, knitted fabrics, non-woven fabrics, industrial filter materials, as well as paper and foam ...
Manufactured by:IDM Instruments Pty Ltd. based inHallam, AUSTRALIA
The Swing Arm Clicker Press is useful for a wide variety of die cutting applications. The most common uses are cutting soft to semi-rigid materials. For example, gaskets, leather, cork, rubber, elastic, foam, and other like materials. All of these cutting presses are completely hydraulic. And also strong casting material to ensure powerful yet quiet running. The Clicker Press casting also ensures ...
Manufactured by:IDM Instruments Pty Ltd. based inHallam, AUSTRALIA
This instrument is used to determine the bending length of a cloth by means of a fixed angle flexometer and for calculating its flexural rigidity and bending modulus. These quantities are related to the stiffness of cloth. Applications: • All types of cloth except for those that twirl or twist excessively when cut into strips. Features: • Sliding scale • Adjustable levelling feet • Bench top ...
Manufactured by:IDM Instruments Pty Ltd. based inHallam, AUSTRALIA
Gelbo Flex Tester determines whether a certain plastic laminate material can withstand repetitive strain. It involves attaching sample pieces of plastic to the two circular clamping disks. This is via hose clamps. And then the machine twists and turns the specimen in specific movements. This process will show a visual result of pin holding. Thus, testing if the plastic can sustain the strain. If ...
Manufactured by:IDM Instruments Pty Ltd. based inHallam, AUSTRALIA
There are several different methods used in the mattress industry for the evaluation of innerspring and box spring mattresses. The Cornell Type Tester is used to test for firmness and firmness retention, the Mattress Rollator is used to test for durability and the Bedding Impact Tester is used to assess the effect of impact. The MRDT has been designed to determine the durability of any type of ...
Manufactured by:IDM Instruments Pty Ltd. based inHallam, AUSTRALIA
The machine consists of a 79.5 ± 1kg platen, which drops down and impacts the test specimen from various heights as selected by the operator. This allows comparison of results obtained by impacts from different heights. The Bedding Impact Tester has been designed and manufactured to perform various tests and evaluations of innerspring and boxspring mattresses, as well as foam mattresses, ...
Manufactured by:IDM Instruments Pty Ltd. based inHallam, AUSTRALIA
The Universal Testing Machine or the UTM is dual-testing machine can perform compression and tensile testing. The Universal testing machine enables measurement of firmness and harness. It is based on a physical property called the indentation force deflection (IFD). Which is calculated by determining the force required to deflect a test piece. Which is a percentage of its original thickness ...
Manufactured by:IDM Instruments Pty Ltd. based inHallam, AUSTRALIA
Coefficient of Friction Tester with Variable Speed & Heated Platen is the latest. This instrument ensures a fast, reliable, and accurate method of determining the coefficient of friction. Thus, the Coefficient of Friction Tester with Variable Speed & Heated Platen is most efficient. Our range of COF Testers is used to determine the static and kinetic friction. For materials like plastic ...
Manufactured by:IDM Instruments Pty Ltd. based inHallam, AUSTRALIA
The Coefficient of Friction Testers have proven to be a fast, reliable and accurate method of determining coefficient of friction. Our range of COF Testers are used to determine the static and kinetic friction of plastic film, sheeting, paper and other sheeted material coatings. Their small bench top design makes it easy to use in a laboratory or setup out on the production floor for offline ...
Manufactured by:IDM Instruments Pty Ltd. based inHallam, AUSTRALIA
The Pneumatic Sample Cutter allows the preparation of samples in various shapes. It cuts into circular or square or rectangle test pieces with uniform edges. It is pneumatic. Thus, ensures easy operation. It allows repetitious sample cutting. With the help of the ruler cutting dies, this machine can be used to produce samples for multiple ...
Manufactured by:Ingeniería De Medios del Pirineo S.L. (IDM) based inSABIÑÁNIGO (Huesca), SPAIN
The DET06R CIRCULAR CLARIFIER comprises a walkway that is supported twofold on the centre pivot and on the drive unit, whose raceway runs round the upper section of the exterior wall of the settling tank and features a peripheral drive. The circular clarifier allows a mechanical cleaning of all the sludge and the particles that are floating or in suspension which settle alone or with the help of ...
Manufactured by:Iteris, Inc. based inAustin, TEXAS (USA)
The IDM-M50 combines the power of Iteris Edge2 video detection processor and EdgeConnect communications module with the Siemens M50® NEMA Controller. This advanced module easily provides 64 channels of detection, eliminating the need for multiple Input/Output and Extension Modules, saving you money. ...
Manufactured by:Ingeniería De Medios del Pirineo S.L. (IDM) based inSABIÑÁNIGO (Huesca), SPAIN
The DET10 AERATION ROTOR / SURFACE AERATOR is an aeration unit, with a horizontal shaft, which turns parallel to the water surface. This unit is designed for the biological stages in waste water plants. Its purpose is to oxygenate the water and prevent possible sedimentation. This latter is achieved through the energy ...
Manufactured by:Ingeniería De Medios del Pirineo S.L. (IDM) based inSABIÑÁNIGO (Huesca), SPAIN
The DET05 AERATION TURBINE is suitable for waste water treatment and its purpose is to provide and spread oxygen through the body of liquid, in addition to stirring the sludge and preventing sedimentation at the bottom of the ...
Manufactured by:Ingeniería De Medios del Pirineo S.L. (IDM) based inSABIÑÁNIGO (Huesca), SPAIN
The DET21N Slurry Thickener is designed to be installed in circular enclosures. It is used to concentrate settled solids and clarify liquids. The slurry thickener essentially consists of a round tank with a tapered base and a slope towards that base. The mechanical units to pull the slurry towards the central cone down which it passes are mounted on the enclosure. Meanwhile the clarified water ...
Manufactured by:Ingeniería De Medios del Pirineo S.L. (IDM) based inSABIÑÁNIGO (Huesca), SPAIN
The DET15B CHAIN FILTER / CHAIN SIEVE is a unit intended to filter or sieve water in deep channels which may feature a significantly variable high flow rate. It is suitable for the retention of solids of between 150 microns and 6 mm. The chain sieve / chain filter is a single unit, which comes ready-made and tested from the factory which makes it far easier to install on site. Furthermore, its ...
Manufactured by:Ingeniería De Medios del Pirineo S.L. (IDM) based inSABIÑÁNIGO (Huesca), SPAIN
The DET53C COMPACTOR SCREW is a specially designed unit to transport and compact solid waste blocked by the Automatic Screens, Filtering Sieves, Rotating Sieves, ...
Manufactured by:IDM Instruments Pty Ltd. based inHallam, AUSTRALIA
Motorized Tension / Compression Test Stands - ESM1500 and ESM750 single-column force testers are highly configurable solutions for tension and compression measurement applications. With capacities of 1,500 lbF (6.7 kN) and 750 lbF (3.4 kN), respectively. With generous travel and clearance, they are suitable for break testing, cycling, limit testing to a load or distance, loadholding, elongation ...