- Home
- Equipment
Refine by
Ipes Environmental Equipment & Supplies
46 equipment items found
Manufactured by:IPS Corporation based inCompton, CALIFORNIA (USA)
Create quick access to important electrical, cable, and plumbing areas with the AB&A Plastic Access Panel. Available in a variety of sizes, this access door can be easily installed in both walls and ceilings. The frame mounts in place with adhesive sealant and may be anchored with fasteners for added security. This access unit has a white finish that allows it to exist inconspicuously on ...
Manufactured by:International Polymer Solutions Inc (IPS) based inIrvine, CALIFORNIA (USA)
IPS Air Cylinders are frequently used where splash-back or fumes from highly aggressive chemicals are prime considerations. Often used near corrosive chemicals these PVC, Polypropylene and PVDF cylinders are just the right answer for providing strength, durability and reliability in your severe service actuation ...
Manufactured by:International Polymer Solutions Inc (IPS) based inIrvine, CALIFORNIA (USA)
IPS Air Cylinders are frequently used where splash-back or fumes from highly aggressive chemicals are prime considerations. Often used near corrosive chemicals these PVC, Polypropylene and PVDF cylinders are just the right answer for providing strength, durability and reliability in your severe service actuation ...
Manufactured by:International Polymer Solutions Inc (IPS) based inIrvine, CALIFORNIA (USA)
Pressure Ratings: Performance at ambient room conditions: 120 psi for 1/16” fittings linear decreasing to 80 psi for 3/4” fittings and 60 psi for fittings larger than 3/4'. Performance at elevated temperatures up to 85 ºC/185 ºF: 90 psi for 1/16” fittings linear decreasing to 60 psi for 3/4” fittings and 40 psi for fittings larger than 3/4”. Contact factory ...
Manufactured by:International Polymer Solutions Inc (IPS) based inIrvine, CALIFORNIA (USA)
Pressure Ratings: Performance at ambient room conditions: 120 psi for 1/16” fittings linear decreasing to 80 psi for 3/4” fittings and 60 psi for fittings larger than 3/4'. Performance at elevated temperatures up to 85 ºC/185 ºF: 90 psi for 1/16” fittings linear decreasing to 60 psi for 3/4” fittings and 40 psi for fittings larger than 3/4”. Contact factory ...
Manufactured by:Inline Process Solutions (IPS) GmbH based inKaiserslautern, GERMANY
The SPRAY plug-in sensor is tailored for the inline monitoring of droplets, sprays, and minute particles in gases, compatible with various apparatus and wide pipework systems. It provides high-contrast and true-to-scale imagery even in environments with high gas velocities, allowing for precise particle detection concerning size and shape. The sensor delivers real-time data crucial for system ...
Manufactured by:International Polymer Solutions Inc (IPS) based inIrvine, CALIFORNIA (USA)
The IPS Precision Plug Valve (PPV) is a precision machined manual control valve manufac- tured from 100% virgin PTFE (all wetted surfaces) and PVDF Stem Nut. The PTFE body and stem perform equally well with harsh chemicals and ultra clean DI water. The basic construction is a single through orifice with a tapered body that matches the tapered plug for positive ...
Manufactured by:International Polymer Solutions Inc (IPS) based inIrvine, CALIFORNIA (USA)
The IPS PTFE Air & Liquid Aspirators are manufactured from virgin PTFE (PTFE - E.I. Dupont) and are designed for efficient and rapid siphoning of hard to handle chemicals. Our IPS Air Aspirator uses clean dry shop air (CDA) or Nitrogen to initiate and sustain a natural or forced siphon. Applications include the draining and mixing of containment vessels and the removal of saturated waste ...
Manufactured by:IPS Flow Systems based inSeaham, UNITED KINGDOM
Unplasticised Polyvinyl Chloride (PVC-U) is the most widely used of all plastics used for pipe installations. Is is rigid, versatile, and is suitable for both above and below ground ...
Manufactured by:IPS Flow Systems based inSeaham, UNITED KINGDOM
Polypropylene (PP) piping systems are widely used in industrial processing. Light in weight yet with high impact strength and reliable heat fusion welding, PP also offers good abrasion resistance and is a good thermal and electrical ...
Manufactured by:IPS Flow Systems based inSeaham, UNITED KINGDOM
Polyethylene is now in widespread use for industrial pipework systems, as well as for buried gas and water pipelines, where it is the dominant ...
Manufactured by:IPS Flow Systems based inSeaham, UNITED KINGDOM
Polyvinylidene Fluoride (PVDF) is a unique thermoplastic with properties which allow it to be used for very aggressive or highly specialised applications. Although expensive compared to other thermoplastics, PVDF offers an economically attractive alternative to many "exotic" materials and / or in process lines where limited working life of other materials necessitates frequent ...
Manufactured by:IPS Flow Systems based inSeaham, UNITED KINGDOM
Pressfit fittings are an established and cost effective way to install piping systems easily. With no threading, welding, or soldering to be done, the system provides tight leak free joints using a simple, portable press tool. Installed costs are lower than traditional methods, and the unique, "Leak on Test" seal design, ensures finished system ...
Manufactured by:International Polymer Solutions Inc (IPS) based inIrvine, CALIFORNIA (USA)
Our IPS Miniature Pneumatic Diaphragm Valves offer precision performance under extreme conditions. Offered as 2-Way and 3-Way Valves with six internal body configurations and three valve seat sealing methods, our IPS Miniature Pneumatic Diaphragm Valves are suitable for a wide range of ultra clean to highly corrosive media applications. Our all virgin PTFE wetted surface design is ideally suited ...
Manufactured by:International Polymer Solutions Inc (IPS) based inIrvine, CALIFORNIA (USA)
IPS PVC Drain Valve (DV) is a large orifice valve capable of handling large volumes of corrosive fluids via an all non-metallic wetted surface. For cost efficiency this valve is fabricated from PVC and is available with EPDM and Viton O-rings. This valve is also available in 2, 3 and 4 way configurations with each port operating independently. The “DV” can be operated either by air ...
Manufactured by:International Power Supply AD (IPS) based inSofia, BULGARIA
Ultra compact, only 2 kg, plug & play as well as hot pluggable, the CXP-40 is the most powerful switched mode CP controller with several features. The most important is the ability for remote monitoring an control of the output current and voltage. XCP-40 can perform periodical battery capacity and health checks. The best advantage is the system N+1 redundancy. Do to the fact that the ...
Manufactured by:ESP Safety, Inc. based inHouston, TEXAS (USA)
ESP Safety’s Model IPES-IR/UV Flame Detector provides superior sensitivity for fires from oil and petrochemical products. It is also indicated for a wide range of other fire types including metal fires. IPES-IR/UV’s advanced detection technology includes optical filters configured for maximum sensitivity to radiation produced by flame or fire and ensures rapid flame recognition and ...
Manufactured by:ESP Safety, Inc. based inHouston, TEXAS (USA)
ESP Safety’s Model IPES-UV Flame Detector is optimally suited for use in detecting fires of metal and pyrophoric materials. It is also ideally suited for areas where modulated infrared radiation may be present, such as hot spots on rotating electrical equipment. IPES-UV’s advanced detection technology ensures rapid flame recognition and alarm signaling. The device is configured for ...
Manufactured by:International Polymer Solutions Inc (IPS) based inIrvine, CALIFORNIA (USA)
Our IPS PTFE Pneumatic Valve (TP Valve) features an all PTFE wetted surface design. The design is ideally suited for harsh chemical and corrosive media and environments. Polytetrafluoroethylene (PTFE), commonly known by its popular E.I. DuPont trade name PTFE, is well suited to clean room and deionized water ...
by:Industrial Pollution Equipment Advisor (IPE Advisor) based in, MICHIGAN (USA)
Industrial Pollution Equipment Advisor (IPE Advisor) provides free engineering advice and free online engineering tools to helps plant managers, engineers, and buyers determine the right air pollution equipment for their application and find suppliers with experience in their industry. Whether the customer needs a thermal oxidizer, RTO, direct-fired oxidizer, or catalytic oxidizer - we can ...