- Home
- Equipment
Refine by
Kds Environmental Equipment & Supplies
43 equipment items found
Manufactured by:KD International B.V. based inAmstelveen, NETHERLANDS
The SERIES FS620 filtration skids are designed to filter particulate from liquids and in addition can be converted to remove hydrocarbons from liquids by using KD’s world’s leading granular Absorption Media Cartridges for the removal of total petroleum hydrocarbons from water. The Dual Vessel Absorption cartridge units are designed to be a portable complete filtration system and can ...
Manufactured by:KD International B.V. based inAmstelveen, NETHERLANDS
Oil and Gas waste water includes small amounts of free or dissolved hydrocarbons and solids that must be removed before the water can be re-used, injected or discharged. The level of removal (particularly for hydrocarbons) and disposal options are typically specified by the client. Treatment to remove dispersed hydrocarbons in the form of oil droplets from water relies on gravity separation, with ...
Manufactured by:KD Scientific based inHolliston, MASSACHUSETTS (USA)
Activate two KDS 100 pumps simultaneously with one push of the start key. Set each pump with a different flow rate and the pumps will infuse at the same time. The system includes two KDS 100 pumps and the cable to link the pumps together. The two pumps can also be operated as standard independent KDS ...
Manufactured by:KD Scientific based inHolliston, MASSACHUSETTS (USA)
Sequential volume dispensing is easy with the new volume dispensing system. The system includes two KDS 100 pumps and the cable to link the pumps together. Set the same or different volume[s] in pump A and B; pump A will dispense the predetermined volume and start pump B automatically. Pump A and B can have unique flow rates. The two pumps can also be operated as standard independent KDS ...
Manufactured by:Kendensha Co. Ltd. based inShimane, JAPAN
Two-stage screw shaft mechanism enables even higher dehydration rate. Stable Operation; A thorough squeeze of sludge is achieved by fine adjustment to the sludge properties. By eliminating a back pressure plate, leakage and blockage of dehydrated(dewatered) cake hardly ...
Manufactured by:KD Group based inVejle, DENMARK
The Shartless Screw Conveyor and Compactor is offered in four different sizes, with capacities from 1 to 8 cubic metres per hour. These augers are specifically designed to handle screenings where an efficient separation of water and solids is essential. Constructed from stainless steel and carefully machined for optimal durability, the auger maintains exceptional quality and performance. The ...
Manufactured by:KD Group based inVejle, DENMARK
With a choice of five different sizes, our KD 01 Grit Classifier offers an impressive separation capacity ranging from 20 to 140 m3 per hour. This advanced system is constructed from stainless steel that undergoes meticulous total pickling, guaranteeing exceptional durability and longevity. With simple and robust design features, our Grit Classifier operate at low speed, which not only minimises ...
Manufactured by:KD Group based inVejle, DENMARK
The KD 07 Gravity Belt Thickener form a dedicated series of pre-drainers specifically designed for mounting on the KD 10, 11 and KD 13 belt presses. Although the pre-waterer is primarily adapted to these belt press models, it can also be supplied as an autonomous unit that works independently. This pre-waterer is constructed on a hot-dip galvanised steel frame that is tailor-made to fit the belt ...
Manufactured by:KD Group based inVejle, DENMARK
The KD 10 - 1500/- 2500 Belt Press Hydraulic (HY) represent a new generation of advanced compactors designed and manufactured by Danish Wastewater Equipment A/S. These balers are quality, high-tech products created to achieve the highest possible dry matter concentration, even in challenging conditions with difficult to dewater sludge. The development of the belt presses is the result of close ...
Manufactured by:KD Scientific based inHolliston, MASSACHUSETTS (USA)
The KDS270 can hold up to four syringes and can cycle continuously back and forth in a push-pull action. As two syringes are infusing, two syringes are withdrawing at the same rate. At the end of the set volume the direction is automatically reversed and the next cycle begins. With the use of 3-way valves the pump can empty and refill syringes for a continuous ...
Manufactured by:KD Scientific based inHolliston, MASSACHUSETTS (USA)
The NEW KDS Gemini 88. This unique pump is really two pumps in one. Each side of the Gemini 88 has its own syringe rack, motor and leadscrew. The pump can infuse simultaneously at different rates, or infuse with one syringe and withdraw with the other. When combined with a valve box it provides continuous ...
Manufactured by:KD Scientific based inHolliston, MASSACHUSETTS (USA)
Infuse only single syringe pump. Accommodates syringes from 0.5ul to 60ml. User definable flow rates with selectable target volume or time values to control the total infusion ...
Manufactured by:KD Scientific based inHolliston, MASSACHUSETTS (USA)
Infuse only dual syringe pump. Accommodates syringes 0.5 µl to 10 ml. User definable flow rates with selectable target volume or time values to control the total infusion ...
Manufactured by:KD Scientific based inHolliston, MASSACHUSETTS (USA)
Infuse only dual syringe pump. Accomodates 2 syringes. User definable flow rates with selectable target volume or time values to control the total infusion ...
Manufactured by:KD Scientific based inHolliston, MASSACHUSETTS (USA)
Infuse/withdraw Syringe pumps. Accomodates 2 syringes. The Legato 210™ supports infuse only, withdraw only, infuse/withdraw, withdraw/infuse and continuous mode. User definable flow rates with selectable target volume or time values to control the total infusion ...
Manufactured by:KD Scientific based inHolliston, MASSACHUSETTS (USA)
Single syringe infuse/withdraw optimized for low flow with program options for 2 programs. 50 steps each. Accommodates syringes 0.5 µl to 60 ml. User definable flow rates with selectable target volume or time values to control the total infusion ...
Manufactured by:KD Scientific based inHolliston, MASSACHUSETTS (USA)
Push-Pull syringe pump. Accommodate two syringes for infusion and two syringes for withdrawal. These models support infusion and withdrawal simultaneously at user defined flow rates and with selectable target volumes to control the total volume pumped. They also support infuse only, withdraw only, infuse/withdraw/ withdraw/infuse and continuous mode, user-defined flow rates with selectable target ...
Manufactured by:KD Group based inVejle, DENMARK
The KD 09 screenings press is used for efficient pressing of screenings and similar material, either after coarse or fine screening. The material is fed to the screenings press either through a KD 02 screw conveyor or via a pipework system. This press is available in five different sizes with capacities from 1 to 6 cubic metres per hour. The screenings press ensures a high dry matter percentage ...
Manufactured by:KD International B.V. based inAmstelveen, NETHERLANDS
KD’s advanced sludge separator performed a very useful function in oil & gas field for removing solids from fluids without using energy or using rotating parts. Due to the unique design large sludge particles would settle and could be removed from the process fluid by a dedicated drain system. The bottom of the system should be sloped to facilitate optimal functioning and self cleaning. ...
Manufactured by:KD Group based inVejle, DENMARK
KD 02 augers are available in six different sizes, tailored to the desired capacity for the transport requirement. In addition to these standard sizes, the shaftless screw conveyor can be customised to meet specific customer requirements in the following areas: Length, potential increases, inlet/outlet configurations (type/dimension), inlet position (customisation). These augers are particularly ...