- Home
- Equipment
Refine by
Kalenborn Environmental Equipment & Supplies
13 equipment items found
Manufactured by:Kalenborn Kalprotect GmbH & Co. KG based inVettelschoss, GERMANY
We use silicon carbide ceramics for plant components which are subject to not only extreme abrasive wear but also high temperatures or stresses due to temperature fluctuations. KALSICA is available in various quality grades depending on where it is used. Typical applications include coal dust distributors, cyclone linings and coke ramps. High-precision custom components, even for complex ...
Manufactured by:Kalenborn Kalprotect GmbH & Co. KG based inVettelschoss, GERMANY
KALOCER is an oxide ceramic material composed of more than 90% aluminium oxide. It is manufactured as plates, specially shaped components and cylinders. KALOCER is suitable for plant components subject to extreme amounts of abrasive wear. Linings from as little as 1.5 mm thick even open up the possibility of use in highly constricted spaces. KALOCER is suitable for all segments, particularly the ...
Manufactured by:Kalenborn Abresist Corporation based inUrbana, INDIANA (USA)
The wear-resistant KALFLEX hoses are used where flexible radius and angle design is required. They are suitable for transporting very abrasive materials such as granules, quartz sand, sludge, lime powder, or coal dust. This way you avoid maintenance stops and hose changes. ALFLEX are flexible elbows that can be easily installed with normal flanges. The core of the system consists of ...
Manufactured by:Kalenborn Abresist Corporation based inUrbana, INDIANA (USA)
For critical cases, Kalenborn has systems in its program for plant components that indicate the possible wear of the protective lining and thus give the operator the information to act at an early stage. Indicator stones at different heights are integrated in a ceramic anti-wear lining or lining with a hard material compound. With increasing wear, the indicator stones become visible one ...
Manufactured by:Kalenborn Abresist Corporation based inUrbana, INDIANA (USA)
Wear-resistant KALCOR pipe systems are abrasion-resistant and enable application temperatures of up to + 400 °C as well as good temperature change resistance. The cast tubular cylinders are made of zirconium corundum with thin wall thicknesses starting from 12 mm. Kalenborn also produces lined pipe bends from ...
Manufactured by:Kalenborn Abresist Corporation based inUrbana, INDIANA (USA)
Green pipes and pipe elbows have a wear-resistant lining that can be dismantled and recycled at the end of their life. A special fastening concept for the wear protection lining enables the old lining to be dismantled without destroying the steel jacket. The existing steel pipes are then relined with new material ...
Manufactured by:Kalenborn Abresist Corporation based inUrbana, INDIANA (USA)
Fused basalt ABRESIST has proven to be an excellent protective lining in pipes and pipe bends. In both pneumatic and hydraulic delivery lines, wear is significantly minimized by built-in tubular cylinders. ABRESIST pipes and pipe bends have an extremely smooth surface after a short period of operation, thereby avoiding blockages caused by moist materials. Due to the corrosion resistance of ...
Manufactured by:Kalenborn Abresist Corporation based inUrbana, INDIANA (USA)
KALOCER pipes and pipe bends are lined with thin pipe cylinders made of special oxide ceramics and designed for extreme wear and/or temperature stress. The permanently smooth surfaces promote flow behavior and avoid blockages caused by moist materials. Due to their corrosion resistance, KALOCER pipes and pipe bends always remain ready for use even after long periods of downtime. Depending on ...
Manufactured by:Kalenborn Abresist Corporation based inUrbana, INDIANA (USA)
KALPOXY TWC is a two-part trowelable epoxy repair compound containing 50%, by volume, sapphire hard (9 mohs) alumina ceramic beads (Al2O3) and silicon carbide particles. Easy to mix and apply, the thixotropic paste is self-curing. KALPOXY TWC can be used as a protective coating or to repair worn areas in material handling equipment or components conveying abrasive ...
Manufactured by:Kalenborn Abresist Corporation based inUrbana, INDIANA (USA)
KALBOND high-performance adhesive bonding system is custom engineered for specific applications, providing superior adhesion and strength. It permits the bonding of engineered KALOCER protective linings to components used in dynamic situations and subject to abrasion and corrosion. KALBOND® helps extend the service life of moving parts such as fan blades, classifier rotors, screw augers and ...
Manufactured by:Kalenborn Kalprotect GmbH & Co. KG based inVettelschoss, GERMANY
ABRESIST fused cast basalt has proven extremely effective as a protective lining in straight pipe elements and in pipe bends. Installed pipe cylinders reduce wear significantly in both pneumatic and hydraulic conveyor ...
Manufactured by:Kalenborn Kalprotect GmbH & Co. KG based inVettelschoss, GERMANY
KALOCER pipes and pipe bends are lined with thin pipe cylinders made of special oxide ceramic and designed to withstand extreme wear and/or temperature stresses. The durably smooth surfaces promote flowability and prevent moist material from forming blockages. Its corrosion resistance ensures that KALOCER pipes and pipe bends are always ready for use, even after extended downtimes. ...
Manufactured by:Kalenborn Kalprotect GmbH & Co. KG based inVettelschoss, GERMANY
Pneumatic and hydraulic conveying operations and dust removal subject pipe and channel elements to heavy wear. Making the associated components out of KALMETALL significantly extends their service life. The KALMETALL brand designates a range of hard-faced steel systems comprising a tough basic shell with hard-face welding. The basic material of the systems is the reinforcement substrate. It ...