- Home
- Equipment
Refine by
Lakeside Environmental Equipment & Supplies
19 equipment items found
Manufactured by:Lakeside Manufacturing, Inc. based inMilwaukee, WISCONSIN (USA)
Waste and Recycling Stations combine attractive functionality with the durability of stainless steel. Waste & Recycling Stations combine attractive functionality with the durability of stainless steel. Solid stainless steel floor prevents floor ...
Manufactured by:Lakeside Manufacturing, Inc. based inMilwaukee, WISCONSIN (USA)
Waste and Recycling Stations combine attractive functionality with the durability of stainless steel. Waste & Recycling Stations combine attractive functionality with the durability of stainless steel. Solid stainless steel floor prevents floor spills. ...
Manufactured by:Lakeside Manufacturing, Inc. based inMilwaukee, WISCONSIN (USA)
Lakeside’s classic case cart systems are highly configurable and designed for durability. Lakeside 6930 stainless steel case cart includes one door and one pull-out stainless wire shelf. Internal dimensions are 36″ W x 29″ D x 39″ H and the shelf width is 24″. Pitched floors with integrated floor drains make drying easier and limits pooling. Doors open 270-degrees ...
Manufactured by:Lakeside Equipment Corporation based inBartlett, ILLINOIS (USA)
Clean bar screens, trash racks and intake screens at wastewater treatment plants, storm water facilities and water intake structures with Hydronic T Series Trash Rake. Telescoping designs are available with single and multiple sections to fit your operational needs. Since the rake mechanism is independent from the bar rack, the Hydronic T Rake does not require guides, sprockets or chains and has ...
Manufactured by:Lakeside Equipment Corporation based inBartlett, ILLINOIS (USA)
Enclosed Screw Pumps provide the same pumping capability as Open Screw Pumps but are encased within a tube rather than sitting in an open trough. Lakeside Equipment is the only manufacturer who offers two different types of Enclosed Screw ...
Manufactured by:Lakeside Equipment Corporation based inBartlett, ILLINOIS (USA)
Unlike conventional bar screens, the RaptorFine Screen’s characteristic cylindrical screenings basket, angled installation and screen bars of varied heights increase removal efficiency and minimize headloss. The Raptor® Fine Screen’s rotating rake teeth fully penetrates the cylindrical screen bars, positively removing debris and grease to prevent blinding or plugging. Captured ...
Manufactured by:Lakeside Equipment Corporation based inBartlett, ILLINOIS (USA)
Ideal for small treatment facilities, theRaptor Micro Strainer is a screen with a semi-circular basket with small apertures ranging from 0.04 to 0.25-inches (1 to 6 mm). It captures small debris that passes through other screens. A perforated plate or wedge wire basket is available for municipal or industrial applications. The captured screenings are washed, compacted, and dewatered to a dry ...
Manufactured by:Lakeside Equipment Corporation based inBartlett, ILLINOIS (USA)
An excellent screenings solution for applications requiring removal of small particles, the Raptor® Rotating Drum Screen’s high removal efficiency meets the needs of Membrane Biological Reactor (MBR) designs. Using either a perforated plate or wedge wire basket with openings ranging from 0.02 to 0.25-inches (0.5 to 6 mm) this screen is ideal for either municipal or industrial ...
Manufactured by:Lakeside Equipment Corporation based inBartlett, ILLINOIS (USA)
Remove debris and inorganic solids from septage tanks, grease traps, sludge, leachate and industrial waste with the fully automated Raptor Septage Acceptance Plant (SAP). The heart of the SAP is the Raptor Fine Screen, which compacts and dewaters the captured screenings to a solids content of 40 percent. The screen’s rotating rake teeth fully penetrates the cylindrical screen bars, which ...
Manufactured by:Lakeside Petroleum Service LLC. based inSyracuse, NEW YORK (USA)
PureFuels Eco Filtration Monitor (EFM) is a compact controller designed specifically for fuel polishing systems. Also the EFM has 16 programmable set points. With each set-point, it can be programmed for either one or up to seven days a week. The EFM monitors the main storage tank for a low level condition, the containment leak sensor, The filter differential ” filter needs replacing” ...
Manufactured by:Lakeside Equipment Corporation based inBartlett, ILLINOIS (USA)
The Aeroductor grit chamber effectively removes inorganic grit from the influent flow in a controlled, aerated environment. Air is injected into the grit chamber, circulating the contents and causing lighter organics to remain in suspension while heavier grit is scoured, washed and collected at the bottom of the tank. Settled grit is periodically removed by an airlift pump. The air-grit slurry ...
Manufactured by:Lakeside Equipment Corporation based inBartlett, ILLINOIS (USA)
Combining screening and grit removal into one self-contained unit, theRaptor Complete Plant is a unique system for treating municipal wastewater or septage receiving applications. The fully automated unit is capable of handling peak flow rates up to 4.0 mgd. It is supplied in a pre-engineered stainless steel tank and equipped with theRaptor Screening product line (screening, washing, compacting, ...
Manufactured by:Lakeside Petroleum Service LLC. based inSyracuse, NEW YORK (USA)
7 or 15 gallon (26.49 liter) capacity. Vented and Weatherproof. Hinged door is lockable with a key. Drain located bottom back center. Available with hand pump, ball valve, quick disconnect check valve coupler/adaptor, dry disconnect adaptor, and dust cap/plug in 2″ or 3″ configurations. All connection assemblies are factory installed and tested prior to ...
Manufactured by:Lakeside Equipment Corporation based inBartlett, ILLINOIS (USA)
Clean bar racks up to a depth of 100 feet with the hydraulically operated Hydronic K Series Trash Rake. The articulating design gives the rake arm a long reach suitable for manual surface skimming and removing large objects, such as trees, barrels and rootstocks. It is available as a stationary, swiveling or traversing unit providing the right fit for your ...
Manufactured by:Lakeside Equipment Corporation based inBartlett, ILLINOIS (USA)
The open screw pump consists of a spiral screw, upper and lower bearings and a drive assembly. It pumps liquid in a semi-circular open trough permitting both simplicity and reliability. These screw pumps can be placed in either concrete or steel troughs at an angle of inclination ranging from 22 to 40 degrees. The screw pump’s sealed lower bearing can be designed with a long lasting sleeve ...
Manufactured by:Lakeside Equipment Corporation based inBartlett, ILLINOIS (USA)
Remove debris and inorganic solids from septage tanks, grease traps, leachate and industrial waste with the fully automated Raptor Septage Acceptance Plant (SAP). The heart of the SAP is the Raptor Fine Screen, which compacts and dewaters the captured screenings to a solids content of 40 percent. The screen’s rotating rake teeth fully penetrates the cylindrical screen bars, which prevents ...
Manufactured by:Lakeside Manufacturing, Inc. based inMilwaukee, WISCONSIN (USA)
Lakeside’s classic case cart systems are highly configurable and designed for durability. Lakeside 6950P stainless steel case cart includes two doors and two pull-out perforated stainless shelves. Internal dimensions are 43″ W x 29″ D x 39″ H and the shelf width is 13 1/2″. Pitched floors with integrated floor drains make drying easier and limits pooling. Doors open ...
Manufactured by:Lakeside Equipment Corporation based inBartlett, ILLINOIS (USA)
Efficiently remove inorganic grit from the treatment plant in a mechanically induced vortex environment. The SpiraGrit® efficiently removes grit over a wide range of daily flow rates. Rotating paddles maintain the flow velocity in the vortex chamber, keeping organics in suspension while allowing heavier grit to settle on the chamber floor. The settled grit moves across the floor and falls ...
Manufactured by:Lakeside Petroleum Service LLC. based inSyracuse, NEW YORK (USA)
One systems for the entire facility monitoring and controlling your complete fueling systems. Commander Fuel Oil Controller system monitors tank levels and supplies pump controls for automatic fuel transfers for applications requiring day tanks and institutional boilers. The Smart Controls intelligently integrates all the components of the fueling system in to one simple automated package. ...