- Home
- Equipment
Refine by
Mas Grup Environmental Equipment & Supplies
6 equipment items found
Manufactured by:MAS DAF MAKINA SAN. A.S. based inAydinli, TURKEY
Main dimensions, compatible with EN 733 (DIN 24255) norm. A total of 48 designed pumps available in the series. Single suction with closed impeller, and thrust balanced by means of counter-balancing holes and back wear rings, thus acquiring a dynamic balance. The pump and the motor have a standard connection to the common base plate with a flexible coupling. Maintenance and repair procedures are ...
Manufactured by:MAS DAF MAKINA SAN. A.S. based inAydinli, TURKEY
CPM type consists of horizontal suction, vertical discharge flange, single stage volute pumps. Open impellers compatible with DIN 24 256 and TS-EN 22 858 standards are used. Suction and discharge flanges are compatible with the DIN 2533 standards. Fully radial and open wing impellers are dynamically balanced. Thrust is balanced by back vanes. Because the shaft diameter is resistant to bending due ...
Manufactured by:MAS DAF MAKINA SAN. A.S. based inAydinli, TURKEY
Single stage, end suction centrifugal pumps. Main pump dimensions are compatible with DIN 24256 (ISO 2858). Single entry, closed type impeller is used. Radial vanes are used behind the impellers to lower the pressure and to balance the thrust (axial force). The pump and the motor are connected by means of a flexible coupling on a common base plate. Maintenance of the pump is very easy. The shaft ...
Manufactured by:MAS DAF MAKINA SAN. A.S. based inAydinli, TURKEY
The DS - DB - DM - DMA - DMB - DM65 type booster pumps consist of single, multistage, vertical shaft centrifugal pumps which are not of self-priming type. The boosters can be operated automatically or manually. The boosters should be operated automatically unless necessary otherwise. Level floaters of the booster set prevent the pump from functioning without water. The pump and the motor are ...
Manufactured by:MAS DAF MAKINA SAN. A.S. based inAydinli, TURKEY
These are end suction, single stage centrifugal pumps. These three pumps, YNM 525, YNM 825 and YNM 1531 are used for flow rates ranging between 50 and 1250 gpm. The main pump dimensions are compatible with DIN 24256. The pump flanges are designed according to UL standards ANS/ASME B16.1 Class 250. The pump performances are compatible with UL and FM standards. The single suction, closed type ...
Manufactured by:MAS DAF MAKINA SAN. A.S. based inAydinli, TURKEY
Thanks to magnetic couplings which are used in NM m-Drive series pumps, zero leakage is provided. Outer magnetic rotor is rotated by motor shaft and inner magnetic rotor is rotated synchronously to outer magnetic rotor by magnetic forces without any physical contact. Inside of the pump is isolated from environment by containment shroud and zero leakage is ...