- Home
- Equipment
Refine by
Marsh Environmental Equipment & Supplies
15 equipment items found
Manufactured by:Marsh Bellofram based inNewell, WEST VIRGINIA (USA)
The Marsh Bellofram Type 1000 is an electro-pneumatic transducer that reduces a supply pressure to a regulated output pressure directly proportional to a converted electrical input signal. The Type 1000 accepts a wide range of supply pressures, ranging from a minimum of 3 psig (0.2 BAR) above the maximum output up to 100 psig (6.9 BAR). An integral pneumatic volume booster provides high flow ...
Manufactured by:Marsh Bellofram based inNewell, WEST VIRGINIA (USA)
The Bellofram T39 regulator selection is the largest of its type in the industry. We offer this regulator in three different materials, one of which will ideally suit your application AND your budget. ALL of the T39 regulators are offered with six different spring ranges. Our broad selection of outlet pressure spring ranges allows more precise regulation of downstream pressure, hence, better ...
Manufactured by:Marsh Instruments based inKennesaw, GEORGIA (US) (USA)
In addition to our standard Thermowells, Marsh Instruments offers custom Thermowells. Configurations include, but are not limited to flanged, weld-in, sanitary/clamp-in, and more. Marsh Instruments Thermowells can be offered in custom sizes, lengths, bore diameters, and shank configurations as well as a variety of materials to ensure chemical compatibility with corrosive media. Marsh Instruments ...
Manufactured by:Spectra Scientific, Inc. based inMississauga, ONTARIO (CANADA)
The Marsh McBirney FloMate 2000 is a portable water velocity meter used to measure water velocity in streams, sewers, irrigations channels. Spectra Scientific offers the FloMate with a telescoping extension ...
Manufactured by:Marsh Instruments based inKennesaw, GEORGIA (US) (USA)
The General Service Steel Case Gauge from Marsh Instruments is a family of cost-effective, general purpose instruments designed for reliable pressure measurements. Suitable for use with water, oil, air, gas or other noncorrosive media from vacuum/compound through 5,000 ...
Manufactured by:Marsh Instruments based inKennesaw, GEORGIA (US) (USA)
Marsh Instruments Quality Gauges feature the exclusive recalibrator and the accuracy is within ±1” in the middle half of span. These gauges provide continuous service at an economical ...
Manufactured by:Ekotank Liquid Storage Systems based inIstanbul, TURKEY
Ekotank Mars® is designed to be a cost effective alternative to the Apollo® series. This model fills an important gap in the field where budget is the most important criteria in a project. All Ekotank® models are produced based on the same high quality standards and have the same set of certifications. Ekotank Mars® have 4 optional soft cover solutions to fill the needs of the ...
Manufactured by:Marsh Instruments based inKennesaw, GEORGIA (US) (USA)
The Model 13000 Mini Welded Seal is designed for up to 3 1/2” bourdon tube gauges with aminimum range of 0-60 psi. The maximum operating pressure is 2,500 psi at 100˚F. Available inall 316 Stainless Steel or Hastelloy C process housing and ...
Manufactured by:Mantair Ltd based inFrinton-on-Sea, UNITED KINGDOM
We are a Marsh Industries approved installer. The Marsh range of sewage treatment plants provide a discreet, reliable and affordable solution to sewage treatment for domestic dwellings and commercial premises without access to mains drainage. Providing a safe environment for the collection and treatment of waste water, the Marsh range of sewage treatment plant produces a clear, odourless ...
Manufactured by:Marsh Bellofram based inNewell, WEST VIRGINIA (USA)
The Type 37 regulator is specifically designed for applications that require large flow capability and accurate pressure control. This regulator offers low droop, high accuracy, and fine adjustment sensitivity. The use of a Bellofram rolling diaphragm provides greater sensitivity and improved accuracy. The Type 37 offers a balanced pintle,which minimizes output pressure changes caused by ...
Manufactured by:Marsh Bellofram based inNewell, WEST VIRGINIA (USA)
The Marsh Bellofram Type 10 Air Pressure Regulator is designed to control output pressure with accuracy of 0.1% and high-repeatability, with very low sensitivity to changes in supply pressure, ambient temperature and ...
Manufactured by:Marsh Bellofram based inNewell, WEST VIRGINIA (USA)
Marsh Bellofram diaphragm Air Cylinders are actuators made from elastomers, engineered metals and fabrics. They require no lubrication and are virtually frictionless and economical. They can be used to provide lifting, clamping, pushing, coining, turning and other linear force or actuation motions in many ...
Manufactured by:Marsh Instruments based inKennesaw, GEORGIA (US) (USA)
Marsh Instruments Digital Pocket Thermometers have a 3.5 digit LCD display, ABS case, and a 304 stainless steel 5” long stem. The accuracy is 2F with an update time of 10 seconds. Each unit has an on-off switch for longer battery life and comes with the protective carrying ...
Manufactured by:CETCO based inNew York, NEW YORK (USA)
Viscosity is a measurement of a fluids resistance to flow: the greater the resistance, the higher the viscosity. As measured by the MARSH FUNNEL, the viscosity of the fluid in question is influenced by the density of the fluid (solids content) and gelation rate (beneficiated solids content). The viscosity of the drilling fluid in use should be based on a combination of the following parameters: ...
Manufactured by:Marsh Bellofram based inNewell, WEST VIRGINIA (USA)
Marsh Differential Pressure Gauges measure the difference between two pressures in a system. This comparison allows the user to tell whether or not the equipment is functioning properly. Diaphragm Type DP Gauges allow no migration of process media from high to low ...