- Home
- Equipment
Refine by
Moldow Environmental Equipment & Supplies
8 equipment items found
Manufactured by:Moldow A/S based inHolsted, DENMARK
Energy Efficient Chain Conveyor System: The Moldow Chain Conveyor System is an environmentally friendly and energy saving solution for horizontal or vertical transport of chips from the filter to e.g. a silo. The system is an alternative to the traditional Pneumatic transfer system and it uses only about 1/10 of the energy that a pneumatic system uses. The chain conveyor system is built up of ...
Manufactured by:Moldow A/S based inHolsted, DENMARK
Most Popular Baghouse Filter: Moldow’s MHL filter, “Moldow High Load”, is a modular baghouse filter designed for air volumes ranging from approx. 20,000 to 250,000 m³/h (11,500 and 150,000 CFM) and continuous operation, 24 hours a day, 7 days a week. It is no doubt our most popular filter system due to the high capacity and easy expansion and adaptation. The MHL filter can ...
Manufactured by:Moldow A/S based inHolsted, DENMARK
Cylones for use in Dust Extraction Systems for Dust Separation: For cyclonic separation of coarse material from the air before it reaches the dust collector and filtering unit, a cyclone can be used. The metal construction and cyclonic filtering action allow for the safe separation of all materials even those which are very course or sharp which otherwise might damage typical cloth filters. ...
Manufactured by:Moldow A/S based inHolsted, DENMARK
The Transflow system can be a great advantage for production facilities within the woodworking industry with large amounts of extraction material as it allows for handling of large dust loads and flexible machinery placement and connection. As the waste material enters the Transflow, the airspeed is greatly reduced due to the plenum design. This forces all but the finest particles to fall out of ...
Manufactured by:Moldow A/S based inHolsted, DENMARK
The SB filter is an efficient filter suited for positive operation and air volumes from 5,000 to 175,000 m³/h (3,000 to 100,000 CFM) depending on how the filter is constructed and the waste type and volume. The filter is an enclosed, modular bag filter for outdoor installation either on roofs, above waste containers or at ground level outside the ...
Manufactured by:Moldow A/S based inHolsted, DENMARK
Moldow has installed a large number of extraction systems which utilize dilute pneumatic conveying principles. A Dilute Pneumatic conveyor is established using traditional round ducting and fans. The system can be used to transport waste from the filter unit to a silo or container. Since the system uses air to transport waste, there are limits to the amount of waste which can be transported. ...
Manufactured by:Moldow A/S based inHolsted, DENMARK
The MX filter is a reliable, modular designed bag filter for continuous operation and intended for both positive and negative pressure systems. The dust collector is used within the fiber industry for production facilities handling e.g. mineral wool, spun glass, cellulose fibers and non-woven fabrics, and within the woodworking, paper, printing and cardboard industries where large amounts of ...
Manufactured by:Moldow A/S based inHolsted, DENMARK
Contrary to the RS-EXL valves, the RS-EXH valves are designed with a pressure control unit ensuring that the rotary valve automatically stops in case of an explosion, thereby preventing flames and burning debris from passing through the rotary valve. A pressure transmitter located on the side of the filter registers the pressure inside the filter. If a significant increase is detected, the ...