- Home
- Equipment
Refine by
Orbinox Environmental Equipment & Supplies
13 equipment items found
Manufactured by:Orbinox based inAnoeta, SPAIN
Regulating or isolating round butterfly damper. Normally with one single disc on a central shaft and optionally with multiple interconnected blades. Available with pneumatic, electric, hydraulic or manual actuator. Depending on the sealing system, varying levels of tightness can be obtained (95% -100 %). Suitable for low pressure combustion gases at high temperatures (600ºC). Applications in ...
Manufactured by:Orbinox based inAnoeta, SPAIN
One or multiple louver rectangular section flange mounted louver damper for gas regulation/control and isolation. Rectangular regulating or isolating damper. Options include a single louvre on a central shaft or multiple interconnected louvres, depending on the size of the damper. Available with pneumatic, electric, hydraulic or manual actuator. Depending on the sealing system, varying levels of ...
Manufactured by:Orbinox based inAnoeta, SPAIN
Uni-directional wafer style knife gate valve for general industrial applications. The EX model knife gate valve is a uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shutoff on suspended solids in industries such as: Pulp and paper, power plants, wastewater treatment plants, chemical plants, food and beverage, ...
Manufactured by:Orbinox based inAnoeta, SPAIN
Pivoting radial or taintor gate for water level control in channels and spillways and for regulation and discharge of bottom outlets in dams and reservoirs. Pivoting taintor / radial gate for installation in channels and dam spillways either as a water / wastewater flow control or as a dam outflow regulating and discharge system. Spillway taintors are sealed on 3 sides, while sluiceway taintors ...
Manufactured by:Orbinox based inAnoeta, SPAIN
Uni-directional high performance wafer style knife gate valve for general industrial applications. The EK model knife gate is a uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shutoff on suspended solids in industries such as: Pulp and paper, power plants, wastewater treatment plants, chemical plants, food and ...
Manufactured by:Orbinox based inAnoeta, SPAIN
Free discharge energy dissipation fixed cone valve for regulation and closing of bottom and intermediate outlets in dams and reservoirs. Round-port valve for regulating and closing the flow under high heads; normally installed at the outlet works of dams under free discharge. Designed to control the amount of water downstream in order not to damage the enviroment. The outflow can be guided by ...
Manufactured by:Orbinox based inAnoeta, SPAIN
Four-side sealing flush bottom wall mounted penstock. Square or rectangular port sliding wall penstocks sealed on all 4 sides. Used for on-off or control applications in wells, tanks, pipe outlets, etc. Carbon or stainless steel fabricated construction, with tight sealing by means of elastomer seals. Available in a wide range of dimensions and for many different pressure ...
Manufactured by:Orbinox based inAnoeta, SPAIN
T-shape or 3-way round and square section flange mounted multiple diverter damper for gas regulation/control, diverting and isolation. 3 way damper with one inlet and 2 outlets. Each outlet port has a butterfly or louvre damper, normally mechanically interlocked, so that as one port opens the other closes. The 3 way damper can control, distribute or isolate gas flow. Available with pneumatic, ...
Manufactured by:Glenfield Invicta Ltd. based inMaidstone, UNITED KINGDOM
The ORBINOX model AG Stop Gate is designed for open channel installation in waste water treatment plants, irrigation, hydraulic works and hydro-electric power ...
Manufactured by:Orbinox based inAnoeta, SPAIN
Square and rectangular section flush bottom bonneted gate designed according to Bureau of Reclamation standards for bottom outlets in dams and reservoirs. Completely enclosed rectangular-port sliding gate for regulating and closing flow through the outlet works of dams. They are designed to be embedded (except the actuator) in concrete after installation. Robust fabricated construction of carbon ...
Manufactured by:Orbinox based inAnoeta, SPAIN
Uni-directional MSS SP-81 lug type knife gate valve for general industrial applications. The ET model knife gate is a uni-directional lug type valve designed according to MSS-SP-81 and TAPPI-TIS 405 for industrial service ...
Manufactured by:Orbinox based inAnoeta, SPAIN
Three-side sealing flush bottom channel penstock or gate for open channels. Square or rectangular sliding channel gate, with fixed parts embedded in concrete and seals on 3 sides. Used for on-off or control applications in open channels. Carbon or stainless steel fabricated construction, with tight sealing by means of an elastomer seal. Available in a wide range of dimensions and for many ...
Manufactured by:Orbinox based inAnoeta, SPAIN
Round swing check gate to be wall-mounted or flanged, intended to prevent backflow and commonly installed at the end of a line, as a check valve. Carbon or stainless steel fabricated construction, with tight sealing by means of an elastomer seal. Available in a wide range of dimensions and for many different pressure heads. May include a counterweight for adjustment and control of the ...