- Home
- Equipment
Refine by
Pdc Environmental Equipment & Supplies
16 equipment items found
Manufactured by:Power Distribution & Control, Inc. based inRoseville, CALIFORNIA (USA)
The PDC Model DCI-90 dual channel DC isolator is designed specifically to meet the New York Department of Transportation, Model 242 specifications. Each channel ofthe DC isolator shall present a true signal (ground closure) at the output ofits optical coupling device when a contact closure causes an input voltage ofless than 8 VDC, for longer than 5 milliseconds. A transition from a true to a ...
Manufactured by:PDC based inValencia, CALIFORNIA (USA)
Label VA Direct Thermal Paper Permanent 3" Core 4" x 4" White, 1400 per Roll, 2 Rolls per Box is available to buy in increments of ...
Manufactured by:Power Distribution & Control, Inc. based inRoseville, CALIFORNIA (USA)
The PDC SSS-86 Solid State Loadswitch is a tri-pack solid state relay package designed specifically for the Traffic Control Industry. This unit meets NEMA specification TS1-1983 and TS2 1998, clause 6.2. Each switch will turn its rated load ON or OFF within 10 deg. of the first zero cross-over point & within 5 deg. on succeeding alterations randomly timed input command signal. The electronics ...
Manufactured by:Power Distribution & Control, Inc. based inRoseville, CALIFORNIA (USA)
The PDC model SSF-86 solid state flasher is a dual circuit flasher designed for the Traffic Control Industry. This unit is conservatively rated up to 20 A per circuit. The flash rate is 56.25 flashes per minute and does not vary due to voltage or temperature variations. With the zero voltage switching design, there are no contacts to wear out or deteriorate due to arcing or corrosion. Also, ...
Manufactured by:PDC Machines Inc. based inSouderton, PENNSYLVANIA (USA)
6' L x 6' W (1.8 x 1.8 M). Single, two stage, or duplex ...
Manufactured by:PDC Machines Inc. based inSouderton, PENNSYLVANIA (USA)
15' L x 8' W (4.5 x 2.4 M). Single, two stage, or duplex ...
Manufactured by:PDC based inValencia, CALIFORNIA (USA)
Badge Buddies Card Badge Plastic LPN 3-3/32" x 3-3/8" White with Green is available to buy in increments of ...
Manufactured by:Process Development & Control LLC (PDC) based inCoraopolis, PENNSYLVANIA (USA)
PDCS electric actuators are designed for quarter-turn operating applications requiring a fail position upon loss of power supply. They utilize a compact mechanical spring set to fail the valve or damper clockwise (CLOSE) or counter-clockwise ...
Manufactured by:Power Distribution & Control, Inc. based inRoseville, CALIFORNIA (USA)
The PDC Model DCI-82 dual channel DC isolator is designed specifically to meet the California Department of Transportation, Model 242 specifications. Each channel ofthe DC isolator shall present a true signal (ground closure) at the output ofits optical coupling device when a contact closure causes an input voltage ofless than 8 VDC, for longer than 5 milliseconds. A transition from a true to a ...
Manufactured by:PDC LLC, DBA Power Distribution & Control based inHouston, TEXAS (USA)
PDC is a UL508A certified fabricator specializing in industrial control panels. The company offers custom-designed and fabricated control panels tailored to individual project requirements. Additionally, PDC produces terminal junction boxes, lighting control cabinets, and motor control cabinets. The company emphasizes close communication with customers throughout the project cycle to ensure ...
Manufactured by:PDC Machines Inc. based inSouderton, PENNSYLVANIA (USA)
3' L x 3' W (1 x 1 M). Single, two stage, or duplex ...
Manufactured by:PDC Machines Inc. based inSouderton, PENNSYLVANIA (USA)
6.5' L x 6.5' W (1.9 x 1.9 M). Single, two stage, or duplex ...
Manufactured by:Process Development & Control LLC (PDC) based inCoraopolis, PENNSYLVANIA (USA)
The PDC “Medium Duty” series butterfly valve is available in sizes from 2″ thru 24″ in a combination of materials and optional features suitable for most mid-range differential pressures and service ...
Manufactured by:Process Development & Control LLC (PDC) based inCoraopolis, PENNSYLVANIA (USA)
The PDC “Flanged” series butterfly valve is available in sizes from 4″ thru 14″ in a combination of materials and optional features suitable for most mid-range differential pressures and service ...
Manufactured by:Process Development & Control LLC (PDC) based inCoraopolis, PENNSYLVANIA (USA)
The PDC “Reduced Port” series butterfly valve is available in sizes from 3″ thru 14″ in a combination of materials and optional features suitable for most mid-range differential pressures and service ...
Manufactured by:Process Development & Control LLC (PDC) based inCoraopolis, PENNSYLVANIA (USA)
Our AWWA C504 butterfly valves have a long service life due to the medium not coming into contact with the bearing, and due to the wear resistant, corrosion and infiltration proof, seat with weld overlay. Suitable for water distribution, water treatment, pretreated wastewater, dams, power plants, industry, and pressure management. ...