- Home
- Equipment
Refine by
Pacific Environmental Equipment & Supplies
79 equipment items found
Manufactured by:ACO Pacific, Inc. based inBelmont, CALIFORNIA (USA)
The SI7 probe is a two microphone probe featuring adjustable spacing from 12.5 mm to 100 mm. S17 probeThe side by side approach eliminates the need for any spacers. Thus the spacing may be adjusted for optimum measurement bandwidth. The 100 mm spacing (twice that of most face to face configurations) permits lower frequencies of operation without special adaptors. The SI7 is designed to hold ACO ...
Manufactured by:ACO Pacific, Inc. based inBelmont, CALIFORNIA (USA)
Specifications and Accessories: 1000 Hz +/- 1%. Distortion Less than 2% THD. 0 dB Reference Point for: A, B, C, D Weighting. 94 dBSPL = 1 Pa. Accuracy - Meets IEC60942:2003 Class 1. +/-0.3 dB @ 23 C°. +/-0.5 dB 0 to 50 C°. Power 9Vdc Alkaline Battery 6F22 (NEDA 1604A). Cavity Diameter 0.525 Inch. Effective Volume 6.19 cm3+/- 0.2 cm3. 1/2 inch microphone compatible. Weight w/battery 185g. ...
Manufactured by:ACO Pacific, Inc. based inBelmont, CALIFORNIA (USA)
The 7052SYS Type 1.5 measurement microphone system offers a cost effective option to acoustic measurements. Perfomance: 4 Hz to >20 kHz response, 20 mV/Pa sensitivity and a 'A' weighted noise floor less than 20 dBA. Compatible with ACOtronTM,CCLD, IEPE, CCLD, IEPE equipment the 7052SYS features the 7052H Type 1.5 with its rugged Titanium diaphragm for excellent longterm stability and ...
Manufactured by:ACO Pacific, Inc. based inBelmont, CALIFORNIA (USA)
The MK224PH IEC61094-4 compliant phantom powered measurement microphone system offers a cost effective solution to acoustic measurements from phantom powered sources. ...
Manufactured by:ACO Pacific, Inc. based inBelmont, CALIFORNIA (USA)
The MK224SYS IEC61094-4 compliant measurement microphone system offers a cost effective option to acoustic measurements. Perfomance: 8 Hz to 18 kHz response, 50 mV/Pa sensitivity and a "A" weighted noise floor less than 14 dBA. Compatible with ACOtron™,CCLD, CCLD, and IEPE equipment the MK224SYS features the MK224 IEC61094-4 compliant with its rugged Quartz Coated Nickel diaphragm for ...
Manufactured by:Pacific Crest based inSunnyvale, CALIFORNIA (USA)
With the combination of embedded GNSS and inertial technology, integrators can harness the best in precision GNSS multi-frequency technology and the superior capabilities of inertial data for both continuous mobile positioning in poor signal environments and high accuracy ...
Manufactured by:Pacific Crest based inSunnyvale, CALIFORNIA (USA)
The XDL Rover 2 is a lightweight, ruggedized UHF receiver designed for digital radio communications between 403 and 473 MHz in either 12.5 or 25 kHz channels. This sophisticated radio utilizes Pacific Crest's latest generation XDL modem technology while remaining backward compatible with existing Pacific Crest and other ...
Distributed by:Bin Seddiq International based inAbu Dhabi, UNITED ARAB EMIRATES
The PACIFIC is designed as a self-supporting arm with appropriate large swivel joints to take up all external and internal loads and ...
Manufactured by:Sisgeo Asia Pacific Co., Ltd based in, THAILAND
In-Place Inclinometer (double wheel-carriage) is specifically designed to combine the benefits of automatic monitoring and the selective installation of probes at different depths. This configuration allows a cost effective solution in those cases where the critical depths are known. Consequently the probes may be concentrated only in some areas along the borehole profile. IPI probes are equipped ...
Manufactured by:Gale Pacific Commercial based inAltamonte Springs, FLORIDA (USA)
Engineered in Australia, Commercial 95 340 is made from high-quality UV-stabilised HDPE. Strong and stable, it’s suitable for harsh Australian conditions. It's 100% lead and phthalate-free, and we’re proud to state it is the first architectural shade cloth in the world to be granted Oeko-Tex® 100 and Greenguard® certification. ...
Manufactured by:Pacific Crest based inSunnyvale, CALIFORNIA (USA)
ADL Vantage 35 is an advanced, high speed, high power, wireless data link built to survive the rigors of GNSS/RTK surveying and precise positioning. This sophisticated 2 - 35 Watt radio modem utilizes Pacific Crest’s next generation Advanced Data Link (ADL) technology while remaining backward compatible with existing Pacific Crest, Trimble and other radios. This radio’s 35 Watts of ...
Manufactured by:Pierce Pacific Manufacturing, Inc. based inPortland, OREGON (USA)
Pierce’s rugged LEX first member main boom is designed for ground level site remediation, sorting, processing and finishing demolition site work. It is configured with a top-mount stick cylinder designed to work with a heavy-duty shear. The shear can be detached so that a second member stick can be added to allow for alternate applications and ...
Manufactured by:Sisgeo Asia Pacific Co., Ltd based in, THAILAND
Vibrating wire strain gauges provide measurements of strain in steel or concrete structures. The measurements are used to calculate structural loads or stresses. Arc-weldable strain gauges are fixed to steel structures via weldable end-blocks. On concrete surfaces they can be installed by means of mounting blocks that include rebar-bolts. Embedment strain gauges are cast into concrete structures ...
Manufactured by:Pacific Gyre, Inc. based inOceanside, CALIFORNIA (USA)
The Self-Locating Datum Marker Buoy (SLDMB) can easily be deployed by hand from ships, oil rigs and aircraft. An optional auto-detaching parachute allows deployment from aircraft or other high ...
Manufactured by:Pacific Sentry LLC based inRedmond, WASHINGTON (USA)
When the pH sensor becomes exhausted, a new sensor can easily be replaced for the old one through the convenient insertion slot. * included with each Ammonia/pH Aqua sensor are 2 additional pH ...
Manufactured by:Pierce Pacific Manufacturing, Inc. based inPortland, OREGON (USA)
Pierce has a long history of supplying excavator manufacturers-and their dealer networks-with long reach excavator booms that are built to withstand the test of time. Our booms are designed using sophisticated engineering software, built with mill-certified steel, and manufactured using cutting-edge assembly methods right here in North America. All Pierce booms meet or exceed tough OEM design ...
Manufactured by:Gale Pacific Commercial based inAltamonte Springs, FLORIDA (USA)
A premium polyethylene scrim reinforced polyfabric, specifically designed for floating cover and liner applications. Lightweight, flexible and durable Aquacon™ 345 exhibits class leading welding characteristics, providing effective and efficient field welding performance, ideal for in-factory fabrication and deployment ...
Manufactured by:Pacific Hoseflex based inBurleigh Heads, AUSTRALIA
Copper crush washers are essential components used in the automotive and hydraulic sectors for sealing applications. These washers create a reliable seal in high-pressure connections, thanks to their malleable copper composition, which allows them to effectively accommodate surface irregularities when compressed. This precise sealing capability makes copper crush washers ideal for use in various ...
Manufactured by:Western Pacific Storage Solutions based inSan Dimas, CALIFORNIA (USA)
Double your usable floor space with a two-level work mezzanine platform storage system and optimize your warehouse or industrial space with industrial ...
Manufactured by:Pacific Sentry LLC based inRedmond, WASHINGTON (USA)
This specially designed PTFE tape conveniently and economically detects ammonia (NH3) leaks. The tape has visual indicators that change color identifying leaks or defects in pipe systems, joints and couplings that contain ammonia. The tape, similar to the use of standard “plumbers tape”, is simply wrapped around the pipe or fitting and is inspected/monitored over ...