- Home
- Equipment
Refine by
Pfeiffer Environmental Equipment & Supplies
24 equipment items found
Manufactured by:Pfeiffer Electronic GmbH based inGreifenstein, GERMANY
The pneumatic pressure sensor PNA is utilised to provide continuous pneumatic level measurements in drinking water and waste water ...
Manufactured by:Pfeiffer Electronic GmbH based inGreifenstein, GERMANY
A ceramic pressure sensor and the electronics convert the hydrostatic pressure into a proportional electrical signal. The bearer cable contains a pressure compensation tube to compensate for atmospheric pressure fluctuations. The submersible transmitter is supplied as 2- wire version providing output signal 4- 20 mA as well as with measurement ranges up to 100.00 ...
Manufactured by:Pfeiffer Electronic GmbH based inGreifenstein, GERMANY
The PGS 300 controller is deployed together with one or two sensors capable of supplying standard 0 or 4-20 mA current signals (e.g. submersible transmitters ETG) as a versatile, intelligent decentralised control solution designed for use in all areas of drinking water and waste water technology – in applications that require water levels, pressure or flow rate to be determined and recorded ...
Manufactured by:Pfeiffer Electronic GmbH based inGreifenstein, GERMANY
The PGS 400 pump control unit is used together with a transducer supplying a standard power signal of 0 or 4 to 20 mA (e.g. immersion transmitter ETG) as a convenient, intelligent and decentralized control system in all drinking water and waste water technology applications that require an exact determination of the level, pressure or the flow quantity, the exact setting of the limited values, ...
Manufactured by:Pfeiffer VacuumFab Solutions based inAsslar, GERMANY
HiPace turbomolecular vacuum pumps are compact and powerful solutions forhigh and ultra-high vacuum applications. Thehybrid or magnetic bearing systemsused inHiPace turbomolecular vacuum pumps ensureslow noise and vibration levels. Additionally, specialHiPace versionsare available for the compression of light gases like hydrogen or with a corrosion-resistant coating. The wide range of dedicated ...
Manufactured by:Pfeiffer Electronic GmbH based inGreifenstein, GERMANY
The Flow Rate Evaluation Meter DMZ 200 is deployed together with reed or optical pulse generators incorporated in, for example, water meters as a versatile, intelligent flow rate meter in all areas of water technology – in applications that require flow rates to be determined and recorded with precision as well as simplicity of use and high levels of operational ...
Manufactured by:Pfeiffer VacuumFab Solutions based inAsslar, GERMANY
With its DuoLine and Pascal two-stage rotary vane pumps, Pfeiffer Vacuum has offered two very successful ranges for many years now. Their long life and pumping speed, irrespective of the gas used, are the outstanding properties of these pumps. Two-stage rotary vane pumps can be used in the pressure range between 100 hPa and a pressure roughly a decade above the final pressure. Pumps belonging to ...
Manufactured by:Pfeiffer VacuumFab Solutions based inAsslar, GERMANY
Single-stage rotary vane pumps from Pfeiffer Vacuum have long been some of the most widely used products for processes in the low and medium vacuum range. Their long life and pumping speed, irrespective of the gas used, are the outstanding properties of this pump. ...
Manufactured by:Pfeiffer VacuumFab Solutions based inAsslar, GERMANY
The compact, lightweight and portable solution: Ideal for maintenance applications, Small and portable, No compromise on performance. ...
Manufactured by:Pfeiffer Electronic GmbH based inGreifenstein, GERMANY
The PGS 300F controller is deployed together with one or two sensors capable of supplying standard 0 or 4-20 mA current signals (e.g. submersible transmitters ETG) to offer a versatile, intelligent decentralised control solution designed for use in all areas of water management where in addition to easy operation and high levels of operational reliability precise determination of flow rates in ...
Manufactured by:Pfeiffer VacuumFab Solutions based inAsslar, GERMANY
Vacuum boosters from Pfeiffer are the perfect choice for modern vacuum systems. They can enhance system performance by up to a factor of ten, significantly increasing pumping speed and achieving lower ultimate pressure. The pumped medium is conveyed through the booster to a connected vacuum pump – the backing pump – where it is compressed further before exiting the vacuum system. Our ...
Manufactured by:Pfeiffer VacuumFab Solutions based inAsslar, GERMANY
The leak detectors in our ASM 340 series guaranteehigh performancein vacuum or sniffing leak detection,even under severe test conditions: Their robust design can handle heavy cycling – repeated cycles of pressurization and depressurization to simulate real-world conditions in a test setting – under a wide range of operating ...
Manufactured by:Pfeiffer VacuumFab Solutions based inAsslar, GERMANY
The SpeedAir 3050 from Pfeiffer utilizes Mass Extraction technology and is your all-in-one solution for CCIT (container closure integrity technology) to test for leaks in nonporous pharmaceutical products, such as syringes, IV (intravenous) bags and vials. Whether your products are flexible or rigid, liquid or solid, the SpeedAir can swiftly and accurately test them all. For liquid products, the ...
Manufactured by:Pfeiffer Electronic GmbH based inGreifenstein, GERMANY
The pneumatic level sensor PNE converts air pressure generated by the hydrostatic backpressure of the water level into a proportional, standard electrical signal. It is possible to correct the zero point and scaling using a single button. False settings and system errors are indicated via LEDs. The air dome or the bubble tube can be utilised in potentially explosive ...
Manufactured by:Pfeiffer Electronic GmbH based inGreifenstein, GERMANY
The submersible transmitter is utilised to provide continuous level measurements in waste and industrial water plant. A ceramic pressure sensor and the electronics convert the hydrostatic pressure into a proportional electrical signal. The bearer cable contains a pressure compensation tube to compensate for atmospheric pressure fluctuations. The submersible transmitter is supplied as 2- wire ...
Manufactured by:Pfeiffer Electronic GmbH based inGreifenstein, GERMANY
The PGS pump control unit is used together with a transducer supplying a standard power signal of 0 or 4 to 20 mA (e.g. immersion transmitter ETG) as a convenient, intelligent and decentralized control system in all drinking water and waste water technology applications that require an exact determination of the level, pressure or the flow quantity, the exact setting of the limited values, simple ...
Manufactured by:Pfeiffer Electronic GmbH based inGreifenstein, GERMANY
The programmable pump control PGS-P assigns from the pneumatic pressure sensor PNA and bubble tube supplied pressure to a level with the unit m. The zero point (0.00 m water column) can be programmed in accordance with submerged sensor. Scaling for the level, is either via the maximum value from the transducer (2.50, 5.00 or 9.99 m) or via the actual value (momentary value). The scaling is ...
Manufactured by:Pfeiffer VacuumFab Solutions based inAsslar, GERMANY
The ASI 35 has been specially designed for integration into leak detection systems thanks to its minimal space requirements and modular design. With helium or hydrogen as tracer gas, the ASI 35 offers excellent performance for both integral and localizing test methods , or for a combination of the two. The ASI 35 is particularly easy to set up and use, with just two cables to be connected and an ...
Manufactured by:Pfeiffer VacuumFab Solutions based inAsslar, GERMANY
Diaphragm vacuum pumps generate vacuum by moving a flexible membrane, known as a diaphragm, up and down. Additionally, this diaphragm also hermetically seals the compression chamber from the motor, preventing the pumped medium from being contaminated by the gear oil. Thanks to their compactness, diaphragm vacuum pumps are ideal for integration into smaller analytical systems like leak detectors ...
Manufactured by:Pfeiffer VacuumFab Solutions based inAsslar, GERMANY
SplitFlow turbopumps feature a hybrid bearing system and are able to generatehigh and even ultra-high vacuum levels. While other vacuum pumps require adjusting settings or selecting a special model to meet specific requirements, the modular design of SplitFlow turbopumps allows you totailor your individual pumpto meet the specific needs of your process. Our customization allows for targeted ...