- Home
- Equipment
Refine by
Quick Lock Environmental Equipment & Supplies
8 equipment items found
Manufactured by:Helmut UHRIG StraBen- und Tiefbau GmbH based inGeisingen, GERMANY
The new Quick-Lock Mini for the renovation of damages in pipes with nominal diameters DN 100, DN 125 and DN 150 with lengths of 140 mm and 90 mm for bends up to 45 ° in connection with the corresponding displacement packers. The Quick Lock Mini are only with double crimp available. The new Quick-Lock mini liner end sleeve in nominal sizes DN 100, DN 125 and DN 150 is a system for connecting ...
Manufactured by:Helmut UHRIG StraBen- und Tiefbau GmbH based inGeisingen, GERMANY
The new Quick-Lock liner end cuff is a system for connection hose lines to pipes and to structures. The ring room between the liner and the old pip is sealed in long-lasting fashion, and the liner end is protected against the mechanical influences of high-pressure ...
Manufactured by:Helmut UHRIG StraBen- und Tiefbau GmbH based inGeisingen, GERMANY
The Quick-Lock system has also established itself in the renovation of drinking water and service water wells over the course of many years. Whether a vertical or horizontal installation, it is no matter for the Quick-Lock ...
Manufactured by:Rausch GmbH & Co. KG based inWeißensberg, GERMANY
Unique spot repair system based on compression technique! System for spot repair of the pipes with V4A stainless steel sleeves (Type of Material 1.4571) for diameters from 150 - 700 mm. Duroplastic EPDM rubber with extreme high durability. Rehabilitation system with DIBT-approval Nr. Z-42.3-374. Lines are mostly damaged due to poor joint sealing, tectonic movements and exposure to dynamic ...
Manufactured by:Advanced Wave Sensors (AWSensors) based inPaterna, SPAIN
Quick-Lock cell is locked by a complete system specifically designed to avoid deviations caused by user and control the pressure above the sensor. It ensures high stability even at high frequencies and minimum distortion at low and high harmonics. No matter how many times you open and close the cell, measurements are reproducible and reliable. Quick-Lock patented design is also especially ...
Manufactured by:Helmut UHRIG StraBen- und Tiefbau GmbH based inGeisingen, GERMANY
The Quick-Lock-BIG system was developed as a separable cuff for renovation in accessible pipe ...
Manufactured by:Helmut UHRIG StraBen- und Tiefbau GmbH based inGeisingen, GERMANY
The next Quick-Lock flex cuff can be used in the position deviations of pipe ...
Manufactured by:Helmut UHRIG StraBen- und Tiefbau GmbH based inGeisingen, GERMANY
The Quick-Lock system has been successfully used for many years as a repair procedure for closed sewer renovation. The basis of our development and production are quality and sustainability. Positive long-term experiences from customers and Quick-Lock users worldwide also guarantees you pipe renovation on the highest level with ...
