- Home
- Equipment
Refine by
Randolph Environmental Equipment & Supplies
27 equipment items found
Premium
Manufactured by:Randolph Austin Company based inManchaca, TEXAS (USA)
The 615-PHO is machined from a 316 SS casting and has a stainless steel components. The pump is rugged, reliable, and easy-to-use. The 615-PHO is designed for applications where the chemical resistance of a stainless steel housing is ...
Premium
Manufactured by:Randolph Austin Company based inManchaca, TEXAS (USA)
A fully programmable peristaltic, the TP4000V peristaltic pump is designed for dosing or small batch filling operation. Mounted onto a stainless steel cabinet with the TP4000 pump head allows for easy tubing changes. The pump can interface with a computer or PLC or receive a remote start stop signal from a foot switch or other device. The dimensions for the pump are 13.2″ (335 mm) W x ...
Premium
Manufactured by:Randolph Austin Company based inManchaca, TEXAS (USA)
Available for OEM applications, the TP 4000 pump is mounted directly to a 24 VDC motor. Available with either 100, 170, or 280 rpm motors the SETP-4000 pump model is an excellent choice for dependable OEM applications. The pump utilizes either a 1/4″ or 5/16″ ID tubing with a 3/32″ wall and can also be ordered with a high performance DC ...
Premium
Manufactured by:Randolph Austin Company based inManchaca, TEXAS (USA)
The 620-PHO is the newest addition to the 600 series of pump heads and features a hinged side plate and tube clamp as well as a pump that can be mounted in 90º increments of rotation. The pump housing is machined from an aluminum casting and the internal plate and shaft are stainless steel. The 620-PHO provides easy access to the tubing without separate parts, such as knurled nuts, that can ...
Premium
Manufactured by:Randolph Austin Company based inManchaca, TEXAS (USA)
The TP 1000 V is designed as an exact dose, extremely precise metering or bottling peristaltic pump. The TP 1000 V can be operated in a semiautomatic mode or be fully integrated through the RS232 as an automatic filling or metering machine. With a flow rate range of .38 ml to .177 ml per minute, depending on tubing and rotor assembly selection, the TP 1000 V is an excellent choice for ...
Premium
Manufactured by:Randolph Austin Company based inManchaca, TEXAS (USA)
The 400-PHO is designed for maximum cost effectiveness, and uses a molded polycarbonate housing and triple or quadruple impeller roller yoke assembly. This panel-mount pump has a hinged cover plate which is intended for more demanding OEM or industrial fluid pumps applications. The models are available in fixed speed, air drive, explosion-proof, and variable speed AC or DC ...
Premium
Manufactured by:Randolph Austin Company based inManchaca, TEXAS (USA)
Cilran is a new thermoplastic elastomer possessing exceptional physical properties. The chemical resistance of Cilran allows its use with acids, salts, alkalies and water based solutions. Cilran maintains excellent elasticity, elongation, tear strength and low gas permeability throughout the working temperature range of -30º to 190ºF. The high flex factor and outstanding abrasion ...
Premium
Manufactured by:Randolph Austin Company based inManchaca, TEXAS (USA)
ED-Plex is a thermoplastic elastomer combining the chemical and environmental resistance of EPDM with polypropylene. Applications include pumping acid and base solutions as well as adhesives, inks and paints. Customers using ED-Plex to pump hydrocarbon based liquids should test the tubing prior to use. With a working temperature range of -40º to 190ºF, and excellent flex fatigue ...
Premium
Manufactured by:Randolph Austin Company based inManchaca, TEXAS (USA)
The 750-PHO is machined from an aluminum casting and has a stainless steel plate and shaft as well as stainless sleeved roller assembly. The pump is rugged, reliable, and ...
Premium
Manufactured by:Randolph Austin Company based inManchaca, TEXAS (USA)
The TP-3005 is a small robust peristaltic hose pump suitable for intermittent peristaltic pump OEM applications. Pumps are available with 12 or 24 VDC motors. Materials of construction are a polycarbonate housing and back plate, nylon rollers. Tubing dimensions are 3.2mm (1/8″) or 4.8mm (3/16″) internal diameter with a 1.6mm (1/16″) ...
Premium
Manufactured by:Randolph Austin Company based inManchaca, TEXAS (USA)
Di-Sol is a blended water soluble material that is formulated for specific applications and manufacturing processes. The polymer is then either molded or extruded to give the customer a product for the required application. Most of these products have been specifically manufactured to serve as an enclosure for carrying chemical substrates in the form of powders, paste and some fluids. Areas of ...
Premium
Manufactured by:Randolph Austin Company based inManchaca, TEXAS (USA)
The 500-PHO is machined from an aluminum casting and has a stainless steel plate and shaft as well as stainless sleeved roller assembly. The pump is rugged, reliable, and easy-to-use. The 500-PHO is good choice for use from the laboratory to industrial applications such as paper & pulp, printing, metering, and fluid ...
Premium
Manufactured by:Randolph Austin Company based inManchaca, TEXAS (USA)
The 630 pumps are designed to mount directly onto a right angle gear drive. This allows for a very compact footprint as well as the ability to orient the pump in 90 degree increments. Machined from cast aluminum, the pumps have a stainless steel plate and shaft, stainless steel shoulder bolts with a chemically resistant plastic sleeve. The 630 uses either 3 /8 “ID x 5/8″ OD or a ...
Premium
Manufactured by:Randolph Austin Company based inManchaca, TEXAS (USA)
Excellent for aliphatic, aromatic and chlorinated solvents including naptha, toluene, and carbon tetrachloride. Chemical resistant tubing, use for solvents and fuels. Povinal tubing is chemical resistant tubing, excellent for aliphatic, aromatic and chlorinated hydrocarbon solvents. Povinal is a polyvinyl alcohol based tubing, ideal for pressures to 20 psi and temperatures of 15º to ...
Premium
Manufactured by:Randolph Austin Company based inManchaca, TEXAS (USA)
The 610-PHO (pump head only) is not your ordinary peristaltic pump. Machined from an aluminum housing with internal stainless steel components, the 610-PHO is rugged and reliable. The pump accepts either a 3/8″ or 1/2″ ID flexible tubing with a 1/8″ wall. The 610-PHO has a flow rate of up to 3.4 GPM at 400 RPM and can withstand the test of ...
Premium
Manufactured by:Randolph Austin Company based inManchaca, TEXAS (USA)
RA Seam Tape can be used in covering seams and protecting fabric edges on tents, awnings, boat/car covers, and in a variety of other unique applications. This tape is a vinyl/urethane polymer that is a flexible ribbon and abrasion resistant. RA Seam Tape may be applied with glue, a hot air welder, or a radio frequency welder (depending on the material ...
Premium
Manufactured by:Randolph Austin Company based inManchaca, TEXAS (USA)
Custom extruded flexible profiles are generally component parts for other manufactured products. We extrude parts for customer or industry specific applications, working closely with the customer to meet their exact ...
Premium
Manufactured by:Randolph Austin Company based inManchaca, TEXAS (USA)
Vytex Clear, flexible food grade tubing, also ideal for general purpose use. Flexible vinyl tubing for food and beverage applications as well as for general purpose applications. Vytex vinyl tubing is a clear flexible food grade tubing also ideal for general purpose usage with dilute aqueous solutions, both acids and alkalis. Suitable for food and beverage usage. Strong acid solutions may be used ...
Premium
Manufactured by:Randolph Austin Company based inManchaca, TEXAS (USA)
The 300-OQC is polycarbonate molded rotary pump head ideal for OEM and laboratory applications. With the quick-release cover design, the 300-OQC pump is easy to clean and change tubing. The 300-OQC is designed to use flexible tubing with a durometer of 35-55 (Shore A). The 300-OQC comes standard with a dual impeller yoke, but can be configured for three impellers and is designed to mount on a ...
Premium
Manufactured by:Randolph Austin Company based inManchaca, TEXAS (USA)
Di-Tube is an ideal packaging system for delivering surfactants, foaming agents, bacterial additives, colorants and other agents for quick dispersion into water. Made of water-soluble materials the Di-Tube is designed to carry the enclosed contents into the water source where it will dissolve and release them. Di-Tube will dissolve in concentrated brine solutions, and is an efficient and ...