- Home
- Equipment
Refine by
Sea Environmental Equipment & Supplies
108 equipment items found
Manufactured by:The Bosworth Company based inEast Providence, RHODE ISLAND (USA)
Use Bosworth’s foot/check valves to keep your pump primed, increase pump lift or prevent backflow. The CV-0400D comes in a wide variety of end sizes and styles. Flapper valves are standard, but duckbill and umbrella valves also ...
Manufactured by:The RuptureSeal Company based inCharlottetown, PRINCE EDWARD ISLAND (CANADA)
seal leaks 1/8"-1" (4mm-25mm) ...
Manufactured by:The RuptureSeal Company based inCharlottetown, PRINCE EDWARD ISLAND (CANADA)
1/4"x 4" (6mm-100mm) - 2"x 6" (50mm-150mm) ...
Manufactured by:SEAM based inAvaldsnes, NORWAY
The e-SEA® Bridge product series can be offered as complimentary products to the SEAM energy efficient solutions from the e-SEAMatic® BLUE series, or as stand-alone systems for bridge workplace management. The system is successfully implemented as a workplace configurator where crew ergonomics and common dimming control of all bridge and navigation equipment is set ...
Manufactured by:Sea & Sun Technology GmbH based inTrappenkamp, GERMANY
The Tritech Altimeter is based on the same high performance electronics found in the proven, industry standard SeaKing sonar and profiler systems. The range of compact Tritech Altimeters provide exceptionally accurate height of seabed and subsea distance measurements. Full digital synthesis of transmit and receive frequencies, together with greatly improved input dynamic range, offer unsurpassed ...
Manufactured by:Sea-Gear Corporation based inMelbourne, FLORIDA (USA)
SEA-GEAR Model 9100 Student Plankton Net is available in 13, 20 and 25cm (5, 8 and 10”) diameters with a standard length of 3:1, in a select range of mesh openings. Student Nets have a Stainless Steel net ring sewn into a nylon mouth collar and feature a 250 lb. test three point bridle with swivel or tow ring. The cod end diameter is 5cm. Light duty construction is a good choice for ...
Manufactured by:SEA Ltd based inRedditch, UNITED KINGDOM
Auger @ 6.2m length (with effective flight length as ...
Manufactured by:Sea-Gear Corporation based inMelbourne, FLORIDA (USA)
Manufactured by:Sea-Tech Systems & Mobert Marine LLC based inSeattle, WASHINGTON (USA)
The Best Iridium Handheld Airtime Plan!Sea-Tech offers both USA +1 and Standard International Phone numbers with our Iridium Handheld Phone SIM Cards. Tired of getting new SIM cards every season? Wishing you could keep your sat phone number the same from year to year and season to season? Wishing it was easier for family and friends to call your satellite phone? Solve these problems with the ...
Manufactured by:Sea-Land Srl based inTorreglia, ITALY
The pumps with shaft of the series “BSN” are manufactured according to DIN 24255 (UNI EN 733) standards. They have been designed to pump clean liquids, without abrasives and suspended solids, non-explosive or aggressive for the pump’s materials. Liquid temperature not higher than 35 °C for domestic use (CEI EN 60335-2-41) or 90 °C for other use, while the ambient ...
Manufactured by:Sea Foam Sales Company based inChaska, MINNESOTA (USA)
Premium synthetic power steering fluid. Universally compatible with all types of domestic & foreign vehicles. Meets manufacturer performance requirements for all makes & models. Prevents oxidation & corrosion. Protects hoses & seals from deterioration. Blended with antifoam & friction ...
Manufactured by:Sea-Land Srl based inTorreglia, ITALY
The self-priming centrifugal deep suction electric pumps series JAP have been designed to pump clean water from wells of at least 4” when the water level is more than 8 m deep. Liquid temperature not higher than 35 °C for domestic use (CEI EN 60335-2-41) or 60 °C for other use, while the ambient temperature must not be higher than 40 °C. Flow rate up to ~ 3,6 m3/h. Heads up to ~ ...
Manufactured by:Sea-Land Srl based inTorreglia, ITALY
The self-priming centrifugal electric pumps series JB have been designed to pump clean water from wells, even if mixed with gas. Maximum suction up to 8-9 m. Liquid temperature not higher than 35 °C for domestic use (CEI EN 60335-2-41) or 60 °C for other use, while the ambient temperature must not be higher than 40 °C. Flow rate up to ~ 9 m3/h. Heads up to ~ 60 ...
Manufactured by:Sea-Land Srl based inTorreglia, ITALY
The submersible electric wastewater pumps with non-clog vortex impeller of the series DV have been designed to pump waste water, chemically not aggressive for the pumps’ material. also with suspended solids with a max.: Ø 63mm for DV25, Ø 78mm for DV30, Ø 88 for DV40, Temperature not higher than 35 °C (CEI EN ...
Manufactured by:Sea-Gear Corporation based inMelbourne, FLORIDA (USA)
SEA-GEARc Model 9765 Large Bongo Frame consists of two 61cm (24”) I.D. hand-wrapped fiberglass reinforced polyester resin (FPR) bodies. The two bodies are joined by a bronze and stainless steel yoke/axle assembly which features a self-contained towing ...
Manufactured by:The Bosworth Company based inEast Providence, RHODE ISLAND (USA)
Redesigned for ease of turning and to resist valve "freeze-up". Bosworth’s entry level Y-valve, the "94" comes standard with 1" ID smooth ends, but tapped, threaded and barbed ends are also available. An easily removable stop ring converts all Sea-Lect Y-valves from a "2-Flow-Path" position mode to a "3-Flow-Path" position ...
Manufactured by:SEA Ltd based inRedditch, UNITED KINGDOM
Screw anchors are a long established form of piling and invented in England by Alexander Mitchell in 1833 for supporting lighthouse structures in tidal basins. Today screw anchors are widely used in light to medium piling applications such as for conservatories, outdoor elevated stadium seating, light to medium weight building foundations, pre-fabricated buildings, electricity pylons, street ...
Manufactured by:Green Sea Guard based inCardiff, UNITED KINGDOM
The G100 provides very accurate, high resolution and simultaneous readings of an engine’s exhaust gases. This precise view of the composition of the exhaust gases produces an extremely valuable view of the performance of an engine. We have used this array to diagnose several engine faults to date and are currently developing algorithms that will allow automated engine diagnosis. Up to ...
Manufactured by:Sea-Land Srl based inTorreglia, ITALY
The submersible 4” motors with rewindable stator cooled by non-toxic oil suitable for foodstuffs uses approved by F.D.A. (Food and Drug Administration). They are manufactured following the classic standards, but with high-tech procedures and using only high quality materials. Thanks to the Continuous lubrication of all the parts in movement by the filled liquid, these motors are extremely ...
Manufactured by:New Nautical Coatings, Inc. based inClearwater, FLORIDA (USA)
AF33 is a harder ablative (self-polishing) antifoulant, yielding a more durable finish on all types of vessels. With it’s premium multi-season protection at a single-season price, AF33 is the choice for discerning captains of workboats, daysailers and serious cruising ...