- Home
- Equipment
Refine by
Sea Land Environmental Equipment & Supplies
10 equipment items found
Manufactured by:Sea-Land Srl based inTorreglia, ITALY
The close-coupled centrifugal electric pumps with one impeller series K have been designed to pump clear liquids, without abrasives and suspended solids, non-explosive or aggressive for the pump’s materials. Liquid temperature not higher than 35 °C for domestic use (CEI EN 60335-2-41) or 90 °C for other use, while the ambient temperature must not be higher than 40 °C. Flow rate ...
Manufactured by:Sea-Land Srl based inTorreglia, ITALY
The close-coupled pumps with peripheral impeller series BASIC & ONDINA have been designed to pump clean liquids, without abrasives and suspended solids, non-explosive or aggressive for the pump’s materials. Liquid temperature not higher than 35 °C for domestic use (CEI EN 60335-2-41) or 90 °C for other use, while the ambient temperature must not be higher than 40 °C. Flow ...
Manufactured by:Sea-Land Srl based inTorreglia, ITALY
The close-coupled electric pumps with back to back impellers (with an axial balanced thrust) series BK have been designed to pump from basins or storage tanks, clean liquids, without abrasives and suspended solids, non-explosive or aggressive for the pump’s materials. Liquid temperature not higher than 35 °C for domestic use (CEI EN 60335-2-41) or 90 °C for other use, while the ...
Manufactured by:Sea-Land Srl based inTorreglia, ITALY
The pumps with shaft of the series “BSN” are manufactured according to DIN 24255 (UNI EN 733) standards. They have been designed to pump clean liquids, without abrasives and suspended solids, non-explosive or aggressive for the pump’s materials. Liquid temperature not higher than 35 °C for domestic use (CEI EN 60335-2-41) or 90 °C for other use, while the ambient ...
Manufactured by:Sea-Land Srl based inTorreglia, ITALY
The self-priming centrifugal deep suction electric pumps series JAP have been designed to pump clean water from wells of at least 4” when the water level is more than 8 m deep. Liquid temperature not higher than 35 °C for domestic use (CEI EN 60335-2-41) or 60 °C for other use, while the ambient temperature must not be higher than 40 °C. Flow rate up to ~ 3,6 m3/h. Heads up to ~ ...
Manufactured by:Sea-Land Srl based inTorreglia, ITALY
The self-priming centrifugal electric pumps series JB have been designed to pump clean water from wells, even if mixed with gas. Maximum suction up to 8-9 m. Liquid temperature not higher than 35 °C for domestic use (CEI EN 60335-2-41) or 60 °C for other use, while the ambient temperature must not be higher than 40 °C. Flow rate up to ~ 9 m3/h. Heads up to ~ 60 ...
Manufactured by:Sea-Land Srl based inTorreglia, ITALY
The submersible electric wastewater pumps with non-clog vortex impeller of the series DV have been designed to pump waste water, chemically not aggressive for the pumps’ material. also with suspended solids with a max.: Ø 63mm for DV25, Ø 78mm for DV30, Ø 88 for DV40, Temperature not higher than 35 °C (CEI EN ...
Manufactured by:Sea-Land Srl based inTorreglia, ITALY
The submersible 4” motors with rewindable stator cooled by non-toxic oil suitable for foodstuffs uses approved by F.D.A. (Food and Drug Administration). They are manufactured following the classic standards, but with high-tech procedures and using only high quality materials. Thanks to the Continuous lubrication of all the parts in movement by the filled liquid, these motors are extremely ...
Manufactured by:Sea-Land Srl based inTorreglia, ITALY
The close-coupled centrifugal electric pumps with one impeller series KA have been designed to pump clear liquids, without abrasives and suspended solids, non-explosive or aggressive for the pump’s materials. Liquid temperature not higher than 35 °C for domestic use (CEI EN 60335-2-41) or 90 °C for other use, while the ambient temperature must not be higher than 40 °C. Flow rate ...
Manufactured by:Sea-Land Srl based inTorreglia, ITALY
The close-coupled pumps with peripheral impeller series BASIC have been designed to pump clean liquids, without abrasives and suspended solids, non-explosive or aggressive for the pump’s materials. Liquid temperature not higher than 35 °C for domestic use (CEI EN 60335-2-41) or 90 °C for other use, while the ambient temperature must not be higher than 40 °C. Flow rate up to 3 ...