- Home
- Equipment
Refine by
Sensorhawk Environmental Equipment & Supplies
15 equipment items found
Manufactured by:Enviromon.net based inWindsor, ONTARIO (CANADA)
The Dry Contact sensor is a simple connection that can be used to for relay controlled burglar alarms, fire alarms or any dry contact switch or relay application that requires monitoring by the base unit. Dry contact sensors are user definable and can be used to detect many different inputs such as UPS status, security systems, air conditioning status. The base unit senses this closure and ...
Manufactured by:Enviromon.net based inWindsor, ONTARIO (CANADA)
The Door & Security Smart Sensor is a magnetic on / off switch, which closes when one half of the sensor is in close proximity to its mate. It is designed to be mounted on doors or windows. When the two sensor pairs are moved apart from each other they open. The base unit senses this closure and opening, and reports the ...
Manufactured by:Enviromon.net based inWindsor, ONTARIO (CANADA)
This sensor is designed for protecting against forced entry by hammer, saw, crowbar etc… through walls, ceilings, windows, safes, cabinets, etc… It will initiate an alarm when a vibration from a non-desirable force strikes the protected surface. A built-in tamper switch is independent from the circuit of the vibration detector for your convenience. Vibration contacts are adjustable by turning an ...
Manufactured by:Enviromon.net based inWindsor, ONTARIO (CANADA)
These dual-purpose Water Resistant Temperature & Humidity Smart Sensors can measure both temperature and humidity. You can even poll temperature and humidity values from a network management system with integrated SNMP trap and polling support (MIB file ...
Manufactured by:Enviromon.net based inWindsor, ONTARIO (CANADA)
The 5 Input Dry Contact sensor is a simple connection to burglar alarms, fire alarms or any application that requires monitoring by the base unit. Dry contact sensors are user definable and can be used to detect many different currents and inputs such as UPS status, security systems, air conditioning status. The base unit senses this closure and opening, and reports the condition. ...
Manufactured by:Enviromon.net based inWindsor, ONTARIO (CANADA)
The Motion Detection Smart Sensor detects motion or movement and it can be mounted to a wall or ceiling. Use the motion detection sensor to automatically record room entries date and time, or use it to trigger additional systems such as lights, security cameras, or alarms when configured with our base ...
Manufactured by:Enviromon.net based inWindsor, ONTARIO (CANADA)
The Smoke Detection Smart Sensor detects the presence of smoke. It works with all SensorHawk Base Units and SecurityHawk Base Units and must be connected to a base unit in order to function properly. SNMP traps and sensor polling available (MIB file supplied). ...
Manufactured by:Enviromon.net based inWindsor, ONTARIO (CANADA)
Worried about water leaks, sprinkler systems or floods? Detect these conditions quickly with this water/liquid detection sensor. This Liquid Detection Sensor is much more precise than most commercially-available water sensors, and can even detect the presence of distilled ...
Manufactured by:Enviromon.net based inWindsor, ONTARIO (CANADA)
Ideal for covering large areas to protect water sensitive equipment from potential disaster. Notifications via E-mail, SNMP trap, SMS and much more. Comes in extendable 10ft lengths, or pre order custom length Powered by the SecurityHawk/SensorHawk base unit, no additional power required. Will report critical state if cable is cut or ...
Manufactured by:Enviromon.net based inWindsor, ONTARIO (CANADA)
The SecurityHawk Rope Fuel sensor is a rope-type leak detector that connects to any SensorHawk or SecurityHawk RJ-45 Intelligent Sensor Ports and facilitates the detection of fuel and other ...
Manufactured by:Enviromon.net based inWindsor, ONTARIO (CANADA)
The 4-20 mAmp Voltage Converter is used to integrate the Base Units with a 4-20 mAmp transmitter. 4-20 mAmp Voltage Converter technology is used to communicate analog signals over long distances where electrical interference is a problem. This solution is often used in the process control industry to collect the analog values from a wide array of remote sensors. Current signals are much less ...
Manufactured by:Enviromon.net based inWindsor, ONTARIO (CANADA)
This Basic Temperature Smart Sensor measures temperature in degrees Celsius or ...
Manufactured by:Enviromon.net based inWindsor, ONTARIO (CANADA)
This Waterproof Temperature Smart Sensor measures temperature in degrees Celsius or Fahrenheit. It is specially designed for use outdoors, or for measuring the temperatures of ...
Manufactured by:Enviromon.net based inWindsor, ONTARIO (CANADA)
These dual-purpose Basic Temperature & Humidity Smart Sensors can measure both temperature and humidity. You can even poll temperature and humidity values from a network management system with integrated SNMP trap and polling support (MIB file supplied). SMART SENSOR FEATURES View from any web browser Quick and simple set-up and configuration Receive email and SMS alert notifications Supports ...
Manufactured by:Enviromon.net based inWindsor, ONTARIO (CANADA)
Heat dissipation is critical in today's wiring closets and datacenters. If the flow of air stops, your equipment might just stop working too. The AirFlow Smart Sensor is meant to measure the presence or the absence of air flow. This is not a precision sensor, it is ONLY designed to sense the presence and non-presence of airflow and not to measure the amount of ...