- Home
- Equipment
Refine by
Spinpro Environmental Equipment & Supplies
13 equipment items found
by:Spinpro based inBellingham, WASHINGTON (USA)
Dewatering Tubes are also referred to as GeoTubes, Geotextile dewatering bags, sludge bags, etc.. This process is widely used in most dredging and dewatering applications. The dewatering containers are especially beneficial where the sludge is removed hydraulically like dredging or high-volume pumping. The technology is based on filtration starting with the apparent opening size of the geotextile ...
by:Spinpro based inBellingham, WASHINGTON (USA)
A decanter centrifuge (also known as solid bowl centrifuge) separates continuously solid materials from liquids in the slurry and therefore plays an important role in the wastewater treatment, chemical, oil and food processing industries. The centrifuge uses mechanical pressure to achieve fast results compared to dewatering tubes that use gravity ...
by:Spinpro based inBellingham, WASHINGTON (USA)
The SpinPro AutoFloc Automatic Polymer Flocculation Control System is a chemical control system used to optimize flocculant and/or coagulant dosage on dewatering applications including but not limited to screw presses, belt presses, dewatering tubes (Geo-Tubes), centrifuges, clarifiers and DAF;s. The system utilizes a microprocessor based controller in conjunction with a suspended solids or color ...
by:Spinpro based inBellingham, WASHINGTON (USA)
Roll – Off Tubes or Dumpster Bags are typically 15 foot circumference to 21.5 foot circumference x 20 feet long. They are designed to fit in existing containers that also act as a containment to capture the liberated liquids from the product pumped into the Roll Off ...
by:Spinpro based inBellingham, WASHINGTON (USA)
Hydraulic dredging operations remove sediment by mixing the water and the sediment and pumping the material to a dewatering lay-down or staging area. Hydraulic dredges consists of a cutter-head, ladder and a hydraulic pump. The cutter-head is lowered into the sediment where the auger in the cutter-head mixes the water and sediment to form a consistent slurry. The cutter-head depth and rate of ...
by:Spinpro based inBellingham, WASHINGTON (USA)
Billions of cubic yards/meters of sediment are dredged each year. Remediation and construction projects in and around waterways and process ponds present numerous challenges in sediment removal, dewatering and disposal. Environmental dredging involves a highly controlled removal process, with efforts focused on minimizing the removal of clean material while effectively removing and controlling ...
by:Spinpro based inBellingham, WASHINGTON (USA)
Spinpro supplies containment liners for your dewatering project. Our most common liner is a 21 mil reinforced liner that is easily deployed and can be made in one piece for smaller applications. For larger applications we supply up to 80 mil smooth and textured liners and can supply you with the training and equipment to seam them.EDPM Liners for Ponds, Lagoons, etc., EPDM Liners are sold in ...
by:Spinpro based inBellingham, WASHINGTON (USA)
Turbidity Curtains also referred to as Silt Curtains, Silt Barriers, or Turbidity Barriers, Turbidity Curtains or Floating Barriers are designed to deflect, contain and isolate sediment in order to stop or reduce suspended or floating particles from migrating from one area to another. Applications include Dredging, Marine Construction, Wastewater Ponds, Lagoons, and Rivers to name a few. ...
by:Spinpro based inBellingham, WASHINGTON (USA)
Hanging bags are approximately 3 feet x 3 feet or 1 meter x 1 meter with the sides and bottom sewn shut leaving the top open. The purpose of the hanging bag is for testing the de-watering performance of the bag by suspending it 3-5 feet from the ground and pouring the sludge slurry into the opening in the top of the bag. This process allows the Customer to match up the type and amount of pre ...
by:Spinpro based inBellingham, WASHINGTON (USA)
Cubic Yard Dewatering bags are made with 4 sides measuring 1 yard x 1 yard sewn together to make the sides and a 1 yard x 1 yard sewn in for the bottom and the top so you basically have 6 1 yard x 1 yard pieces sewn into a cube. A fill port or flange is installed in the top of the bag and the product is pumped in to the bag to dewater the product and filter the ...
by:Spinpro based inBellingham, WASHINGTON (USA)
Dredging as described in Wikipedia is the excavation activity usually carried out underwater, in shallow seas or freshwater areas with the purpose of gathering up bottom sediments and disposing of them at a different location. This technique is often used to keep waterways navigable. It is also used as a way to replenish sand on some public beaches, where sand has been lost because of coastal ...
by:Spinpro based inBellingham, WASHINGTON (USA)
We have a turn key packages that include sizing the equipment and accessories for your application, training your staff on the operation and maintenance as well as assisting you with troubleshooting mechanical and process issues. We supply both Diesel driven and electrical remote control dredges that are robust, reliable and versatile. We also specialize in the removal of accumulated sediments ...
by:Spinpro based inBellingham, WASHINGTON (USA)
We supply Polymer Feeders for Dry and Liquid Emulsion Polymers. Our basic polymer feeder unit comes with static flow meters and a positive displacement pump with a variable speed control for varying the polymer and water solution and water flow ...