- Home
- Equipment
Refine by
Applications
- Air quality and industrial gas monitoring systems for Ambient air monitoring
- Air quality and industrial gas monitoring systems for Road side air monitoring
- Air quality and industrial gas monitoring systems for Semiconductor
- Air quality and industrial gas monitoring systems for CEMS - Stack air monitoring
- Air quality and industrial gas monitoring systems for Medical, pharmaceutical, food & beverage
- Air quality and industrial gas monitoring systems for Water treatment
Tapi Environmental Equipment & Supplies
50 equipment items found
Manufactured by:Teledyne API based inSan Diego, CALIFORNIA (USA)
The CAT-O3 series of ozone destructs safely decompose high concentrations of ozone gas to sub-ppm levels that are below recommended ozone safety limits. The catalytic method of decomposition uses a metal oxide catalyst to passively convert the ozone to oxygen. The CAT-O3 series of ozone destructs are made from a welded stainless steel enclosure protected with a heat shield. They are carefully ...
Manufactured by:Teledyne API based inSan Diego, CALIFORNIA (USA)
The SCI-552 is a system controller for ozone delivery systems that provides electronic control interfaces for a number of typical system components, including: ozone generators, EV valves, mass flow controllers, back-pressure controllers, Teledyne API 452 ozone sensors, Teledyne API 470 dissolved ozone sensors, and a water chiller. The SCI-552 features hardware and software support for a number ...
Manufactured by:Teledyne API based inSan Diego, CALIFORNIA (USA)
The OPTI-Sense series of sensors is based on Non-Dispersive Infrared (NDIR) technology. They are designed to precisely measure the absorbance in the infrared spectrum of specialty gases typically found in semiconductor applications. They are very compact and designed with no moving parts, making the OPTI-Sense robust and ideal for continuous in-situ gas monitoring of semiconductor processes. ...
Manufactured by:Teledyne API based inSan Diego, CALIFORNIA (USA)
The Model T640 PM Mass Monitor is the next breakthrough in ambient particulate monitors. The T640 delivers 1-min or better time resolution with exceptional sensitivity and precision. The instrument is very low maintenance and requires no sample media for minimal cost of ...
Manufactured by:Teledyne API based inSan Diego, CALIFORNIA (USA)
The Model T100U Trace-level SO2 analyzer has been developed specifically to address the challenges of low level monitoring as required, for example, in the US NCore network. It uses the proven UV fluorescence principle, and is designed to allow ultra-sensitive SO2 measurements while still meeting the requirements for use as a US EPA compliance ...
Manufactured by:Teledyne API based inSan Diego, CALIFORNIA (USA)
The Model T100H SO2 analyzer uses the proven UV fluorescence principle with the high measurement ranges and interferent rejection needed for extractive source monitoring. The Model T100H provides a simple but precise solution for a broad range of CEM and stack testing ...
Manufactured by:Teledyne API based inSan Diego, CALIFORNIA (USA)
The Model T101 H2S analyzer uses the proven UV fluorescence principle to measure hydrogen sulfide at levels commonly required for ambient air monitoring. The Model T101 is equipped with an internally mounted catalytic converter set at 315°C to convert H2S to SO2. A switching mode alternately measures H2S and SO2 while showing both readings concurrently on the front ...
Manufactured by:Teledyne API based inSan Diego, CALIFORNIA (USA)
The Model T703U is a microprocessor controlled ozone calibrator for precision gas analyzers. Expanded ozone audit levels have created a need for precise ozone calibration well below the capabilities of standard calibrators. The Model T703U is designed to meet the requirements of ultra-low ozone ...
Manufactured by:Teledyne API based inSan Diego, CALIFORNIA (USA)
The Model T750 is a portable, microprocessor based calibrator for precision gas analyzers. Using highly accurate mass flow controllers combined with compressed sources of standard gases, calibration standards are provided for multipoint span and zero calibrations. The T750 is housed in a high-density, molded travel case which includes an integral handle and wheels for durability and ease of use ...
Manufactured by:Teledyne API based inSan Diego, CALIFORNIA (USA)
The Model 751H is a portable, fully self-contained source of high purity zero air for dilution calibrators. It is ideal for use with sensitive analyzers in ambient background and trace level applications. Packaged in a wheeled, high density plastic case, the Model 751H provides ultra-high purity output with a warm-up time of 30 ...
Manufactured by:Teledyne API based inSan Diego, CALIFORNIA (USA)
The Model T300M CO analyzer measures low to mid ranges of carbon monoxide by comparing infrared energy absorbed by a sample to that absorbed by a reference gas according to the Beer-Lambert law. Using a Gas Filter Correlation Wheel, a high-energy IR light source is alternately passed through a CO filled chamber and a chamber with no CO present. The light path then travels through the sample ...
Manufactured by:Teledyne API based inSan Diego, CALIFORNIA (USA)
The Model N500 CAPS NOX analyzer uses superior Cavity Attenuated Phase Shift (CAPS) Spectroscopy to measure True NO2, NOX, and NO gases. The instrument combines direct NO2 measurements with highly efficient gas phase titration (GPT) to convert and measure the NO gas component. An automatic baseline reference cycle accounts and compensates for any potential baseline drift due to varying ...
Manufactured by:Teledyne API based inSan Diego, CALIFORNIA (USA)
The Model 454 is a microprocessor based gas monitor for measuring mid to high concentrations of ozone in oxygen or air. Available in a standard DIN panel mount configuration with a 4-digit LED display, the compact design provides ease of mounting and ...
Manufactured by:Teledyne API based inSan Diego, CALIFORNIA (USA)
The Model T753U is a portable, microprocessor based precision Calibrator for Ozone gas instruments and sensors. Using a sophisticated Ozone generation system, combined with a sensitive photometer and pneumatic design, the T753U produces stable and reliable concentrations of Ozone in a convenient and rugged package based on our popular T750U Portable Multigas Calibrator platform. The T753U is ...
Manufactured by:Teledyne API based inSan Diego, CALIFORNIA (USA)
The OG-5000 series of ozone generators is designed to produce high concentrations of ultra clean ozone gas for use in semiconductor applications including CVD, ALD thin film, oxide growth and wet bench cleaning processes. The OG-5000 series has a compact, water cooled design that can be easily integrated with Teledyne API's ozone system controller, ozone leak detectors, ozone concentration ...
Manufactured by:Teledyne API based inSan Diego, CALIFORNIA (USA)
The Mini ODS is a compact, integrated ozone delivery system designed to produce ozone concentrations of 21% w/w, 320g/Nm3 for a wide range of wafer processing applications. It is a very compact yet complete ozone delivery system, including: a high purity ozone generator, high concentration ozone monitor, microprocessor based controller, and all the required regulators and pneumatics. The Mini ODS ...
Manufactured by:Teledyne API based inSan Diego, CALIFORNIA (USA)
The Model W1, combined with a Model 465L Ozone Analyzer, continuously measures dissolved ozone concentrations in the liquid phase. It uses the stripping column method with advanced electronics design, to deliver highly accurate and stable readings of dissolved ozone. This dissolved ozone analyzer is typically used in measuring dissolved ozone in drinking water, wastewater and DI water ...
Manufactured by:Teledyne API based inSan Diego, CALIFORNIA (USA)
The Model T360 CO2 analyzer measures Carbon Dioxide by comparing infrared energy absorbed by a sample to that absorbed by a reference gas according to the Beer-Lambert law. Using a Gas Filter Correlation Wheel, a high-energy IR light source is alternately passed through a CO2 filled chamber and a chamber with no CO2 present. The light path then travels through the sample cell, which has a ...
Manufactured by:Teledyne API based inSan Diego, CALIFORNIA (USA)
The Model 465M is a microprocessor based medium range ozone monitor for measuring process ozone concentrations in water treatment, food processing, and research applications. The design has been specifically optimized for applications requiring the measurement of ozone at near-ambient pressure such as water treatment contactor off-gas measurement. The Model 465M has been designed to give accurate ...
Manufactured by:Teledyne API based inSan Diego, CALIFORNIA (USA)
The Model 465H is a microprocessor based high concentration ozone monitor for measuring ozone in process gas streams in water treatment, food processing, and research applications. The 465H has been designed to give accurate and stable readings over long time periods with little or no maintenance or calibration. The Model 465H is available in a NEMA 4X wall mount ...