- Home
- Equipment
Refine by
Teknik Environmental Equipment & Supplies
53 equipment items found
Manufactured by:Makro Teknik based inÜmraniye, TURKEY
Makro Teknik corner elements are produced suitable for 20-25 mm flange profiles. rovides strong flange frame. Minimize vibration effect while increases duct stability. Because of the stoper design at corners, despite the corner screws are tightened so much, blocks crashing of the duct ...
Manufactured by:Makro Teknik based inÜmraniye, TURKEY
L hanging is used with tie rod in hanging and loading system. Minimize vibration of the duct. ...
Manufactured by:Makro Teknik based inÜmraniye, TURKEY
Makro Teknik L support channel have wide range of uses in different industries. Used as assembly and support component in vertical and horizontal piping systems, ductwork fixings and hanging systems. Produced in different sizes and thickness. Can be used single or attached with other framings. Holes provide esase of installation. Alternative fixing profile used in ductworks system are given in ...
Manufactured by:Makro Teknik based inÜmraniye, TURKEY
High strength is provided by the help of the dual-shaped ...
Manufactured by:Schnell Teknik based inFrederikssund, DENMARK
Professional all-round oil skimmer with very high capacity in compact design. Ideal for larger oil removal jobs where space is limited. Can work in tough environments such as alkalis and acid. Max. temp. 90ºC ...
Manufactured by:Hydria Water AB based inBorås, SWEDEN
Energy efficient waste water treatment is the future. Biological treatment and nitrogen ammonia removal by use of trickling filters is both an environmental friendly and cost efficient process. Trickling filters are returning in popularity due to the fact that activated sludge processes are significantly higher in operational costs than a pump required for operating a rotating ...
Manufactured by:Hydria Water AB based inBorås, SWEDEN
These machines are fabricated in robust designs usually made of stainless steel. Steel bridges or concrete slabs are used to carry drive unit system. There are a variety of configurations, with or without supplementary ...
Manufactured by:Istanbul Teknik based inIstanbul, TURKEY
GeoSeal X Flex Membrane is a geomembrane material which is made of very low density polyethylene and ensures impermeability in the projects such as tunnels, foundations, green roofs, ponds, acid pools, tank areas, water tanks and irrigation channels. Safe sealing joints are created through fusion welding. The rough types increase friction with geotextile surfaces over slope surfaces, and increase ...
Manufactured by:Plan Teknik based inIstanbul , TURKEY
Pneumatic internal pipe clamp is an outward opening mechanism designed to apply a radial force out through the ...
Manufactured by:Istanbul Teknik based inIstanbul, TURKEY
In civil and military airport asphalt runways and runway conversions. In asphalt road coatings on concrete. In renewal of asphalt roads. Under new asphalt layer to be poured in areas where trench excavation has been made. In deformed highways. In asphalt applications to be poured between bridge junctions, infill junction arm and concrete bridge. It is used in the repair of all asphalt roads with ...
Manufactured by:Hydria Water AB based inBorås, SWEDEN
These machines are manufactured to a basic design and are mainly made of stainless steel. Our full-bridge and semi-bridge rotating sludge scrapers are of latticework type. There are a variety of configurations, with or without supplementary functions. The scrapers can be peripheral driven full-bridge scrapers, semi-bridge scrapers or central ...
Manufactured by:Hydria Water AB based inBorås, SWEDEN
VA Tekniks cable driven scraper cart was very common before but still some treatment plants use them. The cart is driven by torque limited cable drums mounted on same shaft. The cart runs smoothly on wheels on the bottom of the tank and is guided on a beam which keeps it on track. The scraper flight flips up and down with fixed stops at each end of the tank. All machines are delivered together ...
Manufactured by:Hydria Water AB based inBorås, SWEDEN
The maintenance of sludge scrapers is various depending on configuration and type. The main activities when completing maintenance of these mechanical machines are the transmission chain tensioning and greasing. The previous generations of scrapers are mostly of steel chain type configurations which need a lot of greasing, often there is oil escape which increases wearing on the steel roller ...
Manufactured by:Hydria Water AB based inBorås, SWEDEN
VA Teknik’s grit trap scrapers are based on the same principal as our well-known plastic chain & flight scrapers, which have been on the market for over 40 years. We have successfully installed chain & flight scrapers in aerated grit traps using our plastic chain and stainless steel scraper flights. Besides excellent corrosion resistance, the plastic chain provides a very ...
Manufactured by:Teknik Konteyner based inSancaktepe, TURKEY
240 Liter Plastic Waste Container used raw material has sunlight, heat and cold. Outer Dimension: 1060 x 580 x 740 ...
Manufactured by:Teknik Konteyner based inSancaktepe, TURKEY
The underground container system will be connected to the container system with the jack hose taken from the compressed garbage truck and it will be operated with manual ...
Manufactured by:Teknik Konteyner based inSancaktepe, TURKEY
The Above Ground Garbage Container System will automatically and manually control the container that can be operated by remote control, by the driver, by getting out of the vehicle or without getting out of the vehicle, and the control organs will be lifted from the lifting systems of the container with the on-board crane, the unloading on the vehicle will be carried out by the remote-controlled ...
Manufactured by:Schnell Teknik based inFrederikssund, DENMARK
Mixer Valve for mixing of cutting fluids and other non-corrosive fluids. Very easy to use and very accurate! Made with safety check valve which prevents back flow. With scale for easy ...
Manufactured by:Schnell Teknik based inFrederikssund, DENMARK
Professional oil skimmer for fast and efficient tramp oil removal. Max. temperature 40ºC. Easy installation and belt ...
Manufactured by:Schnell Teknik based inFrederikssund, DENMARK
Professional oil skimmer for removal of surface oils in almost all applications. Max bath temperature 80°C ...