- Home
- Equipment
Refine by
Tisch Environmental Equipment & Supplies
28 equipment items found
Manufactured by:Tisch Environmental Inc based inCleves, OHIO (USA)
The series TE-230 provides a simple, accurate, and yet low-cost means of obtaining the particle size distribution and respirable mass fraction of suspended particulates in outdoor and occupational environments. The unique slotted impactor design features the ultimate in precision, predictability, and sharpness of cut-off, combined with compactness, ease-of-use, and the lowest internal ...
Manufactured by:Tisch Scientific - Tisch International based inCleves, OHIO (USA)
This Tisch Scientific Mini Magnetic Stirrer boasts a variable-speed control, digital readout, and increased capacity to better handle your sample mixing needs. This high quality instrument is supported with a one year replacement ...
Manufactured by:Tisch Environmental Inc based inCleves, OHIO (USA)
x Stage Ambient Viable Sampler. System includes Six Aluminum Orifice Stages, Silicone O-ring Gaskets, Vacuum Pump Assembly and Carrying Case complete Single stage viable impactor operating at 28.3 LPM (Same as two ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
The Impactor Inlet is an accessory for the Aerodynamic Particle Sizer® (APS™) spectrometer. It combines a single-stage impactor with a filter to take a size-segregated sample. It then directs a small, representative sample of the initial test aerosol (diluted at 80 to 1) into the APS spectrometer for size-distribution measurement. The inlet aerosol passes through a single-stage impactor ...
Manufactured by:Tisch Environmental Inc based inCleves, OHIO (USA)
Tisch Environmental Pollen Sense (PS) portable sensors produce human readable microscopic, 3D images of airborne particles in real-time. Identification of NEW particles and expanding existing particle identification libraries is accomplished through the PS Particle Hunter (Al/ML) Platform. Continuous Learning from human correction and Al/ML analysis of real-time and historical images allows PS to ...
Manufactured by:Tisch Environmental Inc based inCleves, OHIO (USA)
Developed by the National Institute for Occupational Safety and Health (NIOSH) and manufactured by Tisch Environmental, the TE-BC251 is a wearable multi-stage bio-aerosol collector used for the collection of airborne viruses including INFLUENZA and COVID-19. This high quality, low cost cyclone is well suited for quick deployment to respond to the current rapidly evolving climate. The multi stage ...
Manufactured by:Tisch Environmental Inc based inCleves, OHIO (USA)
Industrial Hygiene Air Sampler: Complete with 10 to II cm-filter holder, flow-meter, integral handle, rubber tipped feet, polarized electrical cord, on-off switch, elapsed time Indicator, fuse, tri-pod stand, by-pass motor (110v/60hz or ...
Manufactured by:Tisch Scientific - Tisch International based inCleves, OHIO (USA)
Tisch Scientific PTFE Syringe Filters, 0.22 μm, 30 mm, Luer-Lok/Luer Slip, Nonsterile, 100 Pack, SF18322. Buy Tisch Scientific PTFE Syringe Filters, 0.22 μm, 30 mm, Luer-Lok/Luer Slip, Nonsterile, 100 Pack. Fast Shipping and Smart Support. ...
Manufactured by:Tisch Scientific - Tisch International based inCleves, OHIO (USA)
Tisch Scientific PTFE Syringe Filters, 1.0um, 30 mm, Luer-Lok/Luer Slip, Nonsterile, 100 Pack, SF18324. Buy Tisch Scientific PTFE Syringe Filters, 1.0 μm, 30 mm, Luer-Lok/Luer Slip, Nonsterile, 100 Pack. Fast Shipping and Smart Support. ...
Manufactured by:Tisch Scientific - Tisch International based inCleves, OHIO (USA)
PTFE Membrane Filters, No Support Layer, 2.0um, 37mm, 100 per pack, ...
Manufactured by:Tisch Environmental Inc based inCleves, OHIO (USA)
Particle Size Cut PM2.5 at 16.7LPM. For Ambient PM2.5 Sampling. Direct replacement for WINS. Designated PM2.5 Separator for use in ALL Commercial Federal Reference Method (FRM) and Federal Equivalent Method (FEM) Samplers ...
Manufactured by:Tisch Environmental Inc based inCleves, OHIO (USA)
Particle Size Cut PM4 at 16.7LPM. For Ambient PM4 Sampling. ...
Manufactured by:Tisch Environmental Inc based inCleves, OHIO (USA)
A Total suspended particulate sampler or TSP high volume air sampler is used for the collection of total suspended particulate matter in ambient air with no preference to size selection. The US EPA reference method for the collection of TSP is called out in 40 CFR 50, appendix B. The TSP high volume air sampler collects particulate at a flow rate between 39-60 ft/³min over a constant ...
Manufactured by:Tisch Environmental Inc based inCleves, OHIO (USA)
A PM10 high volume air sampler is a federal reference method (FRM) instrument designed to collect ambient particulate matter with an aerodynamic diameter of 10µm or less. This sampler uses a size selective inlet to separate out the particulate matter that is larger than 10µm, ensuring that only concentrations of PM10 are deposited onto the filter. These samplers typical operate with ...
Manufactured by:Tisch Environmental Inc based inCleves, OHIO (USA)
The Tisch Environmental PM2.5 high volume air sampler is a non-Federal Reference Method sampler for the collection of particulate matter that is 2.5µm or less. Its primary uses is for non regulatory sampling and institutional studies. The PM2.5 size selective inlet is made up of 40 stainless steel nozzles that allow only 2.5µm particulates to get deposited on the filter. PM2.5 ...
Manufactured by:Tisch Scientific - Tisch International based inCleves, OHIO (USA)
The Tisch N95 Disposable Respirator fits more comfortably and securely than any other N95 face masks on the market. Every detail of this respirator was refined until the H210 was quintessential, quickly being deemed the "Fit Test Champion" by those who have put it to ...
Manufactured by:Tisch Scientific - Tisch International based inCleves, OHIO (USA)
SF181130, 47mm stainless steel vacuum 1 place manifold with clamps and control valves Constructed of 316L stainless steel, they are particularly suitable for applications such as beer, beverage, pharmaceutical products bioburden test and water quality ...
Manufactured by:Tisch Scientific - Tisch International based inCleves, OHIO (USA)
SF181131, 47mm stainless steel vacuum 3 place manifold with clamps and individual control valves Constructed of 316L stainless steel, they are particularly suitable for applications such as beer, beverage, pharmaceutical products bioburden test and water quality ...
Manufactured by:Tisch Environmental Inc based inCleves, OHIO (USA)
Eight Stage Ambient Sampler System Includes: 8 Aluminum Orifice Stages, 8 Stainless Steel Collection Plates, Back up 81mm Filter Holder. 11 Silicone O-Ring Gaskets, Vacuum Pump Assembly and Carrying Case ...
Manufactured by:Tisch Scientific - Tisch International based inCleves, OHIO (USA)
VP-300 Vacuum Pump, quiet, compact, oil free, includes pressure gauge and regulator, Tisch ...